Miele PT 7137 WP Vario User manual

Commissioning, Programme chart
and Settings
PT 7137 WP Vario
To avoid the risk of accidents or damage to the
appliance, it is essential to read these
instructions before it is installed and used for the
first time.
en-GB
M.-Nr. 09 867 000

Contents
2
Commissioning the tumble dryer ......................................................................... 3
Programme overview........................................................................................... 10
To open the Settings/Supervisor menu ............................................................. 16
Settings................................................................................................................. 18
Language ............................................................................................................ 18
Sort languages....................................................................................................... 18
Language menu ..................................................................................................... 18
Supervisor Level .................................................................................................... 19
Favourites............................................................................................................... 19
Anti-crease action.................................................................................................. 19
Buzzer .................................................................................................................... 19
Time ....................................................................................................................... 20
Contrast ................................................................................................................. 20
Brightness.............................................................................................................. 20
Standby.................................................................................................................. 20
Extended cool down.............................................................................................. 21
Save ....................................................................................................................... 21
Temperature unit .................................................................................................... 21
Drying levels........................................................................................................... 22
Clean out airways .................................................................................................. 22
Display residual moisture....................................................................................... 23
Delay start.............................................................................................................. 23
Controls.................................................................................................................. 24
Logo....................................................................................................................... 24
Target groups......................................................................................................... 24
Demo programme.................................................................................................. 25
Settings which can only be changed during the commissioning process ............ 26
Payment system..................................................................................................... 26
Coin mechanism lock ............................................................................................ 26
Signal at pin 7 ........................................................................................................ 26
T-max exceeded .................................................................................................... 27
Duration cool air..................................................................................................... 27
Cool air free of charge ........................................................................................... 27
Duration hot air ...................................................................................................... 27
Supervisor level code............................................................................................. 27

Commissioning the tumble dryer
3
Before using for the first time
Before commissioning the tumble dryer, ensure that it
is correctly installed and connected. Read the separate
Operating and installation instructions as well as this
booklet.
The commissioning process must be carried out in full to
determine the settings for daily operation.*
*Some settings can only be altered during the commissioning
process. After that, these can only be changed by a Miele
service technician.
Setting the language J

čeština
dansk
ελληνικά
Settings
deutsch
Language
Turn the multi-function selector to highlight the language of
your choice.
Press the multi-function selector to confirm your choice of
language.
OK
Use this language?
Back 

Turn the multi-function selector to select OK and confirm by
pressing the multi-function selector.
If you wish to select a different language:
Select and confirm Back.

Commissioning the tumble dryer
4
To set the time of day
The time of day may already have been set at the factory. If it
has, and it is correct, you can skip this section. It is possible
to alter the time at any stage via the Settings menu.
24 h clock...
12 h clock...
Time not displayed
Settings
Time of day
Back 
Confirm either 24 h or 12 h. If you confirm Time not
displayed, the following step will be skipped.
Set the time of day
9: 00
Use the multi-function selector to select the hour and press
it to and confirm your selection.
Then set the minutes.
Pressing the multi-function selector again saves the time of
day in memory.

Commissioning the tumble dryer
5
Determining target groups
You can if you wish confirm the target group Household. Then
you will be offered the Automatic programme in addition to the
basic programmes.
Settings
Target groups
Household
Confirm selection

Use the multi-function selector to select and confirm
Household, if the Automatic programme is also required.
Your selection will be indicated with a tick: .
Select and finally confirm Confirm selection.

Commissioning the tumble dryer
6
Each of these settings must now be
confirmed (and altered if required).
More details about the settings are
given at the end of this book.
Place a cross in the box to indicate
your selection, or fill in the gaps
_____ as required.
Display contrast
The contrast can be altered in 10
graduated steps.
Select display contrast.
– Step _____ (1 to 10)
Display brightness
The brightness can be altered in 10
graduated steps.
Select display brightness.
– Step _____ (1 to 10)
Payment system
Settings for coin operation.
Select the appropriate option.
–No payment system
The Coin mechanism lock setting, for
operating the machine with a
payment system, is skipped.
–Programme operation
The machine is operated using a coin
box.
–Timed operation
The machine is coin operated using a
time meter.
–RS 232
When the tumble dryer is coin-
operated, serial interface RS 232 is
activated (optional accessory).
–IK6
When the tumble dryer is coin
operated, serial interface RS 232 is
activated for IK6 (optional
accessory).

Commissioning the tumble dryer
7
Additional settings "Payment
system/Coin box"
Select the option you want.
–Coin mechanism lock
Time in which settings can be altered
without losing coins.
–Off
–Immediately after starting (the
programme)
–_____ min(s) after starting (the
programme)
–Signal to pin 7
Setting the feedback signal for the
coin box.
–Programme end
–Release the start button
–Start and programme end
–T-max. exceeded
Setting a security time margin to
prevent the coin box being tampered
with.
–____ minutes
–Duration cool air
This determines the maximum
programme duration in control
options WS short cut keys, ex/int
time
–____ minutes
–Cool air free
The programme can be started
without payment.
–On
–Off
–Duration hot air
This determines the maximum
programme duration in control
options WS short cut keys, ex/int
time
–____ minutes
Supervisor level code
The Settings/Supervisor level menu can
be locked with a code to prevent it
being accessed by unauthorised
personnel (the Language Jsetting can
still be altered).
Select the option you want.
–Code not required.
Only some of the settings can be
changed (temporary Language
setting, Anti-crease, Buzzer, Time of
day, Contrast, Brightness, Standby,
Extended cool down, Memory).
These settings can be changed by all
users.
Other settings can only be changed by
a Miele service technician.
–Code required.
A code must be entered in order to
change the settings. All settings (see
"Settings menu" can be changed.
Select this option if you want users
only to be able to change settings via
a code.

Commissioning the tumble dryer
8
To repeat the commissioning process
If you are not certain that all of the settings are correct, you
will need to repeat the commissioning process.
OK
Back  
Set up successful
Select Back and confirm your selection.
The commissioning process must be carried out again.
To finish the commissioning process
1. Confirm
If you are sure that all of the settings are correct.
OK
Back 

Set up successful
Confirm with OK.
The entry menu will appear.

Commissioning the tumble dryer
9
1
2
3
410:00
Cottons
Minimum iron
Woollens
Smoothing
Programme selection
Settings 
...
...
To complete the commissioning process, a programme has
to be started for the first time.
2. Start the cool air programme
To complete the commissioning process, the Cool air
programme has to be started for the first time.
If the power to the tumble dryer is switched off before the
first programme is started, (e.g. by pressing the button),
the commissioning process can be repeated. The
commissioning process is only completed once the first
programme cycle (at least 20 minutes) has finished.
Select Cool air and confirm your selection.
The menu for the cool air programme appears
Press the flashing Start button.
After this programme has finished, the tumble dryer is ready
for use.

Programme overview
10
Basic programmes
Cottons Standard** Max. 6.5 kg*
Use for Cotton items such as those described under Cottons Normal with
normal residual moisture.
Note – Items are dried to a Normal level only.
– The Cottons Standard programme is the most energy-
efficient for drying cotton items with normal residual moisture
levels.
Cottons Max. 6.5 kg*
Extra dry, Normal+, Normal
Use for – Single and multi-layered cotton items.
– Towelling, T-shirts, underwear, jersey bed linen, baby clothes.
– Workwear, jackets, cotton blankets, aprons, tea towels, bed linen,
towels, table linen.
Note – Select Extra dry for multi-layered and very thick fabric.
– Do not use Extra dry for jersey fabrics (e.g. T-shirts, underwear),
as they have a tendency to shrink.
Gentle
tumble Optional
Hand iron , Hand iron , Machine iron
Use for – Cotton and linen fabrics.
– Table linen, bed linen, starched laundry.
Note To prevent laundry from drying out it should be rolled up until you
are ready for ironing.
Gentle
tumble Optional
*Weight of dry items
** Note for Test Institutes:
Test programme in accordance with Regulation 392/2012/EU for energy labelling
measured in accordance with EN 61121.

Programme overview
11
Minimum iron Max. 3.5 kg*
Normal+, Normal, Hand iron 
Use for – Minimum iron items made of cotton, synthetic or mixed fibre.
– Workwear, overalls, pullovers, dresses, trousers and table linen.
Gentle
tumble Optional
Woollens Max. 2.5 kg*
Use for Woollen garments and fabrics containing wool blends, e.g.
pullovers, jackets.
Note: – Wool and wool blend items are only fluffed up; they are not dried
completely.
– Remove garments as soon as the programme has finished and
leave to finish drying at room temperature.
Smoothing Max. load: 3.0 kg*
Use for – Cotton and linen fabrics.
– Minimum iron items made of cotton, synthetic or mixed fibre, e.g.
trousers, jackets, shirts.
Note: – Smooths out creasing caused during the spin cycle in the washing
machine.
– Items are not dried completely in this programme.
– Remove garments as soon as the programme has finished and
leave to finish drying at room temperature.
*Weight of dry items

Programme overview
12
Cool air (10-120 min) Max. 6.5 kg*
Use for – Any item which only needs airing.
Warm air (15-60 min) Max. 6.5 kg*
Use for – Multi-layered fabrics whose layers have different drying
characteristics,
– Voluminous items e.g. jackets, pillows and padded items,
– For drying individual items,
– Bath towels, swimwear, tea-towels.
Gentle
tumble Optional
Denim Max. 3.5 kg*
Normal, Hand iron 
Use for Denim garments, e.g. jeans, jackets, skirts, shirts.
Gentle
tumble Optional
Shirts Max. 2.5 kg*
Normal, Hand iron 
Use for Shirts and blouses.
Gentle
tumble Optional
Outerwear Max. 3.5 kg*
Normal, Hand iron 
Use for Outdoor clothing suitable for drying in a tumble dryer.
*Weight of dry items

Programme overview
13
Delicates Max. load: 4.0 kg*
Normal+, Normal, Hand iron 
Use for – Delicate cotton, synthetic and mixed fibre fabrics.
– Lightweight pullovers, dresses, trousers, overalls, table cloths,
shirts and blouses.
– Lingerie and appliquéd fabrics.
Note: – Low creasing
– Reduce load size for particularly low levels of creasing.
Towelling Max. 6.5 kg*
Normal+
Use for – Large quantities of single-layered and multi-layered towelling
items.
– Towels, bath robes, face flannels, jersey bed linen.
Silks Max. 1.5 kg*
Use for Silk garments which are suitable for drying in the tumble dryer:
blouses, shirts
Note: – This programme reduces creasing. Items are not dried completely
by this programme.
– Remove garments as soon as the programme has finished and
leave to finish drying at room temperature.
Pillows Max. 2.5 kg*
Normal
Use for – Pillows suitable for drying in a tumble dryer, with feather, down or
synthetic fillings.
– 2 pillows 80x80 cm
Note: Please observe the instructions on the care label. Pillows can still
feel damp after being dried. You can use this programme several
times until the pillow feels dry.
*Weight of dry items

Programme overview
14
Basket programmes (20-90 min) Max. load in the basket 3.0 kg
Note: – The drying basket (optional accessory) must be in place when
items are dried or aired using this programme.
– Danger of damage when the drum rotates. Do not place large
items in the drying basket (e.g. long boots or large bags) which
could come into contact with the drum or the drum ribs.
– Sleeves, belts and ties should be folded in or secured so that they
are completely contained within the drying basket.
– Use this programme to dry items which are suitable for drying in a
tumble dryer but which are not suitable for drying using
mechanical action.
– It is essential to observe the operating instructions supplied with
the drying basket.
Fabric
type/items See the operating instructions supplied with the drying basket.
Household
Automatic Max. 3.5 kg*
Normal+, Normal, Hand iron 
Use for – Mixed loads of garments suitable for the Cottons and Minimum
iron programmes. Sort according to colour.
*Weight of dry items

15
Settings menu for changing standard settings
Default settings can be altered to adapt the tumble dryer to different
requirements.
Depending on the programmable status, the Settings/Supervisor menu can be
locked with a code to prevent it from being accessed by unauthorised personnel
(the Language Jsetting can still be altered).
– Code not required.
Some settings, which may be changed by all users are visible (Settings Jmenu).
– Code required.
All settings may be changed (Settings/Supervisor menu)
Contact the Miele Service Department for details.
Note regarding the commissioning of the tumble dryer
The tumble dryer must be commissioned as described at the beginning of this
booklet.

To open the Settings/Supervisor menu
16
Open the Settings Jmenu
If the Settings menu is not locked, some of the settings may
be changed.
1
2
3
410:00
Cottons
Minimum iron
Woollens
Smoothing
Programme selection
Settings 
...
...
Select Settings Jfrom the entry menu and confirm your
selection with the multi-function selector.
To select a setting

Back
Language
Anticrease
Buzzer

Settings

Select the setting you want to change, and confirm your
selection.
To close the Settings menu
Select Back and confirm your selection. The display will
revert to the entry menu.

To open the Settings/Supervisor menu
17
To open the Settings menu via the Supervisor level
The Settings menu can be locked against unauthorised use
(the Language Jcan still be changed). It can then only be
accessed at Supervisor level by entering a code.
Back
Access via code
Change code

Settings
Supervisor level
Select Access via code and confirm your selection.
Enter code
Enter the digits 0 0 0 (factory default setting). If you enter
the code wrongly three times, the tumble dryer will lock out
for an hour.
Enter code
0_ _
Turn the multi-function selector until the first number
appears. Then press it to confirm your selection of this
number.
Repeat this process until all three numbers have been
entered.
After you have entered the last number you need to confirm
the code:
Confirm code
0 0 0
OK
Back 

Confirm the code.
The Supervisor level is now accessed.

Settings
18
Language 
The display can be set to appear in
one of several different languages.
To select the language you want, go to
the Languages sub-menu.
Select the language you want and
confirm your selection.
– The flag after the word Language
acts as a guide to prevent a language
which will not be understood from
being set.
– The different language setting will
only apply to the programme
currently in use. After the programme
has finished the display will revert to
the default language which was set in
the Settings/Supervisor menu.
– If after setting a new language no
further entries are made for approx.
15 seconds the display will revert to
the previously set language.
Sort languages
You can select the order that you want
the first 4 languages available to
appear in in the display if you have
first selected the International or
International, 4 langs option from the
Language menu in the Settings menu.
Select and confirm the position of the
language which is to be moved.
Select and confirm the new
language.
Language menu
You can select whether you want an
additional welcome screen asking for
a language to be selected to appear
again after the end of a programme
and before the entry menu.
There are three options:
–National
No additional welcome screen
(factory default)
–International:
The welcome screen will appear and
the language must then be selected.
Any available language can be
selected. Follow the Sort languages
setting.
–International, 4 languages:
The welcome screen will appear and
the language must then be selected.
One of four languages can be
selected. Follow the Sort languages
setting.

Settings
19
Supervisor Level
You can alter the access code to the
supervisor level.
Enter the current code.
Enter a new code.
After you have confirmed the new code,
the display will change to the beginning
of the Settings menu.
Favourites
The 12 programmes of the programme
main menu can be configured for the
control options WS-shortcut keys +
Logo (only in conjunction with the
setting control option WS-shortcut
keys + Logo).
Any programme available on the
machine can be selected. The first
three programmes in this list are
allocated to short-cut buttons 1 - 3.
For example, to change a programme
on the list:
Select and confirm the Favourites
setting.
Select a programme from the list.
Alter one or more components
(Programme name, Gentle tumble,
Drying levels, Duration).
Press short cut button FSave.
The programme, with changes, is now
saved in the list.
Anti-crease action
At the end of the programme the drum
will continue to rotate at intervals for
two hours to prevent laundry creasing,
if you do not wish to remove it
immediately.
–Off (factory default)
–1 h
–2 h
Buzzer
If the buzzer function has been
activated, an audible signal sounds at
the end of a programme.
–Off (default setting)
If a fault is registered, the buzzer
operates even if it has been
deactivated.
–Normal
The buzzer sounds at the end of the
programme.
–Loud
The buzzer sounds at maximum
volume at the end of a programme.

Settings
20
Time
First decide whether you want the
clock displayed as a 24 hour or 12
hour clock, or not to display it at all.
Then set the current time of day.
–24 h clock or 12 h clock
Once the clock display has ben
selected, the time of day can be set.
To set the time (of day)
Use the multi-function selector to
select the current hour and confirm
your selection.
Use the multi-function selector to
select the current minutes and
confirm your selection.
–Time not displayed
If Delay start is activated, (see
Settings Delay start), then the timer
will only show the option Start in or
Finish in in hours/minutes.
Contrast
Brightness
There are ten different display contrast
and display brightness settings.
The bar chart shows you the setting.
–Factory default: medium
Standby
To save energy, the display goes out
after 10 minutes and the Start button
flashes slowly.
The display is switched on again by
touching the multi-function selector or
or one of the short-cut buttons, without
any effect on any programme that is
running.
–On
Standby comes on:
. . . if a programme is not selected.
. . . after the Start button has been
pressed in a programme that is
running.
. . . after the end of a programme.
–Not in current programme (factory
default setting)
Standby is switched on if no
programme selection is made after
the end of a programme.
–Off
The display remains on all the time.
Please note:
This setting results in increased
energy consumption.