Mimio Xi User manual

Use this guide to quickly setup and use your mimio Xi
interactively with a projector.
For Mac OS X 10.3.9 or later
Interactive Whiteboard
Setup Guide for


1

1
1Check your contents
Your mimio Xi contains the following components:



2
mimioStudioCDmimioXi(CaptureBar)MountingBrackets
mimioMouseInsert
x4mimioSt
y
liandCa
p
sx4ExpoMarkers
(NotusedinInteractiveMode)
mimioEraser
(NotusedinInteractiveMode)

EraserHolder
(NotusedinInteractiveMode)

x1AAABattery,
x4N‐CellBatteries,and
x4AABatteries
USBCable


3
2
2Install mimio Studio
1. Insert the mimio Studio CD into your CD ROM drive.
2. When the CD's icon appears on the desktop, double-click the
icon to display the CD's contents.
3. Double-click the mimio Studio icon. An installation application
will launch.
4. Follow the onscreen instructions.

4
3
3Setup your mimio Xi
1. Unfold the mimio Xi.
2. Plug the included mini-USB cable into the socket on the bottom
recessed end of the mimio Xi.

3. Attach the mimio Xi to your whiteboard, using one of the
following:
•For periods of extended use or repeated use in any location,
attach the mimio Xi using the mounting brackets:
a. Snap the mounting brackets over the suction cups,
making sure they clip into the recesses on the edges of
the mimio Xi.
b. Carefully peel the backing from the adhesive strips.
c. Mount the mimio Xi by pressing the bar, with mounting
bracket in place, in the upper left-hand corner of your
whiteboard.
•For short periods of use, attach the mimio Xi using the
suction cups.
5

a. Clean the surface of the whiteboard with a damp cloth.
b. Press the mimio Xi in the upper left-hand corner of your
whiteboard.
4. Plug the other end of the USB cable into your computer USB
port. The capture bar should be automatically detected by the
computer and the mimio Studio software. Refer to your system
documentation if you are unable to find the USB port, or if your
capture bar is not automatically detected.
6

7
4
4Setup your pen
1. Remove the end of the
stylus by twisting and
pulling.
2. Remove the colored cap
by pressing on the
colored nodes and pulling.
3. Insert N-Cell battery.
4. Put the colored cap back
on by snapping it into
place.
5. Insert the mimioMouse
into the stylus.
6. Put the stylus back
together by pushing and
twisting.

8
5
5Calibrate with a projector
1. Project your Desktop image onto your whiteboard. Make sure
there is a 2-3” buffer between the projected image and:
•The edges of the whiteboard
•The mimio device
2. Press the Interactive button on your mimio device.
3. Follow the onscreen instructions.

9
6
6Available Accessories
Visit the mimio Store at http://www.mimio.com/store (for USA
customers) or contact your local reseller to purchase add-ons and
accessories.
mimio wireless
mimio Wireless is an upgrade available for mimio Xi. With
mimio wireless you no longer need to worry about tripping
over cables or whether the USB cable is long enough to
reach your computer.
mimio Xi Carry Case
Get to that next meeting in style! Use this attractive carry
case to move your mimio Xi - it holds the capture bar
(folded), eraser, styli, cable, and software in a sturdy shell
embroidered with the mimio logo.




10

Virtual Ink Corporation
150 CambridgePark Drive
Cambridge, MA 02140
USA
Toll-free in US: (877) my-mimio (696-4646)
E-mail: [email protected]
Support telephone: [phone]
Support E-mail: [e-mail]
Virtual Ink Europe Ltd
7 Berkshire Business Centre
Berkshire Drive
Thatcham, Berkshire
RG19 4EW
UK
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
Support Telephone: [phone]
Support E-mail: [e-mail]
Mac is aregistered trademark of Apple Computer, Inc. All rights reserved.
© 2006 Virtual Ink Corporation. All rights reserved.
mimio is a registered trademark and mimio Xi is a trademark of Virtual Ink Corporation.