Mightymast Leisure ASTRAL User manual

ASSEMBLY INSTRUCTIONS FOR THE 7FT ASTRAL
OUTDOOR POOL TABLE
Please keep these instructions for future reference. Two adults are required for assembly.
1. Carefully unpack the table & check that the parts & accessories are included & all in order. We recommend
building the table on the box top to protect the parts during assembly.
2. Save all packing materials until all parts have been inspected & the table is assembled.
Parts Identifier

Assembly
1. Attach the 4x legs #P2 to the underside with the bolts & washers #H1 & #H3.
2. Attach the leg end panels #P3 to the insides of the legs #P2 with the bolts & washers #H2 & #H4.
3. Screw the leg levellers #P4 into the bottom of each leg #P2.

4. Very carefully turn the table over & set it on its legs – be careful as the table is very heavy. This step requires
two or more adults. Do not use the legs for leverage.
5. If required level the table by turning the leg levellers #P4. Start by adjusting the lowest corner first & then
work around the table.
6. When the table is not in use place the tent frame #A8 onto the playfield surface and pull over the cover #A7
in order to protect the table.
7. Place the tent frame #A8 underneath the table when not in use.

Care & Use of your Table
1. Use spray furniture polish to clean all exterior surfaces.
2. Use the table brush provided to clean the cloth on the table.
3. This product is intended for both indoor & outdoor use.
4. DO NOT sit, climb or lean on the table.
5. DO NOT drag the table when moving it as this will damage the legs. The table must be lifted.
6. The table must be protected with the cover provided when not in use in order to maximise the life of the
cloth.
For sales & service please contact:
Mightymast Leisure Ltd
58 Bentwaters Park
Rendlesham, Woodbridge
Suffolk. IP12 2TW
UK
Tel: [phone]
Fax: [phone]
www.mightymast.com
[email protected]