Miele Diamond G 5915 SCi Parts list manual

Product and Cut-out Dimensions Page 1 of 3
Diamond G 5915 SCi Integrated Dishwasher
Diamond
G
5915
SCi
Integrated
Dishwasher
Location Codes
C- Cutout 1 3/8” x 1 3/4” (34 mm x 35 mm) for water, drain and electric pass-through.
Adjust according to water and drain location.
D- 5 foot (1.5 meter) flexible drain hose connects lower center rear.
E- 5 foot (1.5 meter)– 120 Volt – 15 Amp 3-wire molded plug power supply connects front terminal or can be
hardwired.
W- 5 foot flexible water intake hose with a 3/8” compression fitting nut connects lower center rear.
Notes
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 11012011

Product and Cut-out Dimensions Page 2 of 3
Diamond G 5915 SCi Integrated Dishwasher
Width:
23 7/16
”
(598 mm) in all cases
Custom Panel Installations
Some Miele dishwashers do not come equipped with a front panel. These dishwashers are designed to accept a
custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the
dishwasher to align with the surrounding cabinets.
Diamond
G
5915
SCi
Integrated
Dishwasher
Width:
23
7/16
(598
mm)
in
all
cases
Thickness: ¾” (19 mm) in all cases
Height: Determined using the following
calculation:
Panel Height = HTC – CPH – TKH
HTC = Height to the underside of countertop
CPH = Control panel height (Note 1)
TKH = Toe kick height
Note:
Control panel height is determined by the
Miele Integrated
Dishwasher
Note:
Control
panel
height
is
determined
by
the
height of the adjoining drawers in the cabinets.
The height is adjustable between 4 5/8” and 5
7/8” (116-150 mm) with spacer strips provided.
Maximum panel height: 27 1/4” (692 mm)
Minimum panel height: 21 1/4” (540 mm)
Maximum panel weight:
23 Pounds (10 4 kg)
GDU Kit Installations
Miele offers pre-fabricated panels for all integrated units called GDU kits. These panels are designed for various
toe-kick heights and include a black plastic toe kick cover.
Maximum
panel
weight:
23
Pounds
(10
.
4
kg)
GDU 60/65-1 4” Toekick GDU 60/60-1 6” Toekick
This GDU accepts a
custom insert:
Height: 25 11/16” (650 mm)
Width 23 1/8” (587 mm)
Thick 1/8” (3 mm)
This GDU accepts a
custom insert:
Height: 23 5/8” (600 mm)
Width 23 1/8” (587 mm)
Thick 1/8” (3 mm)
Drawing is not to scale Specification Sheets OJS 11012011
Exposed toe-kick Exposed toe-kick

Product and Cut-out Dimensions Page 3 of 3
Diamond G 5915
SCi
Integrated Dishwasher
Diamond
G
5915
SCi
Integrated
Dishwasher
Specification Sheets OJS 11012011