Mimosa 3191785 User manual

A
B
C
D
E
F
H
G
I
CODE PARTS QTY. CODE PARTS QTY.
PARTS LIST HARDWARE LIST
1PC
1PC
1PC
1PC
1PC
1PC
Frame & Canopy
Screw & Washer
Allen Key
Plastic Base
Housing Cover
Square Tube
Rotary Knob
Stay Pole
Umbrella Cover
1PC
1PC
10-1
4PCS
Please carefully read the below warnings and instructions. Save the
instructions for future reference.
!
1.Please carefully read all instructions before assembly and use
2.Please separate and identify all parts, ensuring that you have all parts listed
3.To avoid damaging your umbrella, it is recommended that you assemble it on a clean, protected surface
4.Washers must be used when indicated during the assembly process
5.Loosely tighten the nuts and then securely tighten when all are in position. Be careful not to over tighten the
nuts during assembly.
3.5M ANDAMAN CANTILEVER UMBRELLA
Assembly Instructions
Item No. 3191785
Crank
J1PC

10-2
1 2
3 4
A
E
C
B
DH
Assembling Instruction
ATTENTION: The base
needs to be secured with
water or sand to help keep the
umbrella stable.
Fix the square tube (D) with
the plastic base (B) using
screw & washer (H).
Fill the base with water or
sand to make it stable.
Place the frame & canopy （A） onto
the umbrella base pole, using rotary
knob (E) to fix.
Place the plastic circle（C）
onto umbrella base pole.

5
6
10-3
1-1
1-3
1-2
Operating Instruction
Squeeze the handle and push it
in the upwards direction
towards the top of the umbrella
pole until it locks into place.
Open the umbrella by rotating
the crank clockwise. Vertically
adjust height as required.
HOW TO OPEN AND
ADJUST THE UMBRELLA
J

7
8
10-4
2-1
2-2
2-3
1
1
2
2
Operating Instruction
Click to tilt umbrella angle as
you like （approx 90 degree of
each side）.

9
10
10-5
1-1
1-2
1
2
3 54
Operating Instruction
Remove the crank handle from
the pole and insert into the
base winding mechanism.
Unwind the handle and cord
Open the handle cover
to expose the pulling
handle and winding
mechanism
HOW TO RELOCATE YOUR UMBRELLA

11
12
10-6
Operating Instruction
Now that the handle and
wheels are fully extended,
the umbrella base can be
easily pulled to your new
location
Do not attempt to pull your umbrella up a
steep slope or grassed surface.

13
10-7
1-2
1-1
12
34
56
Operating Instruction
Once the umbrella base is in the
desired location, wind up the cord
and handle and store in base. Retract
the wheels by winding the handle in
an anti-clockwise direction.
Remove the handle and
replace in its original
position in the upright
pole. Close the
housing cover.

14
15
10-8
1-1
1-2
Operating Instruction
Close the umbrella frame by
rotating the handle
counter-clockwise.
Close the total frame & canopy by moving the crank
downwards to the lowest position hole.
HOW TO CLOSE THE
UMBRELLA

16
17
10-9
G
G
F
L
2
1
F
Operating Instruction
Assemble the stay pole （F）.
Lift the umbrella cover (G) to the top of the umbrella using the stay pole (F).
Pull the umbrella cover (G) down over the umbrella with your hands.

18
19
10-10
CARE AND CLEANING:
1. To clean, wipe with damp cloth. Do not use bleach, acid solvents or abrasive cleaners.
2. During winter or periods of heavy rain and wind, it is strongly recommended that the umbrella be stored in its cover,
in a dry protected area.
Operating Instruction
Once it has fully covered
the umbrella,pull the zip
closed and put the stay
pole in the protective
bag.
ATTENTION: DO NOT use in extreme
weather conditions including high wind
and heavy rain.