Milano Horizontal Windsor Radiator User manual

Horizontal Windsor Radiator
Contents
Product Information Page‑2
General Information Page - 2
Installation
Valve installation advice Page 3
Parts Included Page 3
InstallationPage‑4
Floor mounting kit Page - 5
Aftercare Page‑5
Your Guarantee Page‑5
Recycling and Disposal Page - 5
Contact us - Page - 5

Product Information
•This product can only be used up to PN 1MPa (10g/cm², 10 Bar). It should only be filled with water correctly dosed with
an inhibitor, and at a temperature below 100 °C (212°F).
• If the temperature exceeds 48 ºC (or 120 ºF), please show a warning sign on the product to avoid burning and scolding
accidents.
•This Product is only suitable for use on indirect or sealed central heating systems including combination boilers.
To ensure that our products provide you with the service that we expect, it is important that they are installed in
accordance with the British Standard Code of Practice for Central Heating for Domestic Premises BS 5449 Part 1
and the British Standard Code of Practice for the Treatment of Water in Domestic Hot Water Central Heating
Systems, BS7593.
To ensure you can enjoy your radiator for as long as possible, it is essential you first FLUSH YOUR HEATING SYSTEM WITH
A CENTRAL HEATING CLEANSER, this will clear any waste from the system. Following the cleansing of the system you must
PROTECTTHESYSTEMWITHACENTRALHEATINGINHIBITOR. These two simple steps will greatly increase the efficiency
and lifespan of your central heating system. Failure to complete these steps increases the chance of pinhole leaks, and may
also invalidate the guarantee on your radiator.
General Information
2
Do not throw away packaging until you have located and confirmed that you have all included parts.
This radiator must be installed by a qualified plumber or other fully competant person.
For your own protection we recommend that you wear safety boots and gloves.
Inspect the finish on the product for signs of damage before installation.
The provided fixings are for solid brick walls only, if installing on any other surface please check that it will safely support
the product and purchase suitable fixings.
Please read carefully...
2

Valve installation advice :
Please ensure that your radiator valves are fitted as per the below diagrams ensuring that a bleed point always remains at the top
of the unit.
= Bleed Valve
For further information on installing your radiator valves, please consult the instructions provided with them.
Installation
Parts Included:
10mm
Tools required for installing:
3

2B
1
A
34
7
56
8
4

Windsor floor mounting kit*
*If unsure, please contact us to confirm the size required for your radiator.
TRUSHFEE2 - 2 Column Radiators
TRUSHFEE3 - 3 Column Radiators
TRUSHFEE4 - 4 Column Radiators
5
Aftercare
Clean any marks with a soft dry cloth, for stubborn stains please clean with mild soapy water and buff out with a soft cloth.
DO NOT use abrasive or acidic cleaners, if you are unsure, please contact us first.
Your Guarantee
• This product is covered by a 20 year guarantee.
• The guarantee starts from the date of purchase.
• The guarantee covers you against issues caused as a result of manufacturing related issues, it does not apply to issues that
are found to be a result of poor installation.
• Labour costs for installation of the product are not covered and the guarantee does not cover you for
consequential loss.
Recycling and Disposal
Please recycle the packaging in accordance with your local government regulations on waste handling, and follow the same
advice at the end of the products life.
Product - Steel.
Packaging - Cardboard, plastic, steel.
Contact us
LDG
Unit 1&2
Burnley
BB11 5UB