Milwaukee M12 PAL User manual

WARNING
READ AND UNDERSTAND ALL IN-
STRUCTIONS. When using electric
appliances, basic precuautions should always be
followed, including the following:
Before using the flood light, read this operator's
manual, your battery pack and charger operator's
manual, and all labels on the battery pack, charger
•
•
•Read and understand all the instructions before
using the appliance.
•To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
•Do not use outdoors.
•For a rechargeable appliance - Use only the charger
supplied by the manufacturer to recharge.
•
•
•
SPECIFICATIONS
Cat. No. .................................................... M12 PAL
Volts.............................................................. 12V DC
Battery Type ....................................................M12™
Charger Type...................................................M12™
USB Ouput ..................................................... 5V DC
USB Amps .......................................................... 2.1A
Recommended Ambient
Operating Temperature...................... -17°C to 51°C
Batteries must be recharged only with the charger
A charger that may
be suitable for one type of battery may create a risk
battery pack. Use of any other batteries may create
When battery pack is not in use, keep it away from
metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make
a connection from one terminal to another. Short-
ing the battery terminals together may cause sparks,
SAVE THESE INSTRUCTIONS
LIGHT
WARNING
CAUTION
To reduce the risk of injury, do not
Inserting/Removing Battery Pack
Insert the battery pack by sliding battery pack into
the body of the tool. Insert the battery pack until the
battery latches lock.
To remove the battery pack, press in both battery
Power
stare at the operating light source.
Press the power button to cycle through HIGH,
LOW, and OFF settings.
USB Port
To charge a phone or other electronic device using the
2.1A USB port, plug in the USB and press the USB
wake button. The port will remain ON for about 2 hours.
M12™ PIVOTING
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE®service facility for a
replacement.
Cat. no.: M12 PAL
ADDITIONAL BATTERY
SAFETY RULES
WARNING
WARNING
To reduce the risk of fire, personal
injury, and product damage due to
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater , certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
Do not charge non-rechargeable
batteries.
SYMBOLOGY
Volts
Direct
Current
Amps
Class III appliance
Read
Operator's
Manual
Regulatory
Compliance mark
(RCM). This product
meets applicable
regulatory
requirements.
Indoor use
Do not dispose of
electric tools
together with
household waste
material. Electric
tools and electronic
equipment that
have reached the
end of their life
must be collected
separately and
returned to an
environmentally
compatible
recycling facility.
Do not stare
at the
operating
light source.
AREA LIGHT
IMPORTANT SAFETY
INSTRUCTIONS
Recharge only with the charger
specified for the battery. For
specific charging instructions, read the
operator’s manual supplied with your charger
and battery.
1
Know your flood light. Read this manual carefully
to learn your flood light's applications and limitations
as well as potential hazards associated with this type
of tool.
Store idle flood light out of reach of children.
Warm flood lights can become hazardous in the
hands of children.
•
V
A

WARNING
MAINTENANCE
WARNING
Maintain Light
Cleaning
To reduce the risk of injury,
alwaysunplug the charger and
remove the battery pack from the charger or tool
before performing any maintenance. Never
disassemble the tool, battery pack or charger.
Contact a MILWAUKEE®service facility for ALL
repairs.
Keep your light, battery pack and charger in good
repair by adopting a regular maintenance program. If
the light does not work properly, return the light to a
MILWAUKEE®service facility for repairs.
Keep tool handles clean, dry and free of oil or grease.
Use only mild soap and a damp cloth to clean the tool,
battery pack and charger since certain cleaning
agents and solvents are harmful to plastics and other
insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household
detergents containing ammonia. Never use
flammable or combustible solvents around tools.
To reduce the risk of personal
injury and damage, never immerse
your tool, battery pack or charger in liquid or
allow a liquid to flow inside them.
Milwaukee Electric Tool Corporation
13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005
Milwaukee Tool (Australia)
Melbourne, Australia
21 Kelletts Road, Rowville, VIC 3178
Milwaukee Tool (New Zealand)
274 Church Street, Penrose,
Auckland, 1061, New Zealand
DESIGNED BY MILWAUKEE ELECTRIC TOOL CORP.
PROFESSIONALLY MADE IN CHINA
PRINTED IN CHINA
WARRANTY - AUSTRALIA and NEW ZEALAND
SERVICE - AUSTRALIA and NEW ZEALAND
Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to
product sold by authorised dealers in Australia and New Zealand.
MILWAUKEE®prides itself in producing a premium quality product that is Nothing But Heavy DutyTM.
Your satisfaction with our products is very important to us! If you encounter any problems with the
operation of this tool, please contact your authorised MILWAUKEE®dealer.
For a list of MILWAUKEE®dealers, guarantee or service agents please contact MILWAUKEE®
Customer Service or visit our website.
(Australia Toll Free Telephone Number 1300 645 928)
(New Zealand Toll Free Telephone Number 0800 645 928)
or visit milwaukeetool.com.au/milwaukeetool.co.nz.
2
01614600301Q-01A