Miele PT 5136 OS User manual

Installation Plan
Vented Dryer
PT 5136
PT 7136
Read all operation and installation instructions prior to
assembly, installation, and initial operation
to prevent injury and machine damage.
en - US
10 145 530 / 01

2 10 145 530 / 01
Legend:
Connection required
Connection optional or required for
a specific model
AL
Exhaust air
KLZ
Cooling air inlet
ASK
Condensate drain hose
PA
Equipotential bonding
B
Appliance fastening
SLA
Peak load connection
EL
Electrical connection
UG
Base, closed
F
Adjustable appliance mounts
UO
Base, open
KG
Payment device
WTV
Washer/dryer connection
KGA
Payment device connection
XKM
Communication module
KLA
Cooling air outlet
ZL
Inlet air
Alteration rights reserved 08/14/167

PT 5136/7136 en -
10 145 530 / 01 3
Appliance Dimensions

en - PT 5136/7136
4 10 145 530 / 01
Installation

PT 5136/7136 en -
10 145 530 / 01 5
Washer/Dryer Stack

en - PT 5136/7136
6 10 145 530 / 01
Assembly

PT 5136/7136 en -
10 145 530 / 01 7
Assembly

en - PT 5136/7136
= standard, = optional, + = only upon enquiry, - not available
8 10 145 530 / 01
Technical data
PT 5136
PT 7136
Drying system
Exhaust air
Exhaust air
Drum volume
130 l
130 l
Filling weight
14.3 lb (6.5 kg)
14.3 lb (6.5 kg)
Loading door, diameter
15 3/8“ (391 mm)
15 3/8“ (391 mm)
Electrical connection (EL)
Standard voltage (US)
3 AC 208 V
-
Frequency
60 Hz
-
Total connections
6.4 kW
-
Fusing
3 x 30 A
-
Connection cable, minimum cross-section
3/16 in² (4 mm²) x
AWG 10
-
Connection cable incl. plug

-
Connection cable, length
6‘ 6 ¾“ (2000 mm)
-
Alternative voltage (can be retrofitted)
2 AC 208 V
-
Total connections
4.3 kW
-
Fuse protection
2 x 30 A
-
Connection cable
1/8“ (3 mm) x
AWG 10
-
Standard voltage (CDN)
3 AC 208 V
3 AC 208 V
Frequency
60 Hz
60 Hz
Total connections
6.4 kW
6.4 kW
Fuse protection
3 x 30 A
3 x 30 A
Connection cable, minimum cross-section
3/16 in² (4 mm²) x
AWG 10
3/16 in² (4 mm²) x
AWG 10
Connection cable without plug for permanent wiring


Connection cable, length
6‘ 6 ¾“ (2000 mm)
6‘ 6 ¾“ (2000 mm)
Alternative voltage (can be retrofitted)
2 AC 208 V
2 AC 208 V
Total connections
4.3 kW
4.3 kW
Fuse protection
2 x 30 A
2 x 30 A
Connection cable
1/8“ (3 mm) x
AWG 10
1/8“ (3 mm) x
AWG 10
Exhaust air (AL)
Connecting piece (external diameter)
4“ (100 mm)
4“ (100 mm)
Max. exhaust air temperature
176°F / 80°C
176°F / 80°C
Electric connection with 50 Hz
Max. permissible pressure loss
320 Pa
320 Pa
Max. volume flow rate without back-pressure (0 Pa) in exhaust air operation
300 m³/h
300 m³/h
Electric connection with 60 Hz
Max. permissible pressure loss
480 Pa
480 Pa
Max. volume flow rate without back-pressure (0 Pa) in exhaust air operation
340 m³/h
340 m³/h
Equipotential bonding (PA)
Appliance connection (with assembly kit)


Peak load/energy management (SLA)
Appliance connection (with separate kit)


Connection voltage of the control contacts
230 V
230 V
Payment device connection (KGA)
Connection of payment devices


Communication module (XKM)
RS 232 interface (XKM module retrofit kit)


Installation with device mount (F)
Number of device mounts
Number
4
4
Device mount, threaded height adjustment
+9/16“ -1/4“
(+14.5 mm / -7 mm)
+9/16“ -1/4“
(+14.5 mm / -7 mm)
Device mount diameter
1 9/16“ (40 mm)
1 9/16“ (40 mm)

PT 5136/7136 en -
= standard, = = optional, + = only upon enquiry, - not available
10 145 530 / 01 9
Technical data
PT 5136
PT 7136
Mounting (B)
Floor mounting, standard
Mounting kit (for 2 device mounts) with mounting bracket


Wood screw as per DIN 571
¼“ x 2“ (6 x 50 mm)
¼“ x 2“ (6 x 50 mm)
Dowel (diameter x length)
5/16“ x 1 9/16“
(8 x 40 mm)
5/16“ x 1 9/16“
(8 x 40 mm)
Floor mounting, Miele base
Floor mounting, Miele base (fasteners supplied with product)


Required fastening points
Number
4
4
Wood screw as per DIN 571
5/16“ x 2 9/16“
(8 x 65 mm)
5/16“ x 2 9/16“
(8 x 65 mm)
Dowel (diameter x length)
½“ x 2 3/8“
(12 x 60 mm)
½“ x 2 3/8“
(12 x 60 mm)
Floor mounting, elevated platform (user-provided)
Floor mounting on user-supplied platform (concrete or masonry)


Min. platform surface (W/D)
23 5/8“ / 25 9/16“
(600 mm / 650 mm)
23 5/8“ / 25 9/16“
(600 mm / 650 mm)
Wood screw as per DIN 571
¼“ x 2“ (6 x 50 mm)
¼“ x 2“ (6 x 50 mm)
Dowel (diameter x length)
5/16“ x 1 9/16“
(8 x 40 mm)
5/16“ x 1 9/16“
(8 x 40 mm)
Appliance data
Overall appliance dimensions (H/W/D)
2‘ 9 1/16“ /
1‘ 11 5/8“ / 2‘ 4“
(850/600/709)
2‘ 9 1/16“ /
1‘ 11 5/8“ / 2‘ 4“
(850/600/709)
Housing dimensions (H/W/D)
2‘ 9 7/16“ / 1‘ 11
7/16“ / 2‘ 3 7/16“
(850/595/697)
2‘ 9 7/16“ / 1‘ 11
7/16“ / 2‘ 3 7/16“
(850/595/697)
Transport dimensions (H/W)
Min. entry opening (without packaging)
2‘ 11 7/16“ /
1‘ 11 5/8“
(900 mm/600 mm)
2‘ 11 7/16“ /
1‘ 11 5/8“
(900 mm/600 mm)
Installation dimensions
Min. clearance appliance to side
¾“ (20 mm)
¾“ (20 mm)
Recommended clearance appliance to side, washer/dryer stack
11 13/16“ (300 mm)
11 13/16“ (300 mm)
Min. wall clearance from appliance front
2‘ 11 7/16“
(900 mm)
2‘ 11 7/16“
(900 mm)
Recommended min. wall clearance from appliance front
3‘ 7 5/16“
(1100 mm)
3‘ 7 5/16“
(1100 mm)
Weights and loads
Appliance weight (net weight)
128 lb / 58 kg
128 lb / 58 kg
Max. floor load during operation
670 N
670 N
Appliance emissions
Emission sound pressure level at a workplace
< 70 dB(A)
< 70 dB(A)
Heat emission into the installation space
215 W
215 W
Options / Accessories
Features
Base, closed (UG)
Base closed, H 11 13/16“ (300 mm) (UG 5005)
Base galvanized, stainless steel side panels
Base closed, H 18 ½“ (470 mm) (UG 5005-47)
Base galvanized, "octoblue" heat cure coated side panels
Base closed, H 29 ½“ (750 mm) (UG 5005-75)
Base galvanized, "octoblue" heat cure coated side panels
Base, open (UO)
Base open, H 11 13/16“ (300 mm) (UO 5005)
Base galvanized, "octoblue" heat cure coated surface
Base open, H 18 ½“ (470 mm) (UO 5005)
Base galvanized, "octoblue" heat cure coated surface
Washer/Dryer connection (WTV)
Stainless steel kit (WTV 5062)
Kit for the connection of washer and dryer
"Lotus white" kit (WTV 5061)
Kit for the connection of washer and dryer
Payment devices (KG)
Single-unit operation (C 4060)
Payment device, program operation only
Single-unit operation (C 4065)
Payment device, time and program operation

en - PT 5136/7136
= standard, = optional, + = only upon enquiry, - not available
10 10 145 530 / 01
Options / Accessories
Features
Single-unit operation (C 4070)
Payment device for coins or tokens, time and program operation
Single-unit operation (C 5200 BT)
Payment device for debit card
Accessories
Peak load/energy management kit (BSS)
Connection for peak load and energy management functions
Equipotential bonding kit
Assembly kit (Mat. No. 09439350), to be ordered from customer service
XKM communication module (XKM RS 232-10)
Retrofit kit XKM module with RS 232 incl. installation kit