Mimosa 3M SQUARE 3191028 User manual

5-1
3M SQUARE CANTILEVER UMBRELLA
Assembly Instructions
Item No. 3191028
Warning:
When assembling and using this product, safety precautions
should always be followed to reduce the risk of personal injury
and damage to equipment. Please read all instructions before assembly and use.
Some parts may contain sharp edges, wear protective gloves if necessary.
At least two or more people are recommended for safe assembly.
Keep all children and pets away from assembly area.
Install on level ground.
Check all nuts and bolts for tightness before and during usage.
The cross base must be weighed down with concrete pavers to secure the umbrella.
Non Permanent structure. Do not use in extreme weather conditions including
heavy rain or high winds.
Attention:

PARTS AND HARDWARE LIST
Allen Key
Umbrella Cover
5-2
Screw with plastic cap
crank
Umbrella frame & Canopy
Plastic Cone
Screw Washer
Stay Pole
Umbrella Base
360°Swivel System
Metal Cross Base
Metal Cross Base
CODE CODE PARTS PARTSQTY QTY
UP
DOWN
(M10)
E
D
J
KL
I
C
B
A 1
1
1
1
1
8
1
1
1
1
1
1H
G
F
3M SQUARE CANTILEVER UMBRELLA
Assembly Instructions

5-3
Fix the 360°swivel system(C) with the metal cross base(A+B). Then fix the umbrella
base(D) with 360°swivel system(C) by screw(E).
Place the plastic cone (F) onto umbrella base (D).
1
2
3
snoitcurtsniylbmessA
Place the umbrella frame & canopy (G) onto the umbrella base pole (D). Fix screw with
plastic cap (I) on umbrella base (D) & connect two tubes.

5-4
Your umbrella is fully assembled and ready for use.
Open the umbrella by rotating the crank. To adjust the angle of the umbrella, slide the handle
down the pole.
The umbrella can be rotated 360° by stepping
on the foot lever on the base
Assembly instructions
Squeeze the handle and push it in
the upwards direction towards the
top of the umbrella pole until it locks
into place.
1
2 3
4 5

5-5
Assembly instructions
Ｋ
Ｌ