1
2
3
4
5
6
7
1. Transparent Lid
2. Stainless Steel Frothing Pitcher
3. LED Indicator
4. Power Button
5. Power Base
6. 2 x Whisk (Heating)
7. 2 x Whisk (Frothing )
Thank you for choosing the Miroco Milk Frother. Please read this manual carefully and keep it for
future reference. If you have any questions or issues, please contact our customer support team by
email at support@mirocohome.com.
How to use
Caution
1. Choose an appropriate whisk and
assemble it onto the tip on the base of
the frothing pitcher
2. Pour milk into the frothing pitcher no higher
or lower than the maximum and minimum
markings inside
Whisk
Whisk
(Frothing)
Whisk
(Heating)
Function
Frothing cold milk
Frothing & Heating
Heating
(with a small amount of froth)
Max Capacity
115 ml / 3.9 oz
115 ml / 3.9 oz
240 ml / 8.1 oz
Time
60-65s
120-160s
210-250s
Temperature
/
65°C / 149°F
65°C / 149°F
Functions
Heating & Frothing /
Heating Milk
Frothing Cold Milk
LED Indicator Status
When the Device is Working
Press the Power Button, the red and blue LED
will light up to start heating & frothing milk
Press and hold the Power Button for 1 to 2 seconds,
the blue LED will light up to start frothing cold milk
LED Indicator Status When
the Process Is Complete
The blue LED turns off and
the red LED keeps flashing
The blue LED turns off and
the red LED keeps flashing
3. Cap on the lid. Refer to table below to operate the device.
1. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
2. Do not disassemble the unit.
3. Keep away from heat, moisture, and corrosive substances.
4. Do not remove the power cable with wet hands as it may cause an electric shock.
5. Use whole milk (fat content > 3.0%) for the best results.
M
I
L
K
