Miroco MF005 User manual
尺寸：115mm*115mm
骑马钉
封面128g铜版纸，内页80g书
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS 01
Package Contents 06
Product Diagram 07
Specifications 08
Preparation Guide 09
Before First Use 10
Using Your Milk Frother 11
Hints & Tips 21
Cleaning and Maintenance 22
Troubleshooting 24
Warranty and Service 27
T
h
ank
s
f
o
r
c
h
oo
s
in
g
Milk
F
r
o
t
h
e
r
.
P
l
e
as
e
r
e
a
d
this
User Guide thoroughly before use and retain it for
futur
e
r
e
f
e
r
e
n
c
e
.
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INFORMATION AND
INSTRUCTIONS. KEEP FOR FUTURE REFERENCE.
FOR HOUSEHOLD USE ONLY
WARNING
When using electrical appliances, basic precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons,
including the following:
·
This product should be used only in accordance with the
specifications outlined in this User Guide. Usage other than what
has been specified here may result in serious injury.
·
R
e
a
d
all
in
s
t
ruc
ti
o
n
s
be
f
o
r
e
us
in
g
t
h
e
ap
plian
c
e
.
·
This appliance must be earthed reliably.
·
To reduce the risk of fire, electric shock, and injury to persons, never
immerse the power base, power cord, power plug or the appliance in
water or allow moisture to come into contact with these parts.
·
Stop using the product when it is damaged in any manner
(including breakage of the cable).
·
Do not touch any live part of the device when it is powered on.
01
·
Do not place on or near a hot gas or electric burner, or in a heated
oven.
·
This appliance must be provided with correct voltage via a
professionally installed power socket.
·
Do not operate the appliance with a damaged cord or plug or after
malfunctions occur, or has been damaged in any manner. Return
the appliance to the nearest authorized service facility for
examination, repair or adjustment.
·
Be sure not to make the main cable hang loosely, or contact or
move the plug with a wet hand, or put the plug on any surface of a
heating object, or keep it in contact with oil.
·
Always remove the plug from the power outlet and allow to cool if
the appliance is not in use, before attempting to move the
appliance, before cleaning, disassembling, assembling and when
s
t
o
rin
g
t
h
e
ap
plian
c
e
.
·
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by
pe
r
s
o
n
r
e
s
po
n
si
b
l
e
f
o
r
t
h
ei
r
sa
f
e
t
y
.
·
Frothing whisk is a choking hazard. Children must always be
supervi
s
ed
and
n
e
v
e
r
l
e
ft
un
at
t
e
n
ded
wit
h
ap
plian
c
e
.
B
e
sur
e
n
o
t
l
e
t
an
y
c
hil
d
p
l
a
y
wit
h
t
hi
s
ap
plian
c
e
.
·
This appliance is for household use only. Do not use the appliance
for anything other than its intended purpose as described in this
User Guide. Do not use outdoors. Not suitable for commercial and
industrial use.
·
Dispose of this product as per local regulations.
·
Do not let the cord hang over the edge of a table or counter, or
touch hot surfaces.
·
The use of accessory attachments not recommended by the
appliance manufacturer may result in fire, electric shock or injury to
persons.
·
Do not attempt to modify or repair the product by yourself.
02 03
CAUTION
·
Never fill milk higher than the max level or lower than the minimum
level marked on the inner wall to avoid overflow.
·
Do not operate the appliance when there is no milk inside it.
·
Always ensure the whisk is securely attached to the milk jug before
use.
·
Do not touch the frothing whisk when the unit is working.
·
Do not touch hot surfaces. Use handles or knobs.
·
The appliance has been designed specifically for the purpose of
foaming milk and other dairy milk alternatives and is not intended
to whip, thicken or heat other food substances e.g. oil, eggs, butter,
h
e
avy
whip
p
in
g
c
r
e
am,
s
o
up
s,
gr
a
vi
e
s
e
t
c
.
·
The appliance is not designed to mix a large quantity of dry
ingredients or melt large food pieces e.g. cubed chocolate, ground
nut
s,
wh
o
l
e
s
p
i
c
e
s,
fresh
h
e
rb
s,
i
c
e
c
ub
e
s
e
t
c
.
·
Do not touch the metal parts, whisk, and surface of this product
when it is powered on to avoid scald.
·
Do not remove the lid when the unit is working to avoid scald. The
milk frother can be used only in combination with its jug and lid.
·
Do not leave the appliance unattended when in use.
·
Ne
v
e
r
ope
r
at
e
t
h
e
ap
plian
c
e
o
n
un
e
v
e
n
surf
a
c
e
.
·
Do not put your finger or any objects into the gap of the frother
when it is working.
·
Make sure to use the appropriate whisk.
·
To disconnect, turn any control to “off”, then remove the plug from
the wall outlet.
·
Clean the jug immediately after each use. Flush and clean the walls,
then dry with a soft cloth.
·
Do not use harsh abrasive, caustic cleaners or oven cleaners when
c
l
eaning
t
h
e
ap
plian
c
e
.
SAVE THESE INSTRUCTIONS
This appliance can be used by children aged from 8 years and above
if they have been given supervision or instruction concerning use of
the appliance in a safe way and if they understand the hazards
involved.
Cleaning and user maintenance shall not be made by children unless
they are older than 8 and supervised. Keep the appliance and its cord
out of reach of children aged less than 8 years.
04 05
Package Contents
•
1 x Milk Frother (MF005)
•
1 x Frothing Whisk
•
1 x Frothing Whisk Holder
•
1 x Chocolate Cover
•
1 x User Guide
Product Diagram
①
⑥
②
③
④
⑤
⑧
①Transparent Lid
②
Stainless Steel Milk Jug
③Power Base
④Function Panel
⑤
Power Button
⑥
Chocolate Cover
⑦Frothing Whisk
⑧
Frothing Whisk Holder
⑨
MAX Level for Heating
⑩
MAX Level for Frothing
⑪
MIN Level for Frothing
06 07
Specifications Preparation Guide
As a general guide, the chart below shows the whisk function,
capacity, operating time and temperature for your reference.
08 09
Model
MF005
Input
230V~ 50Hz
Power
550W
Maximum Temperature
65°C - 85 °C /149°F - 185°F
Maximum Capacity for Frothing
250ml / 8.5oz
Maximum Capacity for Heating
500ml / 16.9oz
Whisk
Function
Time
Temperature
16.9oz
16.9oz
Before First Use
•
Remove and safely discard all promotional labels and packing
materials attached to the milk frother.
•
Before first use, wash the milk jug, frothing whisk and lid in warm
water with a little detergent then rinse and dry thoroughly. Wipe the
exterior of the power base with a soft damp cloth then dry
thoroughly.
Using Your Milk Frother
Mode Selection
1.
Press the Power Button once to turn on the milk frother. Press it
once again within 2 seconds to switch to the next mode. To select
the desired mode, please make sure the button is pressed within 2
seconds each time.
2.
Each time you press the Power Button within 2 seconds, you can
cycle through 4 modes with the corresponding icon lighting up.
3.
When the Power Button is pressed once during working, the milk
frother will enter Standby mode. Press the button once again to
restart the frother with the last set mode on.
Milk Jug Detection
1.
Place the power base with milk jug on a flat level surface and plug
the power cord into a power outlet.
2.
If the milk jug is not firmly placed onto the power base, the frother
will not start working with red indicator flashing for 5 minutes after
pressing the Power Button.
10 11
Note:
•
The operating time varies with the environment, milk type and
initial temperature of the frother.
•
The above operating time is counted based on heating the
milk of 10°C under ambient temperature of 25°C.
Stirring & Heating
4
1.
Place the frothing whisk (without chocolate cover) inside the milk jug.
2.
Pour milk into the jug. Do not exceed the MAX Level for
Heating (500ml).
3.
Press the Power Button within 2 seconds to select the Stirring &
Heating mode.
4.
The will light up red to start stirring & heating. Once completed,
the
will keep flashing red for 30 seconds and turn off. Once the
1 2 milk jug is removed before light off, all red lights will keep flashing for
5 minutes until the power is cut off or the milk jug is put back into
12 the power base. 13
Frothing & Heating
4
1.
Place the frothing whisk (without chocolate cover) inside the milk jug.
2.
Pour milk into the jug. Do not exceed the MAX Level for
Frothing (250ml).
3.
Press the Power Button within 2 seconds to select the Frothing &
Heating mode.
4.
The will light up red to start frothing & heating. Once completed,
the
will keep flashing red for 30 seconds and turn off. Once the
1 2 milk jug is removed before light off, all red lights will keep flashing for
5 minutes until the power is cut off or the milk jug is put back into the
14 power base.. 15
Frothing & Heating Chocolate Milk
500ml 60g
3
1.
Place the frothing whisk (with chocolate cover) inside the milk jug.
2.
Pour milk (500ml) and chocolate powder (60g) into the jug. For better
mixing of milk and chocolate, please do not remove the frothing whisk
when adding the ingredients.
3.
Press the Power Button within 2 seconds to select the Frothing &
Heating Chocolate Milk mode.
4.
The
will light up red to start frothing & heating chocolate milk.
1 2
Once completed, the will keep flashing red for 30 seconds and
turn off. Once the milk jug is removed before light off, all red lights will
keep flashing for 5 minutes until the power is cut off or the milk jug is
16 put back into the power base. 17
4
Frothing Cold Milk
1.
Place the frothing whisk (without chocolate cover) inside the milk jug.
2.
Pour milk into the jug. Do not exceed the MAX Level for
Frothing (250ml).
3.
Press the Power Button within 2 seconds to select the Frothing Cold
Milk mode.
4.
The
will light up blue to start frothing cold milk. Once completed,
the
will keep flashing blue for 30 seconds and turn off. Once the
1 2
milk jug is removed before light off, all red lights will keep flashing for
5 minutes until the power is cut off or the milk jug is put back into the
power base.
18 19
4
Milk Frother Sounds
Hints & Tips
1.
During the operation, the milk frother will alert you with beep sounds.
·
Beep once when
i.
plugged in,
ii.
starts working under selected mode, or
iii.
milk jug is removed from the power base.
·
Beep 3 times when the selected mode is completed.
2.
To mute the sounds, press and hold the Power Button for 3 seconds.
·
We recommend the use of a long life milk (UHT) with a high protein
content. If you insist on non-dairy milk, a Barista style non-dairy
milk is recommended which should help with the milk froth for plant
milk. Froth result cannot be guaranteed for any other non-barista
style plant milk.
·
For best results, the milk should be taken from the refrigerator
immediately before frothing. The colder the milk, the better. We
suggest the milk temperature is around 4~6°C (39.2~42.8°F).
·
For optimal froth, froth and heat the milk first, then prepare coffee
and hot chocolate when the milk frother is working.
·
Milk can heat up to 70±5°C
（
149-167°F
)
, which is the optimal
temperature for drinking. Over-heating will destroy milk nutrients.
·
This milk frother is also suitable for frothing the frozen milk.
However, it does not mean that the frozen milk can be made into
frozen milk foam since heats will be generated during working.
·
Never fill milk over the MAX Level. Make sure to use the appropriate
whisk. Check the corresponding level. MAX Fill Line (250ml / 8.5oz)
20 21
before frothing milk. MAX Fill Line (500ml / 16.9oz) before heating milk.
·
Pour frothed milk promptly to avoid the milk from separating.
·
Clean the milk jug immediately after each use. Flush and clean the
walls using warm, soapy water and a non-abrasive cloth. Then dry
with a soft cloth. The milk jug and lid can be washed in the
dishwasher.
Cleaning and Maintenance
water. Once the milk jug and frothing whisk have cooled completely,
remove the frothing whisk and rinse off any milk in warm water.
·
Wash the milk jug, jug lid, and frothing whisk in warm soapy water,
rinse and dry thoroughly.
·
Wipe the exterior of the power base with a soft damp cloth. Dry
thoroughly.
·
Store the cleaned milk jug, jug lid, and frothing whisk in safe place
away from children.
Both the milk jug and frothing whisk should be cleaned immediately
after each use to prevent build-up of milk residue.
·
Unplug the power cord from the power outlet before cleaning.
·
To avoid the risk of electric shock, do not clean the base or the
power cord with water and do not immerse them.
·
The milk jug and frothing whisk will be hot immediately after use, so
carefully remove the milk jug from the power base and fill with tap
22 23
Note:
·
Do not use alkaline or abrasive cleaning agents, steel wool or
scouring pads on any part of the milk frother as these can
damage the appliance surfaces.
·
Never immerse the power base in water or any other liquid.
The outside of the milk jug must always be clean and dry
before placing on the power base prior to use.
·
The milk jug and lid can be washed in the dishwasher.
Troubleshooting
Problem
Possible
Causes
Solution
Milk is not
foaming?
Milk is warm or
too hot to foam.
•
Use cold, fresh (or freshly
opened) milk.
•
Do not re-foam already heated
milk.
•
Try reducing the quantity of
milk in the milk jug.
•
Try a different milk. Experiment
with different milk and frothing
whisks to achieve the desired
result.
Milk is not
heating
/
•
Ensure the milk jug is correctly
positioned onto the power base.
•
Ensure that the milk frother has
been properly turned on.
24 25
Problem
Possible
Causes
Solution
Frothing
whisk is
not moving
or is
dislodged
•
Frothing whisk
is not placed
c
o
rr
e
c
t
l
y
.
•
Take out
the frothing
whisk during
working.
•
Ingredients
have been
added too
qu
i
c
k
l
y
.
•
Stop operation.
•
Remove liquid from milk jug.
•
Place the frothing whisk inside
the milk jug before turning on
t
h
e
milk
f
r
o
t
h
e
r
.
•
Refill milk jug with liquid.
•
Start frothing. Add ingredients
(if desired) slowly and in small
quantities after the milk has
already started frothing.
Red
indicator
flashes
Milk jug not
detected.
Make sure the milk jug is firmly
placed onto the power base.
Warranty and Service
This product is covered with product and labor warranty for12
months from the date of its original purchase. If any problems
occur, please contact the M ustomer Care Centre in your country via
the contact information listed in this User Guide.
26 27
Problem
Possible
Causes
Solution
Grinding
noise
•
Frothing whisk
is not placed
c
o
rr
e
c
t
l
y
.
•
Take out
the frothing
whisk during
working.
•
The milk jug
has been
removed from
the power
base during
operation.
•
Place the frothing whisk inside
the milk jug before turning on
t
h
e
milk
f
r
o
t
h
e
r
.
•
Remove the milk jug from the
power base after each process
is completed with icon flashing.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including
interference that may cause undesired operation.
Table of contents
Other Miroco Kitchen Appliance manuals
