Miele G 4275 SCSF Parts list manual

Product and Cut-out Dimensions Page 1 of 3
Classic G 4275 SCSF Prefinished Fully Integrated
Dishwasher
Classic
G
4275
SCSF
Prefinished
Fully
Integrated
Dishwasher
Location Codes
C- Cutout 1 3/8” x 1 3/4” (34 mm x 35 mm) for water, drain and electric pass-through.
Adjust according to water and drain location.
D- 5 foot (1.5 meter) flexible drain hose connects lower center rear.
E- 5 foot (1.5 meter)– 120 Volt – 15 Amp 3-wire molded plug power supply connects front terminal or can be
hardwired.
W- 5 foot flexible water intake hose with a 3/8” compression fitting nut connects lower center rear.
Notes
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 11012011

Product and Cut-out Dimensions Page 2 of 3
Classic
G
4275 SCSF Prefinished Fully
Integrated
Dishwasher
Classic
G
4275
SCSF
Prefinished
Fully
Integrated
Dishwasher
Panel Prefinished
Width: 23 7/16”
(
598 mm
)
(
)
Thickness: ¾” (19 mm)
Height: 30 1/8” (765 mm)
Calculating the toe kick height
30 1/8” – HTC = TKH
HTC = Height to the underside of countertop
TKH = Toe kick height (Panel height is
configured for a 4” toe kick)
Note: Control panel is along the top edge of
the unit. It is not visible when the unit is closed.
A handle MUST be installed on the front
p
anel
p
in order to open the unit.
GFVI Installations
Miele offers pre-fabricated stainless steel panels for all fully integrated units. These panels are designed for
various toe-kick heights and offer a choice of handle options.
Drawing is not to scale Specification Sheets OJS 11012011

Product and Cut-out Dimensions Page 3 of 3
Classic G 4275 SCSF Prefinished Fully
Integrated
Dishwasher
Classic
G
4275
SCSF
Prefinished
Fully
Integrated
Dishwasher
Specification Sheets OJS 11012011