4. Adjustments
4.1 Remove the seat cushion
06
4.2 Adjusting the handle position
The handle (part no.27) of CS128 child seat can adjust to difference
position . Method as below:(Fig. 3)
4.2.1. Press the handle release button (part no.26 page 01) on the handle at
same time by both hand .
4.2.2. Now toward the arrow direction push backward and forward can adjust
the position.(Fig. 3)
4.2.3.Then Release the button when the handle is at the right position. The
function of the position as (fig. 4,5,6 ) shows.
4.2.4.Push backward and forward again to confirm the seat is locked firmly.
The CS128 must be used for children from 0 to
10kg(approximately new born to 10 months old )
with the seat cushion (Fig. 1).
Once your child 's weight is between 10kg to
13kg (the approximately 10 months to approximately
15months) you must remove it as below:
Press on the release button (part no.23 page 01)
and separate the buckle tongue (part no.24 ),
Then pull at the edge of the seat cursion to remove
it.(fig.2)
Flat position:for storage
XH-YS-043
BELT
HERE
seat cushion
1
34
5 6
2
Upright position:for
transport the baby
XH-YS-043
BELT
HERE
Surpor t position:for putting
your child in or out the seat
XH-YS-043
BELT
HERE
