MISUMI IESH-MB205G-R Installation and operation manual

IESH-MB205G-R
Industrial Unmanaged Gigabit Ethernet Switch
The IESH-MB205G-R comes equipped with all the
standard features. Furthermore, it offers a +12~48
VDC redundant power input design, and is secured
with a double protection mechanism; Power polarity
Reverse Protect and an Overload Current Reset- able
Fuse. The former tolerates reverse power wiring
(devices will not be damaged if the plus and minus
power cables are mixed, even continuing to opreate
normally. The later secures the system from overload
currents; when the power supply turns normal,
IESH-MB205G-R will automatically get back to work.
Each port of IESH-MB205G-R has 2 LED’s to show
the link status transmission speed and collision status.
It also provides a relay output for an event alarm. In
the event of a power failure, the built-in LED will
activate the alarm to notify administrators. Engineers
can simply verify the hardware status by checking the
LED, and have troubleshooting easy and quick.
IESH-MB205G-R comes with compact metal housing
that rates IP30 to help against from dusty industrial
environments.
Before installation, please make sure that you have
received the following:
 1 x IESH-MB205G-R Ethernet Switch
 2 x Wall mounting brackets with screws
 1 x DIN-rail Mounting Bracket and Screws
 2 x IESH-MB205G-R Startup Manual
General
 Compatibility: IEEE 802.3, 802.3u, 802.3x,
802.3ab
 LAN: LAN: 10/100/1000Base-T(X)
 Ethernet RJ-45: Up to 100 m
 Connectors: 5 x 10/100/1000Base-T/TX RJ-45
ports
 Switch Architecture: Store and Forward
 Power Requirement: 12~48VDC, redundant Power
Input with reverse polarity protection.
 Power Consumption: 2.5W
 Dimensions (W x H x D): 30 x 140 x 95 mm
 Enclosure: IP30
 Operating Temperature:
-40 ~ 75°C (-40 ~ 167°F)
 Storage Temperature: -40 ~ 85°C (-40°F ~ 185°F)
 Operating Humidity: 10 ~ 95% (non-condensing)
 Storage Humidity: 10 ~ 95% (non-condensing)
 Safety: UL 61010
 EMC: FCC Class A, CE
1 Startup Manual
LED definition
Packing List
SpecificationsOverview
STARTUP MANUAL

The IESH-MB205G-R switch supports dual +12~48VDC
power inputs and changes relay status when power
failure occurs.
1. Insert the positive and negative wires into the V+ and
V- contacts on the terminal block connector.
2. Tighten the wire-clamps screws to prevent the DC
wires coming loose.
Warning: This is a Class A product. In domestic
environment this product may cause radio interference
in which case the user may be required to take adequate
measures.
Warning: This product is intended to be supplied by a
Listed Power Adapter or DC power source, rate 12 ~ 48
VDC, 1.5A; Tma 60 degree C, if need further assistance,
please contact Advantech for further information.
DIN-rail Mounting
1. Installing the DIN-Rail Mounting Kit.
2. Removing the DIN-Rail.
Wall Mounting
1. Attach the brackets included to the switch with
screws.
2. With the brackets attached, hang the switch to nails
on the wall.
Startup Manual 2
1
2
Mounting
Overview
Power Connection
Wire Range