Minoston MP23W User manual

Dimmer
Outlet
Always-On
Outlet
Wi-Fi Outdoor Plug
( 2 Outlets )
Specifications
+
Meet your new smart Plug !
(A) Manual / Program button
This is your smart outlets that will be
included in your smart home.
(B) Smart Outlet * 2
Single press: manually turn on/off your
device simultaneously.
Hold 5s: initiate App-configured Mode
Note:
Your device may need to be within 100 feet of the controller to be
included. If so, include the device to the network within 10 feet of
the controller and relocate it to the desired position in your home.
Be sure to refresh the network if the device is included in this
manner.
Power: 120V AC, 60Hz
Total(Both Outlets):15 Amp Max
Wireless Frequency: 2.4GHz
Wireless Standard: IEEE802.11b/g/n
Operating Temp of -4° F~122° F
Please vertical hang on the wall.
A
B
C
100 feet
Introduction
The Minoston MP23W is an enabled 15A outdoor smart plug
designed for use for most residential lighting and motor applica-
tions. It's compatible with LED, halogen, incandescent, xenon,
fluorescent and compact fluorescent bulbs. Works with Amoazon
Alexa, Google Assistant.
One smart outlet, you can use free App, or voice control by Alexa
and Google Assistant to operate your devices in your home.
• MP23W •
For outdoor use
IP65 Rated
Note: Do not plug an extension cord in this smart plug.
The plug is designed to be angled 45 degrees,
allowing you to make the most of your home wall
outlet.
Use our screws and anchor to lock it in
the wall.(optional)
When the white LED is flash slowly (AP mode),
please hold the button 5 seconds until the LED
change to blinks rapidly--Back to EASY MODE.
Note:
Your device needs to be installed in the network coverage of your home router.
1. Please scan the QR code to download the application “Smart Life”.
2. If you cannot download Smart Life app, please search “Smart Life”
on Google Play (for Android phone) or Apple Store (for iOS phone) to
download.
3. The smart switch can be also used with Amazon Echo and Google
Home. Please scan the QR code below and follow the instructions if
you have any trouble pairing with them.
QR code Smart Life
Aer you download the Smart Life App and register a new account,
please follow the instructions below to set up your smart switch.
APP Connection
Amazon-Echo Google-Home
Note:
1) Our products supports Bluetooth quick-fit and 2.4GHz Wi-Fi network.
2) 3 connection network modes: Bluetooth quick-fit Mode, Easy Mode, AP Mode.
Choose the most suitable mode to configure the network.
3) Please operate quickly when the white LED indicator blinks rapidly.
4) When indicator flash enters the network, complete standard operation
within the 3 minutes.
5) If you failed to connect with Wi-Fi network, please try to operate several
times more.
▶ Bluetooth quick-fit Mode ◀
2
1
1: Plug-in the device directly to the wall outlet.
The auto-connection comes with white LED
blinks. The LED will blinks 3 minutes.
If it stopped, please hold the button 5
seconds until the LED blinks again.
2. Turn on your Phone bluetooth. 3: Tap ‘+’ to add this plug
in the “Smart Life” APP.
3
Once pluged in, it will enter into the
Buletooth auto-connection mode.
Plug x 1
Screw x 1
Plastic Anchor x 1
Insert in connector when not in use.
(C) Protector
www.minoston.com
WF96 说明书
展开：210 x 297 mm
材质：80G书写纸
单色印刷

4: You'll see “Devices to be
added”---“Go to add”.
5: Click to “Add ”
6: Enter the Wi-Fi Password (Your
phone should have connected
to the same Wi-Fi first).
7: Wait for the app to connect to
your Wi-Fi until it’s 100%.
8: Click the new smart plug you just
added and you can start using it
now.
6
When the
Bluetooth is off,
APP will remind:
“You are advised to
enable Bluetooth”.
8
7
6
5
Tap ‘+’ to add a
device in your app
1 2 3Hold the button 5 seconds
until “white” LED blinks
rapidly.
4
Enter the Wi-Fi
Password
Select “Electrician ”-
“Socket (Wi-Fi)”
Click to “Continue ”
Select “is fast blinking(0.5s/time)”
Click and edit the name of switch!
▶ Easy Mode ◀
100%
8
Outdoor Dual Plug
4 5
OTHER WARNINGS
Risk of Fire
Risk of Electrical Shock
Risk of Burns
CAUTION - PLEASE READ!
This device (MP23WD) is intended for installation in accordance with the
National Electric Code and local regulations in the United States, or the
Canadian Electrical Code and local regulations in Canada. If you are unsure or
uncomfortable about performing this installation consult a qualified
electrician.
MEDICAL EQUIPMENT
Please DO NOT use this plug to control Medical or Life Support equipment.
This device should never be used to control the On/Off status of Medical
and/or Life Support equipment.
FCC warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must acceptany interference received, including interference that
may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm
between the radiator& your body.
Unlock operation: click unlock on the
APP or press the device button 4 times
quickly.
or
X 4
Child lock
7
Wait for it’s 100%
(LED stays in green 3 seconds.)