Miller AG-BAG G6060 User manual

MILLER-ST.NAZIANZ,INC.
P.O. BOX 127
ST. NAZIANZ, WI 54232
920/773-2121
FAX:[phone]
OPERATOR'S MANUAL
DO NOT OPERATE THIS EQUIPMENT UNTIL THIS
MANUAL HAS BEEN READ AND UNDERSTOOD.
Part Number: 42.0900893F
February 2013
MODELS: G6060, G6070

SOME PHOTOGRAPHS USED HEREIN MAY SHOW DOORS, GUARDS AND
SHIELDS OPENED OR REMOVED. BE SURE THAT ALL DOORS, GUARDS
AND SHIELDS ARE FASTENED IN THEIR PROPER POSITION BEFORE
MACHINE IS OPERATED!
WARNING
INTRODUCTION
This Operator's Manual is provided to acquaint the operator with the safety and operation of the Miller Ag-
Bag G6060 and G6070 bagger. Complete Assembly, Operation, Lubrication and Maintenance procedures
are provided. Following the recommended procedures will help you achieve many years of dependable
service.
This manual is considered part of your machine and should remain with the machine at all times.
Make sure the operator reads and understands the manual before placing the bagger into operation.
Failure to follow the recommended procedures may result in injury and equipment damage, and could
void the warranty.
MACHINE SERIAL NUMBER
The machine serial number is located on the rear frame next to the bag boom tube For your convenience
refer to this number and your product model number when requiring service or parts information. Record
the machine serial number, model number, date of purchase and dealership name in the space provided
below.
Date Purchased
Model No. Serial No.
Right and Left Hand sides are determined from a position standing at the rear (tunnel side) of the unit
looking toward the hitch when in the operating position.
This Operator's Manual uses the term "Tractors" when identifying the power source for the bagger.
The Warranty Registration must be completed by the dealer online to validate your warranty protection.
You must read and understand the places where you attest to having received instructions as to care,
adjustments, safe operation and applicable warranty policy. The terms and conditions of the warranty are
specified on the rear cover of this manual.
Dealership

1
Table Of Contents
AG-BAGGER CHECK LISTS ............................................................................................................. 4
SAFETY PRECAUTIONS................................................................................................................... 5
Power Source Shutdown Procedure............................................................................................. 5
SAFETY DECALS .............................................................................................................................. 8
Reflective Decals ........................................................................................................................ 12
AG-BAGGER COMPONENT LOCATIONS ...................................................................................... 13
SET-UP AND ASSEMBLY ................................................................................................................ 14
Assemble Bag Boom .................................................................................................................. 14
Assemble Tunnel Extension........................................................................................................ 14
Assemble Bag Pan ..................................................................................................................... 15
Prepare the Backstop ................................................................................................................. 16
OPERATION..................................................................................................................................... 18
Pre-Operation Checklist.............................................................................................................. 18
Set The Backstop In Position...................................................................................................... 19
Changing Wheels and Hitch To Bagging Position....................................................................... 21
Hook Tractor To Tow Hitch........................................................................................................... 24
Assemble PTO Shaft To Bagger and Tractor .............................................................................. 24
Connect Hydraulic Lines (Units without hydraulic package) ....................................................... 26
Connect The Inoculant Applicator (Units so equipped) .............................................................. 26
Bag Identification ........................................................................................................................ 27
Bag Installation ........................................................................................................................... 28
Seal The Beginning End Of The Bag.......................................................................................... 31
Attaching The Backstop.............................................................................................................. 32
Lower Conveyor to Operating Position........................................................................................ 33
Bagging Operation...................................................................................................................... 35
Remove Bagger From Bag ......................................................................................................... 37
Venting The Bag ......................................................................................................................... 38
Changing Bagger To Transport Position...................................................................................... 39
AG-BAGGING INSTRUCTIONS....................................................................................................... 46
Bag Information .......................................................................................................................... 49
ADJUSTMENTS............................................................................................................................... 52
Conveyor Chain - Single Chain Conveyor .................................................................................. 52
Conveyor Chain - Split Conveyor................................................................................................ 53
Conveyor Drive Chain (Split Conveyor Only).............................................................................. 55
Hydraulic Pump Drive Chain (Self Contained Hydraulics Only) ................................................. 56
Rotor Drive Chain ....................................................................................................................... 57
Continued On Next Page

2
LUBRICATION AND MAINTENANCE .............................................................................................. 58
Tire Air Pressure......................................................................................................................... 58
Wheel Lug Nut Torque ................................................................................................................ 58
Rotor Bearings............................................................................................................................ 58
Cable Drum Shaft Bearings........................................................................................................ 59
Upper Conveyor Apron Shaft Bearings (Split Conveyor) ............................................................ 59
Upper Conveyor Apron Shaft Bearings (Single Conveyor) ......................................................... 60
Center Conveyor Apron Shaft Bearings (Split Conveyor) ........................................................... 60
Lower Conveyor Apron Shaft Bearings....................................................................................... 61
Lower Conveyor Clean Out......................................................................................................... 61
PTO Shaft ................................................................................................................................... 62
Bag Boom Pivot .......................................................................................................................... 62
Wheel Bearings .......................................................................................................................... 63
Rotor Drive Chain ....................................................................................................................... 64
Hydraulic Pump Drive Chain (Self Contained Hydraulics Only) ................................................. 64
Conveyor Drive Chain (Split Conveyor Only).............................................................................. 65
Hydraulic Oil (Self Contained Hydraulics Only) .......................................................................... 66
Hydraulic Oil Filter (Self Contained Hydraulics Only) ................................................................. 69
Gearbox Oil................................................................................................................................. 69
Cable Drum Brake Pads ............................................................................................................. 71
Rotor Tooth Tine Caps ................................................................................................................ 72
Cables......................................................................................................................................... 73
Shear Bolts ................................................................................................................................. 73
Hydraulic Hand Pump................................................................................................................. 74
TROUBLESHOOTING...................................................................................................................... 75
TROUBLESHOOTING (CONTINUED)............................................................................................. 76
STORAGE ........................................................................................................................................ 77
TORQUE SPECIFICATIONS............................................................................................................ 78
Tightening Hydraulic Fittings ...................................................................................................... 79
MACHINE SPECIFICATIONS........................................................................................................... 80
LUBRICATION SPECIFICATIONS ................................................................................................... 81
MACHINE WARRANTY.................................................................................... INSIDE BACK COVER
Table of Contents - continued

3
This Page Intentionally Left Blank