Miele DG 6600 User manual

Installation Instructions
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
To prevent accidents
and appliance damage
read these instructions
before
installation or use.

,WARNING - Read all instructions
before installation or use of the
steam oven to prevent injury and
machine damage.
~Before installation, make sure that
the voltage and frequency on the
appliance's data plate correspond with
the household electrical supply.
These ratings must match to prevent
damaging the steam oven. If in doubt,
consult a qualified electrician.
~Installation, repair and maintenance
work should be performed by a Miele
authorized service technician. Work by
unqualified persons could be
dangerous and may void the warranty.
~Power bars or extension cords are
not safe (risk of fire). Do not use them to
connect the steam oven to the electrical
power supply.
~The electrical outlet should be easily
accessible after the appliance has
been installed.
~The appliance must be positioned
so that you can see the contents of a
cooking pan placed on the top level.
Otherwise you may risk scalding or
burning yourself with hot water and
food when taking pans out of the oven.
Note to the installer:
Please leave these instructions with the
consumer of the appliance for the local
building inspectors use.
SAVE THESE
INSTRUCTIONS
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS
96

Installation in a tall cabinet
* Appliances with glass front
** Appliances with metal front
aBuilt-in steam oven
bInstallation niche
cPower cord - Connection on the appliance
dRecommended location of the electrical outlet
ePower cord
Appliance and installation dimensions
97

Installation under a countertop
If the appliance is to be installed under a cooktop, observe the instructions for
installation of the cooktop as well as its installation height.
* Appliances with glass front
** Appliances with metal front
aBuilt-in steam oven
bInstallation niche
cPower cord - Connection on the appliance
dRecommended location of the electrical outlet
ePower cord
Appliance and installation dimensions
98

Installation in combination with an oven
* Appliances with glass front
** Appliances with metal front
aBuilt-in steam oven
bInstallation niche
cPower cord - Connection on the appliance
dRecommended location of the electrical outlet
ePower cord
fCut-out for ventilation when combined with a self-cleaning oven
gOven
Appliance and installation dimensions
99

Detailed dimensions of the steam oven front
* Appliances with glass front
** Appliances with metal front
Appliance and installation dimensions
100

^Push the appliance into the installation niche and align it.
The appliance must be level, so that the steam generator
can operate properly.
Deviation from the horizontal should not exceed 2°.
^Secure the appliance to the left and right side of the
cabinet with the two supplied 1/8" x 1" (3.5 x 25 mm) wood
screws.
Installing the appliance
101

,CAUTION: Before installation or
servicing, disconnect the power
supply by either removing the fuse,
shutting off the main power or
manually "tripping" the circuit
breaker.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous.
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the rating label correspond with the
household electrical supply. This
data must correspond to prevent
appliance damage.
Only operate the appliance after it
has been installed.
If there is any question concerning
the electrical connection of this
appliance to your power supply,
please consult a licensed electrician
or contact Miele’s Technical Service
Department.
Installer:
Please leave these instructions with
the consumer.
Power supply
Installation, repairs and other work
by unqualified persons could be
dangerous.
^Be sure your electrical supply
matches the data plate.
Power supply
This appliance is equipped witha5ft
(1.5 m) long power cord with a
three-prong grounding plug ready for
connection to a 240 V, 20 A, 60 Hz
power supply.
Further installation details are on the
wiring diagram.
Electrical connection
102

Disposal of packing material
The transport and protective packing
materials are environmentally friendly
for disposal and may be recyclable.
Ensure that any plastic wrap is
disposed of safely and kept out of the
reach of children. Danger of
suffocation! Danger of suffocation!
Disposal of an old appliance
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Before discarding an old appliance
ensure that it presents no danger to
children while being stored for
disposal. Unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
Caring for our environment
103

104