MIKA MDSI568 User manual

DRY / SPRAY IRON
MODEL No: MDSI568
THANK YOU & CONGRATULATIONS FOR PURCHASING THIS QUALITYPRODUCT
To get the optimum use & derive maximum satisfaction from this product, we request
you to read and follow all the instructions in thisuser manual carefully before using the
product. Keep this user manual in a proper place where you can find it for future
reference.
USER MANUAL

GENERAL DESCRIPTION........………………………………………..………......................................
SAFETY CAUTIONS.…………………………………………………………………...............................
BEFORE USE………………………………………………………...…………………............................
HOW TO OPERATE………………………………………………………………....................................
CARE, MAINTENANCE........................…………………………………….......…...............................
STORAGE....................………………………………………………………….…………………….........
TROUBLE SHOOT....................………………………………………………………….…………………
AFTER SALES SERVICE / CUSTOMER CARE.…………..……….………........................................
DISPOSAL..........................................................................................................................................
CONTENTS
1
2
3
4
5
6
7
8
9
1. Spray nozzle
2. Water tank
3. Spray button
4. Water tank release button
5. Temperature control knob
6. Soft touch handle
7. indicator light
8. Ceramic soleplate
GENERAL DESCRIPTION
1 2 3 4 5 6
7
8

SAFETY CAUTIONS
1. After unpacking, make sure to assemble the parts of the appliance correctly.
2. Wipe the outer part of the appliance with a wet cloth.
BEFORE USE
NOTE: The manufacturer shall not be held responsible for any injury to persons or damages to
property caused by incorrect installation or use of this appliance.
When using electrical appliances, basic safety precautions should always be followed, including the
following;
1. All safety and operating instructions should be read before operation and user manual should be
retained for future reference.
2. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental incapability, and lack of experience and knowledge of the product, unless they
are under close supervision or instruction concerning use of the appliance by a person respon-
sible for their safety and who has full knowledge of the product.
3. Use the appliance only for its intended use. This appliance is for household use only. Do not use
outdoors.
4. Do not operate any appliance with a damaged power cord or plug, or after the appliance malfunc-
tions or is dropped or damaged in any manner.
5. Only connect the appliance to an earthed power socket.
6. The use of accessory attachments is not recommended by the appliance manufacturer as it may
cause electrocution and / or damage the appliance.
7. Do not operate this appliance with an external timer.
8. Always place the appliance on a stable surface and then plug into the electrical socket.
9. Do not allow the power cord to hang over the edge of surfaces. Place the power cord in a safe
manner to avoid tripping and falling.
10. Do not allow the power cord or plug to come in contact with water as it can cause an electric
shock or damage the appliance.
11. Do not place the appliance near any flammable materials and very close to electrical sockets.
12. Do not touch hot surfaces. Use handles or knobs. Care must be taken to prevent burns which can
occur from touching hot parts.
13. Always place the iron in an upright possition , then plug the cord into the electric socket.
14. Move the dial to the MIN position before unplugging from electric socket.
15. Be careful not to overfill the appliance, for safety purposes.
16. Place cables in a safe manner to avoid Slips, trips and falls.
17. Do not remove or lift the appliance while the power cord is connected to the power socket.
18. Make sure the appliance is in OFF position before plugging to or unplugging from an electric
socket.
19. Remove the plug from the power socket when the appliance is not in use.
20. Do not attempt to dismantle the product. Unauthorized handling/repairing of the device may
result in an electrical shock or damage to the device and will void your warranty.

Before Use
To avoid overloads, do not plug any other high-power appliance into the same electricity line.
Suggestions Before Using The Iron: -
1. Certain parts of the iron have been lightly greased therefore the iron may produce a little smoke
when plugged in. This should stop after a short while.
2. When using the iron for the first time, remove the plastic protector from the base (if it has one)
clean the base with a soft cloth.
3. Keep the base very smooth. Do not run it over metal objects (such as against the ironing board,
buttons, zips, etc).
Fill The Water Tank
1. Remove the water tank by pressing the water tank release button
to remove the cover (Figure 1).
2. Fill the water tank with water.
3. Place back the water tank.
Selecting The Temperature
1. Check the ironing instructions on the garment to be ironed.
2. Fabrics that have some kind of finish (polishing, wrinkles, contrasts...) can be ironed at the lowest
temperatures.
3. If the fabric contains several kinds of fibres, always select the temperature applicable, if an article
contains 60% polyester and 40% cotton, you must always choose the temperature corresponding to
polyester.
4. First classify the fabrics to be ironed according to the most suitable ironing temperature: wool with
wool, cotton with cotton etc. as the iron heats up as fast as it cools, start by ironing the fabrics
requiring the lowest temperature such as those made of synthetic fibres. Progress towards those
that require the highest temperatures.
5. Turn the temperature control until it corresponds with the appropriate signal according to the
following: See (Figure 2)
• Position for nylon and acetate.
• Position for wool, silk or mixures.
• Position for cotton or linen.
Ironing
1. Plug the iron into an earthed electric socket.
2. Wait until the pilot light goes out, which indicates that the selected temperature has been reached.
3. Turn the steam button to the required position.
4. When the ironing is finished and during breaks in ironing, place the iron in its upright position.
5. Disconnect the iron from the mains supply. Leave the iron to cool off.
HOW TO OPERATE

If you find something wrong with this appliance even after the trouble shooting, contact the nearest
agent of MIKA products or contact the customer care center. The customer care contacts are
provided on the warranty card and our website www.mikaappliances.com.
DISPOSAL
Environmental Protection
This appliance should not be disposed off with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice.
AFTER SALES SERVICE / CUSTOMER CARE
CARE & MAINTENANCE
• Ensure that the appliance is unplugged before cleaning.
• Let the Product completely cool down before cleaning.
• Do not use abrasive ,detergents, any organic solvents or aggressive chemicals.
TROUBLE SHOOTING
Problem Possible Cause Solution
STORAGE
• Switch off and unplug the appliance; let it completely cool.
• Complete all the requirements of chapter CARE & MAINTENANCE.
• Reel on the power cord.
• Keep the appliance in a dry cool place.
The IRON does
not work
The appliance is not
plugged in.
The iron plug may not be put
into the power socket correctly.
Put the main plug in an
earthed
wall socket.
Firmly fix the iron plug
into the power socket
Spray
1. The spray can be used at any time, either in dry or steam ironing, as long as the water tank is
filled with water.
2. Press the spray button for this function.
NOTE : This button has to be pressed repetitively to start this function for the first time.