Mitsubishi Electric City Multi PUHY-P168TSJMU-A User manual

Job Name: Location:
Engineer Name: Contractor:
System No.: Date:
Model: PUHY-P168TSJMU-A
(Consists of One PUHY-P96TJMU-A, One PUHY-P72TJMU-A, and One CMY-Y100VBK2 Twinning Kit)
OUTDOOR VRF HEAT PUMP SYSTEM FEATURES
• 3-phase, 208/230V
• Modular variable refrigerant flow (VRF) systems;
smaller capacity units can be piped together to form a single,
large-capacity two-pipe system
• Required Twinning Kit allows for easy field piping connection
• Selectable fan static, 0.12 or 0.24"WG external static pressure;
factory set to 0"WG
•Maximum Total Refrigerant Piping Length: 3,280';Maximum
Refrigerant Line Length: 541';Maximum Control Wiring Length:
1,650'
• Connects to CITY MULTI indoor units; controlled via
CITY MULTI Controls Network (CMCN)
• External finish: Pre-coated Galvanized-steel Sheets
• Operating Temperature Range
Cooling (Outdoor): 23° ~ 115°F (-5° ~ +46°C) DB
Heating (Outdoor): -4° ~ +60°F (-20° ~ +16°C) WB
PUHY-P72TJMU-A
OPTIONAL PARTS
□Twinning Kit*.…………………………………...…….CMY-Y100VBK2
□T-Branch Joint (≤ 72,000 Btu/h)………………..........CMY-Y102S-G2
□T-Branch Joint (≤ 144,000 Btu/h)……………….…....CMY-Y102L-G2
□T-Branch Joint (≤ 234,000 Btu/h)……………….........CMY-Y202-G2
□Header (4-Branch;≤72,000 Btu/h)........………………CMY-Y104-G
□Header (8-Branch;≤144,000 Btu/h)......………………CMY-Y108-G
□Header (10-Branch;≤234,000 Btu/h)....………………CMY-Y1010-G
* Twinning Kit is necessary to combine the refrigerant flows of the
modules and is sold separately.
Specifications System Module 1 Module 2
Unit Type PUHY-P168TSJMU-A PUHY-P96TJMU-A PUHY-P72TJMU-A
Nominal Cooling CapacityBtu/h 168,000 96,000 72,000
Nominal Heating CapacityBtu/h 188,000 108,000 80,000
External Dimensions (H x W x D)In. / mm Refer to Module Data 65 x48-1/16 x29-15/16 /
1,650 x1,220 x760
65 x 36-1/4 x 29-15/16 /
1,650 x 920 x 760
Net Weight Lbs. / kg 938 / 425 497 / 225 441 / 200
Electrical Power Requirements Voltage, Phase, Hertz Refer to Module Data** 208 / 230V, 3-phase, 60Hz**
Cooling Power Input kW 13.62 Refer to System Data
Heating Power Input kW 14.65
Cooling Current (208/230V)R.L.A. 42.0 / 37.9 Refer to System Data
Heating Current (208/230V)R.L.A. 45.1 / 40.8
Minimum Circuit Ampacity
(MCA)** ARefer to Module Data**36 / 34** 25 / 24**
Recommended Fuse/Breaker
Size** ARefer to Module Data**40** 30**
Maximum Fuse Size** ARefer to Module Data** 50 / 50** 30 / 30**
Piping Diameter
Refer to System Data
From TwinningKitto Indoor Units
(Brazed) (In. /mm)
Liquid (High Pressure) 5/8 / 15.88
Gas (Low Pressure) 1-1/8 / 28.58
From Modules to Twinning Kit
(Brazed) (In. / mm)
Liquid (High Pressure) Refer to Module Data 3/8 / 9.52 3/8 / 9.52
Gas (Low Pressure) 7/8 / 22.2 3/4 / 19.05
Indoor Unit Total Capacity 50 to 130% of ODUs Refer to System Data
Model / Quantity P06 ~ P96 / 1 to 36
Sound Pressure Levels dB(A) 61.0 58.0 58.0
Fan
Refer to Module Data
Type x Quantity Propeller Fan x 1 Propeller Fan x 1
Airflow Rate CFM 6,180 6,180
Direct-drive InverterMotor Output kW 0.92 0.92
Compressor Operating Range 8% to 100% Refer to System Data
Compressor Type x Quantity
Refer to Module Data
Inverter-driven Scroll Hermetic x 1 Inverter-driven Scroll Hermetic x 1
Compressor Motor Output kW 6.8 5.1
Compressor Crankcase Heater kW 0.045 0.035
Refrigerant Refer to Module Data R410A
Lubricant MEL32
High-pressure Protection Device
Refer to Module Data
601 psi / 4.15 MPa 601 psi / 4.15 MPa
Compressor / Fan Protection Device Overheat Protection / Thermal Switch Overheat Protection / Thermal Switch
Inverter Protection Device Overheat / Overcurrent ProtectionOverheat / Overcurrent Protection
BlueFinAnti-corrosion Protection: Cellulose- and polyurethane-resin coating treatment applied to condenser coil that protects it from air contaminants;
≥1μm thick; Salt Spray Test Method - no unusual rust development to 480 hours.
PUHY-P96TJMU-A
** Each individual module requires a separate electrical connection. Reference electrical data for each individual module.

Outdoor Unit: PUHY-P168TSJMU-A – DIMENSIONS

Twinning Kit: CMY-Y100VBK2
Inches (mm)
ID ø 3/4
(19.05)
ID ø 1/2
(12.7)
OD ø 5/8
(15.88)
OD ø 7/8
(22.2)
OD ø 7/8
(22.2)
OD ø 1/2
(12.7)
ID ø 1-1/8
(28.58)
ID ø 3/8
(9.52)
2-1/2 (62)
2-1/2 (62)
1-15/16 (49)
OD ø 1/2
(12.7)
ID ø 1/2
(12.7)
OD ø 1/2
(12.7)
ID ø 1/2 (12.7)
OD ø 5/8
(15.88)
ID ø 5/8
(15.88)
7-1/4 (183)
9-1/2 (241)
3-5/16 (83)
3-7/8 (98)
ID ø 7/8 (22.2)
ID ø 7/8 (22.2)
ID ø 1-1/8 (28.58)
OD ø 1-1/8 (28.58)
OD ø 1 (25.4)
OD ø 1 (25.4)
6-5/16 (160)
23-3/16 (588)
13-1/2 (342)
19-15/16 (505)
1-15/16 (49)
<Reducer Pipe (Accessory)>
For instructions on piping the units together using the twinning kit,
see the Installation Manual.

Module 1: PUHY-P96TJMU-A – DIMENSIONS

Mitsubishi Electric Sales Canada Inc.
www.MitsubishiElectric.ca
Specifications are subject to change without notice.
SB_PUHY-P168TSJMU-A_201007
Certificate Number FM33568
Certificate Number EC97J1227
Mitsubishi Electric Air Conditioning & Refrigeration Systems Works acquired ISO
9001 certification under Series 9000 of the International Standard Organization (ISO)
based on a review of quality warranties for the production of refrigeration and air
conditioning equipment.
ISO Authorization System
The ISO 9000 series is a plant authorization system relating to quality warranties as
stipulated by the ISO. ISO 9001 certifies quality warranties based on the "design,
development, production, installation and auxiliary services" for products built at
an authorized plant.
Mitsubishi Electric Air Conditioning & Refrigeration Systems Works acquired environmental
management system standard ISO 14001 certification.
The ISO 14000 series is a set of standards applying to environmental protection set by the
International Standard Organization (ISO).
Module 2: PUHY-P72TJMU-A – DIMENSIONS