Miele H 2261 B User manual

Operating and Installation Instructions
Oven
To prevent accidents and machine damage, read these instructions
before installation or use.
en – CA M.-Nr. 09 786 730

Technical Service
71
After sales service
In the event of a fault which you cannot
easily correct yourself, please contact:
– your Miele dealer, or
– the Miele Technical Service
Department.
See back cover for contact details.
Please quote the model and serial
number of your appliance when
contacting Miele.
This information is given on the data
plate, visible on the front frame of the
oven, with the door fully open.
Warranty
For further information, please refer to
your warranty booklet.

Caring for the environment
72
Disposal of the packing
material
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Disposal of your old appliance
Do not dispose of this appliance with
your household waste.
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Before discarding an old appliance
ensure that it presents no danger to
children while being stored for disposal.
Unplug it from the outlet, cut off its
power cord and remove any doors to
prevent hazards.

Electrical connection
73
CAUTION:
Before servicing, disconnect the
power supply by either removing the
fuse, shutting off the power main or
manually "tripping" the circuit
breaker.
Installation, repair and maintenance
work must be performed by a Miele
authorized service technician. Work
by unqualified persons could be
dangerous and may void the
warranty.
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
Only operate the appliance after it
has been installed into cabinetry.
The plug must be plugged into an
appropriate outlet that is installed
and grounded in accordance with all
local codes and ordinances.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please leave these
instructions with the consumer.
Data plate
The silver data plate is located along
the front side of the oven with the door
open (see "Guide to the oven").
Before connecting the appliance
to the power supply, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
Electrical connection 208 V
Do not connect the oven to a
240 V power supply.
The oven is equipped with a 6' 3"
(1.9 m) long flexible power cord with a
NEMA 14-30 P plug, ready for
connection to a 120/208 V, 60 Hz, 20 A
power supply.
Maximum connected load: 3,600 W
Electrical connection 240 V
The oven is equipped with a 6' 3"
(1.9 m) long flexible power cord with a
NEMA 14-30 P plug, ready for
connection to a 120/240 V, 60 Hz, 20 A
power supply.
Maximum connected load: 3,800 W
SAVE THESE INSTRUCTIONS FOR
THE ELECTRICAL INSPECTOR'S
USE.

Installation diagrams
74
Appliance and cut-out dimensions
Undercounter installation
A
B
A
B
7/8" (23 mm)
21 9/16" (547 mm)
22 1/2"
(572 mm)
21 7/16" (544 mm)
23 7/16"
(595 mm)
23 7/16"
(596 mm)
22 1/16"
(560 mm)
4"
(100 mm)
23 5/8"
(600 mm)
21 5/8"
( 550 mm)
Cut-out for power cord with plug (min. 4" x 22" / 100 mm x 560 mm) in the
bottom of the cabinet
Power cord with plug

Installation diagrams
75
Installation into a tall cabinet
A
B
A
B
7/8" (23 mm)
21 9/16" (547 mm)
22 1/2"
(572 mm)
21 7/16" (544 mm)
23 7/16"
(595 mm)
23 7/16"
(596 mm)
22 1/16"
(560 mm)
4"
(100 mm)
590-595 mm
(23 1/4"-23 7/16")
21 5/8"
( 550 mm)
Cut-out for power cord with plug (min. 4" x 22" / 100 mm x 560 mm) in the
bottom of the cabinet
Power cord with plug

Installing the oven
76
The oven must not be operated
until it has been properly installed
within cabinetry.
In order for the oven to function
correctly, it required an adequate
supply of cool air. Ensure that the air
flow is not impaired (e.g. insulation in
the cabinetry). Also be sure that the
cool air supply is not heated by other
sources nearby.
Before installation
Before connecting the oven to the
power supply, first disconnect the
power supply from the oven isolator
switch.
Installing the oven
Connect the power cord to the
electrical supply.
Do not carry the oven by the door
handle. The door can be damaged.
Use the handles on each side of the
oven to carry it.
It is recommended that you remove
the door before installing the
appliance (see "Cleaning and Care -
Removing the door") and all oven
accessories from the cavity. This will
make for easier installation into the
niche and will not tempt you to use
the handle to carry it.
If there are side handles, please
remove them.
Push the oven into the cabinetry and
align it.
Open the door (if it was not removed
previously).
Use the supplied screws to secure
the oven to the side walls of the
cabinetry through the holes in the
trim.
Reinstall the door, if necessary (see
"Cleaning and care - Installing the
door").

77

M.-Nr. 09 786 730 / 00en – CA
H2261B
