Miele PT 8257 WP User manual

PT8257WP
PT8337WP
en Operating and installation instructions Commercial heat-pump dryer
nl Gebruiksaanwijzing en opstellingsinstructies Professionele warmte-
pompdroger
M.-Nr. 07 986 863

en - Contents
2
Caring for the environment ................................................................................................4
Tips for saving energy ........................................................................................................... 4
Warning and Safety instructions........................................................................................5
Appropriate use..................................................................................................................... 5
Technical safety..................................................................................................................... 6
Correct use............................................................................................................................ 7
Using accessories ................................................................................................................. 8
Description of the machine ................................................................................................9
PT8257/8337WP ................................................................................................................. 9
Controls............................................................................................................................... 10
Function buttons ................................................................................................................. 11
Operator programme card................................................................................................... 11
Drying .................................................................................................................................13
Before commissioning......................................................................................................... 14
Switching on the tumble dryer ............................................................................................ 14
Loading laundry into the tumble dryer ................................................................................ 14
Load capacities (dry weight) ............................................................................................... 15
Closing the drum door ........................................................................................................ 15
Selecting a programme ....................................................................................................... 15
Selecting the additional “Block+” function ................................................................... 16
Starting a drying programme without making changes ...................................................... 16
Making changes to the drying programme before starting it .............................................. 16
Changing the load capacity ........................................................................................... 17
Changing the temperature.............................................................................................. 17
Changing the residual moisture target ........................................................................... 18
Starting a drying programme ......................................................................................... 18
End of programme............................................................................................................... 18
Removing the laundry ......................................................................................................... 19
Checking the fluff filter ........................................................................................................ 19
Switching off the tumble dryer ............................................................................................ 19
Drying in programme card or coin operation mode.......................................................20
Programme card operation mode ....................................................................................... 20
Resolving programme card errors....................................................................................... 21
Laundry load card operation ............................................................................................... 21
Drying with payment system C4060/C4065/C4070......................................................... 21
Additional functions ..........................................................................................................22
Changing the language ....................................................................................................... 22
Setting a start time .............................................................................................................. 22
Setting the start time...................................................................................................... 23
Setting the start date...................................................................................................... 23
Starting the programme at the set start time ................................................................. 23
Cancelling the start time ................................................................................................ 23
Stopping a programme ....................................................................................................... 23
Cancelling a programme ..................................................................................................... 24
Skipping a programme (skipping programme blocks) ........................................................ 24
Displaying programme information ..................................................................................... 25
Programme overview ........................................................................................................26
Standard programmes ........................................................................................................ 26

en - Contents
3
Special programmes for duvets .......................................................................................... 26
Special programmes for contract cleaners ......................................................................... 27
Special programmes for the fire brigade............................................................................. 27
Special programmes for dry cleaners ................................................................................. 27
Special programmes for riding stables ............................................................................... 28
Optional modules ..............................................................................................................29
Operating data..................................................................................................................... 29
Total data menu option................................................................................................... 30
Programme data menu option........................................................................................ 30
Delete data menu option................................................................................................ 31
Information on peak-load negotiation ................................................................................. 32
Problem solving guide ......................................................................................................33
Error messages ................................................................................................................... 33
Fault diagnosis .................................................................................................................... 33
Service................................................................................................................................. 35
Cleaning and maintenance...............................................................................................36
Fluff filter.............................................................................................................................. 36
Tumble dryer........................................................................................................................ 37
Heat exchanger ................................................................................................................... 38
Installation and connection ..............................................................................................40
Installation requirements ..................................................................................................... 40
General operating conditions .............................................................................................. 40
Transport ............................................................................................................................. 40
Installing the heat-pump ..................................................................................................... 41
Installation ........................................................................................................................... 43
Securing the machine.......................................................................................................... 44
Electrical connection ........................................................................................................... 45
Air intake vent...................................................................................................................... 46
Air outlet vent ...................................................................................................................... 47
Condensate drainage .......................................................................................................... 47
Optional accessories ........................................................................................................48
Payment system.................................................................................................................. 48
XKMRS232 communication module ................................................................................. 48
Dimensions ........................................................................................................................49
Technical data....................................................................................................................50
Short instructions PT8257/8337WP ...............................................................................51
1. Preparing the laundry ...................................................................................................... 51
2.Switching on the tumble dryer and loading the laundry ................................................. 51
3.Selecting the drying programme ..................................................................................... 51
4.Starting a drying programme .......................................................................................... 51
5.Removing the laundry at the end of the programme ...................................................... 52
6.Switching off the tumble dryer ........................................................................................ 52

en - Caring for the environment
4
Tips for saving energy
This heat-pump tumble dryer offers the
latest technological features. These help
reduce its energy consumption during dry-
ing by about 50% compared to the energy
consumption of conventional electrically
heated tumble dryers.
The following tips will help you to make fur-
ther savings in energy consumption:
– Make sure your laundry is spun in the
washing machine at the maximum spin
speed.
– Carry out the final rinse in the washing
machine with hot water. This results in a
lower residual moisture content and in-
creased residual heat in the laundry after
washing. This reduces the time required
for drying and thus saves energy.
– Sort the laundry:
- by fibre and weave,
- by the required level of drying,
- by residual moisture.
– Dry the maximum amount specified for
the drying programme whenever possible.
Energy consumption is more economical
for a full load. Partial loads are not eco-
nomical. Over loading the drum hampers
drying results and affects the finish.
– The drying process is more efficient with a
clean fluff filter and heat-exchanger. This
reduces the time it takes to dry the laun-
dry as well as the amount of energy re-
quired.
– Ensure sufficient room ventilation.

en - Warning and Safety instructions
5
Appropriate use
 This tumble dryer is intended only for use in a commercial environment.
This tumble dryer complies with current safety requirements. Inappropriate use can,
however, lead to personal injury and damage to property.
It is essential to read these operating instructions before using the tumble dryer for the
first time. They contain important information for your safety, as well as information on
using and maintaining the tumble dryer. This prevents both personal injury and damage
to the machine.
 This tumble dryer is only intended for drying fabrics which have been washed in a water
solution, and marked on the manufacturer's care label as being suitable for tumble drying.
Any other applications may be dangerous. Miele cannot be held liable for damage resulting
from incorrect or improper use or operation.
 To prevent the risk of fire, do not dry the following items in the tumble dryer:
– Items that have not been washed.
– Items that have not been thoroughly cleaned and are still soiled with grease, oil or other
deposits (such as cooking oils, cosmetics, lotions, etc). If items have not been thor-
oughly cleaned, there is a danger that they might ignite when heated, even after they
have been removed from the tumble dryer at the end of the programme.
– Items (e.g. mops and floor cloths) that have been treated with inflammable cleaning
agents or which contain residues of acetone, alcohol, benzene, petrol, kerosene, stain
remover, turpentine, wax and wax remover or other chemicals.
– Items that have been cleaned using industrial chemical agents (e.g. professional dry-
cleaning agents).
– Items that have been splashed with hair lacquer, hair spray, nail varnish remover or sim-
ilar substances.
Heavily soiled laundry must be washed particularly thoroughly to prevent a risk of fire.
Increase the cleaning agent dosage and select a higher wash temperature.
Wash the laundry several times if necessary.
 If the tumble dryer is to be operated in an area accessible to the public, the supervisor
must ensure that it can be operated safely without risk of danger to others.
 The tumble dryer must not be used in a non-stationary location (e.g. on a ship).

en - Warning and Safety instructions
6
Technical safety
 This tumble dryer must only be set up and commissioned by a Miele Service technician
or authorised Miele Service Dealer.
 Before installation check the tumble dryer for any obvious damage. A damaged tumble
dryer must not be installed and/or used.
 The electrical safety of this tumble dryer can only be guaranteed when correctly earthed.
It is essential that this standard safety requirement is met. If in any doubt, please have the
on-site wiring system tested by a qualified electrician. Miele cannot be held liable for the
consequences of an inadequate earthing system (e.g. electric shock).
 The tumble dryer is only electrically disconnected from the power supply, if
– the plug has been disconnected from the socket.
– it is switched off at the main switch, or the mains electrical fuse is disconnected (on
site).
 Tumble dryers with damage to the control panel or wire insulation must not be used until
they have been repaired.
 Unauthorised repairs could result in unforeseen dangers for the user, for which Miele
cannot accept liability. Repairs should only be undertaken by a Miele approved service
technician, otherwise any subsequent damage will not be covered by the guarantee.
 Faulty components must only be replaced by genuine Miele original spare parts. The
safety standards of the tumble dryer are guaranteed only when these parts are fitted.
 Do not operate the tumble dryer in a room where cleaning machines operate with
solvents containing CFCs. During combustion, any vapours that are emitted will break
down into hydrochloric acid, leading to consequential damage affecting laundry and the
machine. Air exchange must not take place between rooms if machines are set up in sep-
arate rooms.
 Only allow clean, fresh air to be fed into the tumble dryer. Air entering the machine must
not contain vapours with chlorine, fluorine or other solvents.
 The air intake vent is found on the rear of the tumble dryer. The exhaust vent is found in
the lid. Under no circumstances should these vents be sealed or covered by objects (e.g.
laundry baskets, blankets or towels) (see installation instructions).
 Never use or store benzine, petrol or any easily flammable liquid near to the tumble
dryer. Otherwise, there is a risk of fire and explosion.
 The tumble dryer must be serviced in a timely and professional manner. Otherwise,
there is a potential risk of loss in performance, faults and fire.
 This tumble dryer contains fluorinated greenhouse gases as a refrigerant. They are her-
metically sealed. Designation: R 134a
 Do not damage, remove or bypass the safety features and control elements of the
tumble dryer.
 Only operate the tumble dryer when all removable outer panels are in place so that it is
impossible to touch an electrical component or moving part.

en - Warning and Safety instructions
7
Correct use
 The tumble dryer may only be operated when the heat-pump module is installed and
connected to the tumble dryer.
Always ensure sufficient room ventilation (see installation instructions).
 Ensure that the heat-pump is connected to the tumble dryer correctly and without any
gaps. It should not be possible to gain access between the machines. This will otherwise
pose a danger of injury.
 This tumble dryer can only be used by people with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, if they are supervised whilst using it or
have been shown how to use it in a safe way by an authorised person.
 Children under 8 years of age must be kept away from the tumble dryer unless they are
constantly supervised.
 Children aged eight and older may only use the tumble dryer without supervision if they
have been shown how to use it in a safe manner. Children must be able to understand and
recognise the possible dangers caused by incorrect operation.
 Children must not be allowed to clean or maintain the tumble dryer unsupervised.
 Children should be supervised in the vicinity of the tumble dryer. Never allow children to
play with the tumble dryer.
 Always close the tumble dryer door after each drying cycle. This will prevent:
– Children climbing into the tumble dryer or hiding things in it.
– Pets or other small animals climbing into the tumble dryer.
 During the drying process, the door glass and the frame around the drum door will get
hot. Please be aware that the laundry may also be hot if it is removed from the tumble
dryer before the end of the drying programme.

en - Warning and Safety instructions
8
Safety measures in the event of leaking refrigerant
 The heat-pump coolant circuit contains a non-toxic, odourless refrigerant (R134a). If re-
leased into the atmosphere it is rapidly volatised. Because it is heavier than air, it can dis-
place oxygen and pose a danger of asphyxiation in small unventilated rooms.
 If any damage is found on the copper pipes on the heat-pump, stop using the machine
and vacate the room immediately.
– Warn other people present of the danger.
– Please see the safety data sheet for further information on how to handle this refriger-
ant.
– Call Service.
Preventing problems
 Empty all pockets to prevent the risk of flammable items such as lighters, matches,
candles and cosmetics getting into the tumble dryer.
 Always make sure that the tumble dryer drum is stationary before reaching in to remove
laundry. Do not touch a drum that is still rotating. Reaching into a moving drum poses a
significant danger of injury.
 Many drying programmes include a cooling phase for the laundry. These drying pro-
grammes are only finished once the cooling phase is complete. This ensures that the laun-
dry items do not remain at a high temperature and do not become damaged.
Only unload the tumble dryer once the drying programme has come to a complete finish.
Otherwise, a fire risk is posed by hot laundry self-igniting when it is stored or packaged.
 Never use the tumble dryer without the fluff filters in place. Otherwise there is a risk of
fire.
A damaged fluff filter must be replaced immediately. Otherwise, the air paths and heating
may become clogged with fluff. If this is the case, it is no longer possible to guarantee that
the tumble dryer will operate without issues.
Using accessories
 Only use genuine original Miele accessories and spare parts with this appliance. Using
accessories or spare parts from other manufacturers will invalidate the warranty and Miele
cannot accept liability.

en - Description of the machine
9
PT8257/8337WP
g
h
i
f
ab
c
d
e
aEmergency off switch
The emergency off switch should only be activated in the event of danger or in order to
prevent danger. When this switch is activated, the machine is immediately switched off
and put in a safe condition. Once the danger has been averted, the switch can be un-
locked again by turning the knurled washer to the right.
bFascia panel
cDrum door
The drum door is opened by pulling on the door handle.
dFluff filter compartment cover
The fluff filter compartment cover is opened by pulling on the handle.
eMachine feet (4 units)
To ensure that the tumble dryer is aligned horizontally and evenly, its height can be ad-
justed by turning the machine feet.
fElectrical connection
The permitted supply voltage is specified on the data plate of the tumble dryer.
gAir outlet vent
The hot air that is blown out from the heat exchanger to cool it warms the room air.
hAir intake vent
iCondensate drainage

en - Description of the machine
10
Controls
aDisplay
When the tumble dryer is switched on, the welcome screen will appear briefly followed
by the programme list. The most recently started programme is pre-selected (high-
lighted).
bFunction buttons
These buttons are allocated specific functions, which vary according to the machine
status. The current functions of these buttons are shown in the display via the buttons.
After the button is activated, the selected function remains highlighted in the display.
Alternatively, the function buttons can be reprogrammed to “Direct button assignment”.
In this case, the first 6programmes in the programme list can be selected directly using
buttons 1–6.
cbutton
The light ring around the button flashes when a selected programme can be started. The
selected programme starts when the start button is pressed. After a programme has
been started, the display content can be shown as before by pressing the start button
again.
dPC optical interface
Using PC software, data can be transmitted to and from the controls to a PC.
eSelector dial
The outer ring is used to select the display and input fields. Pressing the inner button al-
lows changes to be made to the display selection and input fields and also confirms
these changes.
fCard reader
If the machine is programmed for card operation, only drying programmes on the card
can be selected. The card must be inserted into the card reader in the direction of the
arrow.
gbutton
Switches the machine on.
hbutton
Switches the machine off.

en - Description of the machine
11
Function buttons
Stop/end
Pressing this function button stops the current programme or ends the currently stopped
programme.
Block plus
The corresponding programme block (e.g. Pre-drying) is added to the programme.
Functions
Another language can be temporarily selected by pressing this button.
Start time
If this button is pressed before the programme is started, the start time can be set individu-
ally for the programme.
Information
Programme information is shown in the display after this button is pressed.
Skip
Pressing this button allows the current programme to be skipped or a programme block to
be repeated.
Back to previous display
The previous display is shown by pressing this button.
Information on previous/next line
Some of the messages in the display are more than one line long. Touch the  or  arrow
button to read them in full.
Save
Any saved settings are accepted by pressing this button.
Programme locked
The current programme is locked by pressing this button. After 1minute, the locked pro-
gramme can no longer be stopped or cancelled by pressing the Stop/end button.
Programme unlocked
Pressing this button unlocks a locked programme.
Operating data
The operating data is displayed when this button is pressed.
Data transfer
Operator programme card
Initially, there are no programmes on this card. Please refer to the programming instruc-
tions for information on how data is transferred from the controls to the card.

en - Description of the machine
12
If a card with saved programmes is placed in the card reader before the programme is
started, the controls no longer access the internal programme memory. The content of
the card is read and displayed as a programme list with the reference “Card operation”.
The card can hold a maximum of 30programmes consisting of 6blocks each. The back of
the card can be labelled.

en - Drying
13
Not all fabrics are suitable for drying in a tumble dryer. Please observe the symbols on the
fabric care label.
Symbols on care labels:
– Dry at normal temperature
– Dry at low temperature
– Do not tumble dry
Tip: For even drying results and to avoid damaging fabrics, sort the laundry by fibre and
weave.
Only tumble dry items that have a care label stating that they are suitable for tumble
drying.
Tumble drying unsuitable fabrics poses a fire hazard.
The following fabrics must not be tumble dried:
– Fabrics which contain a large proportion of rubber, foam rubber or rubber-like materials.
– Fabrics treated with inflammable detergents.
– Items which have been splashed with hair lacquer, hair spray, nail varnish remover or
similar substances.
– Items soiled with oil, grease and similar residues, e.g. kitchen linen and linen used in
beauty clinics.
– Items such as mop heads and floor cloths containing residual wax or chemicals.
– Damaged items that contain fillings, e.g. pillows and jackets.
– Fabrics contaminated by greases and oils that have not been adequately washed. Use a
heavy-duty detergent for very heavily soiled items (e.g. workwear). Please seek advice
from the detergent manufacturer in this regard.
Drying woollen or linen fabrics
Woollen items and fabrics containing wool have a tendency to become matted.
Use the “Woollens” programme only to dry woollen items and fabrics containing wool.
Pure linen has a tendency to roughen if tumble dried.
Please follow the manufacturer's instructions.
Protect the drum from damage (scratches and dents).
Before placing items in the tumble dryer wrap any large metal parts such as buckles,
hooks, clasps and zips etc. with a cloth.
Items with closed metal zips can cause the moisture sensing electrodes in the drum ribs to
be bridged. This can lead to the drying process running on for too long or to not finish at
all.
Dry these items with the zip open.
Loopknit and woven textiles (e.g. t-shirts) have a tendency to shrink depending on quality.
This can be made worse by over-drying.
Do not use the “Cottons Extra Dry” programme for these items.

en - Drying
14
Starched laundry can be machine dried. Select the most appropriate programme for iron-
ing by hand.
Sort the laundry according to the level of dryness required.
It is not necessary to sort according to size.
Small items can find their way into duvet covers and pillow cases during the drying pro-
gramme.
Close or fasten duvet covers and pillow cases before drying them.
Underloading is uneconomical. Overloading will impair the drying result and the laundry
finish.
Dry using the maximum load for the programme whenever possible.
Rinse laundry in the washing machine using hot water in the final rinse.
This reduces the residual moisture level and maintains heat in the laundry which helps
keep processing time down, thus saving energy.
Before commissioning
Wipe the inside of the drum with a soft, dry cloth before loading the tumble dryer with
laundry.
Switching on the tumble dryer
Switch the machine on at the main switch (on site).
Press the button on the tumble dryer.
The welcome screen will be displayed.
M
PROFESSIONAL
PT 8xx7
Welcome
After the welcome screen, the programme list appears in the display. The most recently
started programme is pre-selected (highlighted).
1
2
3
0%
0%
20%



Cottons damp
Cottons extra dry
Cottons dry
Loading laundry into the tumble dryer
Open the drum door on the tumble dryer.
Unfold the pre-sorted laundry and place loosely into the drum.
The laundry must not contain any objects (e.g. dispenser containers).

en - Drying
15
Load capacities (dry weight)
PT 8257 WP PT 8337 WP
Drum volume
250l 325l
1, 2, 3, 4, 5 Cottons
10–13kg 13–16kg
6, 7, 8 Minimum iron
5kg 6.6kg
9 Woollens
4kg 5.2kg
10 Delicates
2kg 2.6kg
11, 12 Timed drying programme
10–13kg 13–16kg
13, 14 Proofing, Outerwear
5–6.6 6.6–9
Closing the drum door
Shut the drum door with a gentle swing.
Be careful not to trap any items in the door when closing it.
Fabrics could be damaged if they are trapped.
Selecting a programme
The tumble dryer is equipped with an electronic scanning system that constantly monitors
the moisture content of the laundry. As soon as the selected drying level is reached, the
laundry is cooled and the drying process is ended automatically. Different drying pro-
grammes can be selected for different types of fabric and depending on the further treat-
ment required.
1
2
3
0%
0%
20%



Cottons damp
Cottons extra dry
Cottons dry
Select the required drying programme by rotating the selector dial.
The selected drying programme remains highlighted.
Confirm the selected drying programme by pressing the inner button on the selector dial.

en - Drying
16
Selecting the additional “Block+” function
(Not for standard programmes)
2
0 %
10,0 / 13,0 kg
70


Cooling down
Cottons dry
Drying °C

Example display after programme confirmation
Press the function button to add the required programme block to the drying pro-
gramme (e.g. Pre-drying).
The field remains highlighted after the function button is pressed.
2
0 %
10,0 / 13,0 kg
70


Cooling down
Cottons dry
Drying °C

Example display with Block+ function selected
The function can be de-selected by pressing the function button again.
Starting a drying programme without making changes
If you do not want to make any further changes to the drying programme:
Press the button to start the drying programme.
The drying programme is now running.
Making changes to the drying programme before starting it
The following steps describe how to make changes to the parameters, such as load capa-
city, temperature or residual moisture, before the programme starts.
First press the selector dial to confirm the selected programme.
2
0 %
10,0 / 13,0 kg
70


Cooling down
Cottons dry
Drying °C

The maximum load capacity appears in the top right-hand side of the display. You now
have the option of making changes to the drying programme.

en - Drying
17
Changing the load capacity
Before the programme starts, you can enter the corresponding load manually by taking the
following steps:
Rotate the selector dial until the entry field for the load capacity is selected.
2
0 %
10,0
70


Cooling down
Cottons dry
Drying °C

13,0 kg
Press the selector dial to confirm the selection.
The load capacity can now be changed by rotating the selector dial.
Rotate the selector dial until the corresponding load has been set.
Press the selector dial again to confirm the set load.
You have now changed the load capacity.
Changing the temperature
Before the programme starts, you can individually set the temperature for the drying pro-
gramme by taking the following steps:
The temperature can be set in 1°C intervals from cold, 30–80°C.
Rotate the selector dial until the entry field for the temperature is selected.
2
0 % 70


Cooling down
Cottons dry
Drying °C
13,0 kg
Press the selector dial to confirm the selection.
The temperature can now be changed by rotating the selector dial.
Rotate the selector dial until the required temperature has been set.
Press the selector dial again to confirm the set temperature.
You have now changed the temperature for the drying programme.

en - Drying
18
Changing the residual moisture target
Before the programme starts, you can individually set the residual moisture target for the
fabrics by taking the following steps:
The residual moisture target can be set in 1% intervals from -4% to 40%.
Rotate the selector dial until the entry field for the residual moisture target is selected.
2
0 % 70


Cooling down
Cottons dry
Drying °C
13,0 kg
Press the selector dial to confirm the selection.
The residual moisture target can now be changed by rotating the selector dial.
Rotate the selector dial until the required residual moisture target has been set.
Press the selector dial again to confirm the set residual moisture target.
You have now changed the residual moisture target for fabrics.
Starting a drying programme
Once you have made all the required changes, you can start the modified drying pro-
gramme.
Press the button.
The drying programme is now running. The programme sequence is shown in the display.
2
0 % >40 %


Cooling down
Cottons dry
Drying


Finish at 12:35
Example of programme sequence display
In the second display line (Drying in the above example display), the current residual mois-
ture (>40%) and the symbol (=heating activated) are also displayed. The next pro-
gramme block is shown in the 3rd display line.
The time for the end of programme is shown to the right of the display (here: Finish
at12:35).
The end of programme display has an autonomous learning function. Several programme
sequences are therefore required for the exact time.
End of programme
2


Anti-crease
Cottons dry
Programme finished


Finish at 12:35

Example of end of programme display

en - Drying
19
The end of programme is indicated by a message in the display. At the same time, a
buzzer sounds for several seconds. The anti-crease phase is then started.
In the anti-crease phase, the drum will rotate at brief intervals to keep the laundry from
creasing.
Removing the laundry
The laundry may only be removed from the tumble dryer once the drying programme
has come to a complete finish (i.e. not before the end of the cooling phase).
Hot laundry can self-ignite and cause a fire when folded or put away.
Pull the door handle to open the drum door.
Remove the laundry.
Ensure that you do not leave any items of laundry in the drum.
Otherwise, these items of laundry could be damaged by overdrying when the tumble
dryer is next used.
Checking the fluff filter
The fluff filter must be checked for contamination after each drying process.
Pull the door handle to open the fluff filter compartment.
Check whether the fluff filter is dirty and clean it if necessary.
Close the fluff filter compartment again.
An opened fluff filter compartment poses a trip hazard.
2

Warning: lint filter blocked.
Cottons dry
Programme finished
Example display when fluff filter is dirty
The following message appears in the display when the fluff filter is dirty: Warning: lint filter
blocked.. In such a case, the fluff filter must be cleaned immediately after the end of pro-
gramme.
If the message is still displayed after the fluff filter has been cleaned, the heat exchangers
must be checked via the rear service panel and cleaned if necessary (see “Cleaning and
maintenance”).
Switching off the tumble dryer
Switch off the tumble dryer if no further drying programmes are to be run.
Close the drum door.
Press the button.
The tumble dryer is now switched off.
Then switch off at the main switch (on site).

en - Drying in programme card or coin operation mode
20
Programme card operation mode
Cards with one programme are intended for a particular model of machine. Blank cards
can be used in any machine.
Press the button to switch on the tumble dryer.
The welcome screen will appear in the display.
Only one suitable programme card may be inserted into the card reader. Do not use any
other objects.
Otherwise, the card reader can become damaged.
Inserting the programme card into the card reader
Insert the card into the card reader.
17
18
45
60



Minimum iron
Card operation
Fire service °C
°C
Example display: programme list in card operation
A list with the programmes on the card now appears in the display.
Selecting a programme
Select the required drying programme by rotating the selector dial.
The selected drying programme remains highlighted.
Confirm the selected drying programme by pressing the inner button on the selector dial.
Press the button to start the programme.
The selected drying programme is now running.
After the button has been pressed, the programme card can be removed from the card
reader. The programme will be deleted at the end of the programme.