Mitsubishi SR-SDI User manual

MITSUBISHI COVER GOES HERE

Trademarks and Copyrights—This manual is
copyright © 1999 by Mitsubishi and copyright © 1995-
1999 by Hughes Network Systems. Software contained in
the digital satellite receiver and referenced in this manual is
copyright © 1995-1999 by Hughes Network Systems.
Some features are patent pending. WatchWord, PreSelect,
TurboTune, AlphaTune and OneLine Guide are trademarks
of Hughes Network Systems. DIRECTV, DIRECTV PLUS
and DIRECT TICKET are trademarks of DIRECTV, Inc. a
unit of Hughes Electronics Corp., and are used with
permission. “NFL,” the NFL Shield and “NFL SUNDAY
TICKET” are registered trademarks of The National
Football League and its affiliates. “NBA LEAGUE PASS”
is a trademark of NBA Properties, Inc. “NHL,” the NHL
Shield and “NHL CENTER ICE” are registered trademarks
of the National Hockey League. “ESPN Full Court” and
“MLS/ESPN SHOOTOUT” are trademarks of ESPN, Inc.
“MLB,” “MLB EXTRA INNINGS,” “Major League
Baseball” and the Major League Baseball silhouetted batter
logo are service marks of Major League Baseball
Properties, Inc. Major League Baseball trademarks and
copyright are used with permission of Major League
Baseball Properties, Inc. All other trademarks and service
marks are the property of their respective owners.
This product is the subject of one or more U.S. or foreign
patentspending.
Disclaimer—Every effort has been made to ensure the
correctness and completeness of the material in this
document. No company shall be liable for errors contained
herein. The information in this document is subject to
change without notice. No warranty of any kind is made
with regard to this material, including, but not limited to,
the implied warranties of merchantability and fitness for a
particular purpose.
StarSight Information—StarSight®features licensed
under one or more of the following U.S. patents: 4,706,121;
5,151,789; 5,335,277; 5,353,121; 5,479,266; 5,479,268;
and 5,532,754. Use rights reserved.
Macrovision Information—This device incorporates an
anticopy process technology that is protected by U.S.
patents and other intellectual property rights. The anticopy
process is licensed for noncommercial, home use only.
Reverse engineering or disassembly is prohibited.
Note on Recording Programming—Mosttelevision
programs and films are copyrighted. This means that
someone has legal rights governing the reproduction and
distribution of this material. In certain circumstances,
copyright law may apply to private in-home taping of
copyrighted materials. In most cases, it is permissible to
record for personal use, as long as you do not sell the
material. You must act responsibly in this area — check
into the matter if you are unsure.
Some pay per view programs may be licensed from
producers as “view only” programs. These are copyrighted
programs and may not be copied or reproduced for any
purpose without the express written permission of the
copyright owner.
DIRECTV®Programming—For subscription
information, or to resolve problems related to
programming, call the service provider, DIRECTV at
1-800-DIRECTV (347-3288).
Satellite System Hardware and Installation—To
arrange for professional installation of your satellite
system, ask questions, or to resolve problems, contact your
dealer. If additional information is needed, please contact
Mitsubishi Consumer Relations toll free at
1-800-332-2119.
Mitsubishi Consumer Relations
1-800-332-2119
Subscriptions and pay per view
1-800-DIRECTV
PLEASE MAKE NOTE OF THE FOLLOWING
INFORMATION FOR WARRANTY
System Model #: ___________________________
Receiver Model #: SR-SD1
Receiver Serial #: ___________________________
Access Card #: __________ __________ __________
LNB Serial #: ________________________________

IMPORTANT SAFETY INSTRUCTIONS
For your safety and protection, read this entire Owner’s Manual before you attempt to install or use your satellite system. In
particular, read this safety section carefully. Keep this safety information where you can refer to it if necessary.
Heed Warnings—All warnings on the product and in the operating instructions should be adhered to.
Follow Instructions—All operating and use instructions should be followed.
THESE ARE DEFINITIONS FOR ALERTS USED IN THIS MANUAL
WARNING or CAUTION
Where you see this alert symbol
and the WARNING or CAUTION
heading, strictly follow the warning
instructions to avoid personal injury.
DANGER
Electric shock hazard: Where you
see these symbol and the DANGER
heading, strictly follow the warning
instructions to avoid electric shock
injury.
THESE ALERTS APPEAR IN THIS MANUAL
DANGER
Do not select a location to install the satellite
dish antenna near power lines. You can be
killed if the satellite dish antenna comes into
contact with electric power lines.
•Do not contact overhead power lines
•Check the distance to any nearby power
lines before starting installation. Stay at
least 20 feet away from all power lines.
•If any part of the satellite dish antenna or
mast assembly comes into contact with a
power line, call your local power
company. Do not try to remove it
yourself. They will remove it safely.
CAUTION
Local electric codes and the National Electric
Code (NEC) require the satellite dish antenna
to be grounded. Grounding the satellite dish
antenna helps protect against damage caused
by static voltage buildup. Grounding can also
protect against voltage surges created by
nearby lightning strikes.
WARNING
For your own safety, follow these important
safety rules:
•Perform as many functions as possible
on the ground.
•Do not install the satellite dish antenna
on a rainy or windy day.
•If you start to drop the satellite dish
antenna or mast assembly, get away
from it and let it fall.

INSTALLATION
Polarization—This digital satellite receiver is equipped
with a plug that will fit into the power outlet only one way.
Do not modify the plug defeating this feature. If the plug
does not fit, contact your electrician to replace your outlet.
To prevent electric shock, do not use this plug with an
extension cord or outlet unless you can fully insert the
blades without blade exposure.
Power Sources—Operate this digital satellite receiver
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power
company.
Power-Cord Protection—Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, pay
particular attention to cords at plugs, convenience
receptacles, and at the point where they exit from the
product.
Overloading—Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
Ventilation—Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
For electrical safety, power line operated equipment or
accessories connected to this unit should bear the UL
listing mark should not be modified so as to defeat the
safety features. This will help avoid any potential
hazard from electrical shock or fire. If in doubt, contact
qualified service personnel.
Heat—The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
Accessories—To avoid personal injury or damage to the
digital satellite receiver, do not place the digital satellite
receiver on any unstable cart, stand, table, or bracket. Any
mounting of the product should follow the manufacturer’s
instructions.
Attachments—Do not use attachments unless
recommended by Mitsubishi as they may cause hazards.
Satellite Dish Antenna Grounding—The outdoor
satellite dish antenna used to receive satellite signals and
the cable used to connect the satellite dish antenna to the
indoor receiving unit are required to comply with local
installation codes and the appropriate sections of the
National Electric Code (NEC) and in particular Article 810-
15, which covers proper installation and grounding of
television receiving equipment, as well as to Article 820-
33, which specifies that the satellite dish antenna cable
ground shall be connected to the grounding system of the
building as close to the point of cable entry as practical.
These codes require proper grounding of the metal structure
of the outdoor satellite dish antenna and grounding of the
connecting cable at a point where it enters the house (or
other building). If you are having a professional installer
make the installation, the installer must observe installation
codes. This manual contains instructions on how to make
the installation in compliance with the NEC. If additional
local installation codes apply, contact local inspection
authorities.
EXAMPLE OF ANTENNA GROUNDING ACCORDING
TO THE NATIONAL ELECTRICAL CODE
INSTRUCTIONS CONTAINED IN “RADIO AND
TELEVISION EQUIPMENT”
Water and Moisture— WARNING! To reduce the risk
of fire or electric shock, do not expose this product to rain
or moisture.
Lightning—For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet,
disconnect the antenna and cable system, and disconnect it
from the telephone line. This will prevent damage to the
product due to lightning and power-line surges.
Television Antenna Information—Installing an
outdoor antenna can be hazardous and should be left to a
professional antenna installer. Do not locate the outside
antenna system in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside
antenna system, take extreme care to keep from touching
such power lines or circuits, as contact with them might be
fatal. If an outside antenna is connected to the digital
satellite receiver, be sure the antenna system is grounded so
as to provide some protection against voltage surges and
built-up static charges. Section 810 of the NEC, NFPA No.
70 1987, provides information with respect to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of the
grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode.
Note to CATV System Installer—This reminder is
provided to call the CATV system installer’s attention to

Section 820-40 of the NEC which provides guidelines for
proper grounding an, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Power Lines—Extreme care must be taken when
installing and adjusting or maintaining the outdoor antenna
and connecting cable, especially in the vicinity of overhead
power lines, electric lights, or power circuits. When
installing the outdoor antenna or cable, extreme care should
be taken to keep from touching or approaching such power
lines or circuits, as contact with them might be fatal.
Cleaning—Unplug this digital satellite receiver from the
wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Object and Liquid Entry—Never push objects of any
kind into this digital satellite receiver through openings as
they may touch dangerous voltages or “short out” parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the digital satellite receiver.
SERVICE
Servicing—Do not attempt to service this digital satellite
receiver yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. There
are no user serviceable parts inside. Refer all servicing to
qualified service personnel.
Conditions Requiring Service—Unplug this digital
satellite receiver from the wall outlet and refer servicing to
qualified personnel under the following conditions:
•When the power supply cord or plug is damaged.
•If liquid has been spilled on, or objects have fallen
into, the digital satellite receiver or it has been
exposed to water.
•If the digital satellite receiver does not operate
normally by following the operating instructions.
Adjust only those controls that are covered by the
operating instructions. Other adjustments may result in
damage and will often require extensive work by a
qualified technician to restore the digital satellite
receiver to its normal operation.
•If the digital satellite receiver has been dropped or the
cabinet has been damaged.
•When the digital satellite receiver exhibits a distinct
change in performance.
Replacement Parts—When replacement parts are
required, have the technician verify that the replacements
being used have the same safety characteristics as the
original parts. Use of replacement parts specified by the
manufacturer can prevent fire, electric shock, or other
hazards.
Safety Check—Upon completion of any service or
repairs to this digital satellite receiver, ask the service
technician to perform safety checks recommended by the
manufacturer to determine that the digital satellite receiver
is in safe operating condition.

FEDERAL COMUNICATIONS COMMISSION (FCC)
REGULATORY INFORMATION
Federal Communications Commission (FCC)—
This equipment complies with both Part 15 and Part 68 of
the FCC rules.
Part 15 compliance—
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by removing and applying power
to the equipment, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving satellite dish antenna.
•Increase the separation between the equipment and the
digital satellite receiver.
•Connect the equipment into an outlet on a circuit
different from that to which the digital satellite receiver
is connected.
•Consult the dealer or an experienced radio/TV technician
for help.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: “How to
Identify and Resolve Radio and TV Interference
Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, DC.
To meet FCC requirements, only peripherals (computer
input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this
device. Operation with non-certified peripherals is likely to
result in interference to radio and TV reception.
To meet FCC requirements, shielded cables are required to
connect the device to a personal computer, peripheral, or
other Class B certified device.
Part 68 compliance—
1. The FCC has established Part 68 of the FCC Rules,
which permit this device to be directly connected to
the telephone network. Standardized jacks are used for
these connections. This equipment should not be used
on coin lines or party lines.
2. If this device is malfunctioning, it may also be causing
harm to the telephone network; this device should be
disconnected until the source of the problem can be
determined and until repair has been made. If this is
not done, the telephone company may temporarily
disconnect service.
3. The telephone company may make changes in its
technical operations and procedures; if such changes
affect the compatibility or use of this device, the
telephone company is required to give adequate notice
of the changes. You will be advised of your right to
file a complaint with the FCC.
4. If the telephone company requests information on
what equipment is connected to their lines, inform
them of:
•the telephone number this unit is connected to.
•the ringer equivalence number (REN). The number
can be found on a label located on the bottom of the
equipment.
•the Universal Service Order Code (USOC) jack
required. This equipment requires a USOC RJ11
jack.
•the FCC registration number. The number can be
found on a label located on the bottom of this
equipment.

TABLE OF CONTENTS
A FIRST LOOK AT THE SATELLITE SYSTEM ........1-1
What You Should Do First.......................................1-1
How Does All This Work?.......................................1-1
SATELLITE SYSTEM COMPONENTS..............................1-2
The Satellite Dish Antenna.......................................1-2
The Digital Satellite Receiver..................................1-2
The Remote Control.................................................1-4
SETTING UP YOUR SATELLITE SYSTEM ...............2-1
INSTALLING REMOTE CONTROL BATTERIES..............2-1
CHOOSING THE BEST CONNECTION FOR YOUR
ENTERTAINMENT SYSTEM...........................................2-2
Hook Up the Audio/S-video Signals.........................2-2
Hook Up the Audio/Video Signals ...........................2-3
Hook Up the RF Signals ..........................................2-3
Hook Up to a Stereo System ....................................2-4
Distributing the Video Signal to Distant Rooms......2-5
Finishing Up............................................................2-5
CONNECTING THE VCR CONTROL CABLE.................2-6
Finding the VCR’s Remote Control Sensor.............2-6
REMOTE CONTROL EXTENDER ...................................2-6
Receiver Base Station Installation...........................2-7
Transmitter Nose Cone Installation.........................2-7
Battery Replacement................................................2-7
Setting the Address of your Digital Satellite Receiver
and Remote Control.................................................2-8
NOW YOU CAN TURN IT ON........................................2-8
CONTROLLING THE DIGITAL SATELLITE
RECEIVER......................................................................3-1
FRONT PANEL VS. REMOTE CONTROL KEYS..............3-1
BASIC NAVIGATION .....................................................3-1
INSTALLING THE SATELLITE DISH ANTENNA …4-1
DETERMINE WHERE TO POINT YOUR SATELLITE DISH
ANTENNA .....................................................................4-2
The INSTALLATION screen....................................4-2
ALIGNMENT RESULT Pop-up Panel.....................4-3
CHOOSING THE ANTENNA INSTALLATION SITE..........4-3
SELECTING AMOUNTING OPTION ..............................4-5
INSTALLING THE SATELLITE DISH ANTENNA ONTO A
WOODEN SURFACE......................................................4-5
Installation Procedure.............................................4-6
INSTALLING THE SATELLITE DISH ANTENNA ONTO A
BRICKSURFACE..........................................................4-7
Installation Procedure.............................................4-8
INSTALLING THE SATELLITE DISH ANTENNA ONTO A
CINDER BLOCK SURFACE............................................4-9
Installation Procedure.............................................4-9
INSTALLING THE SATELLITE DISH ANTENNA ONTO A
METAL POLE..............................................................4-11
Installation Procedure...........................................4-11
ATTACHING THE REFLECTOR ONTO THE LNB SUPPORT
ARM............................................................................4-12
Assembling the Satellite Dish Antenna..................4-12
ATTACHING THE SATELLITE DISH ANTENNA ASSEMBLY
TO THE MAST ORPOLE..............................................4-13
GROUNDING THE METAL POLE MOUNT...................4-14
Installation Procedure...........................................4-14
GROUNDING THE BASE PLATE...................................4-14
Installation Procedure...........................................4-15
INSTALLING AND ROUTING THE LNB COAXIAL CABLE
...................................................................................4-15
Installation Procedure...........................................4-16
CONNECTING THE COAXIAL CABLE TO THE LNB....4-16
Installation Procedure...........................................4-16
ATTACHING THE LNB TO THE LNB SUPPORT ARM.4-17
ROUTING THE LNB CABLE TO THE SATELLITE
RECEIVER...................................................................4-17
CONNECTING THE SATELLITE DISH ANTENNA .........4-17
POSITIONING THE SATELLITE DISH ANTENNA..........4-18
The INSTALLATION Screen..................................4-18
Pointing the Satellite Dish Antenna Using the “Box”
Method...................................................................4-19
AUTHORIZING YOUR SERVICE..................................4-21
WATCHING DIRECTVPROGRAMMING................5-1
BASIC CHANNEL CHANGING .......................................5-1
The Channel Banner ................................................5-1
The Information Banner...........................................5-1
The OneLine™ Guide..............................................5-2
TurboTune™ ...........................................................5-2
AlphaTune™............................................................5-2
ALTERNATE SERVICES.................................................5-3
Audio........................................................................5-3
Digital Audio............................................................5-3
THE ON-SCREEN GUIDES..........................................6-1
Choosing the Guide Style.........................................6-1
Descriptions.............................................................6-2
General On-Screen Guide Features ........................6-2
Using PreSelect........................................................6-3
PreSelecting Programs for Taping..........................6-3
PreSelecting Programs for Viewing........................6-3
Canceling PreSelected Programs............................6-3
THE PROGRAM GUIDE (SM. CELL)....................6-3
THE PROGRAM GUIDE (LG. CELL)....................6-4
THE TITLE GUIDE...................................................6-5
THE LOGO GUIDE....................................................6-6
THE WATCHWORDTM GUIDE .................................6-6
FILTERING THE GUIDES...............................................6-7
Theme Filters...........................................................6-7
Channel List.............................................................6-8
Guide Times.............................................................6-8
Class Filters.............................................................6-8
THE INFORMATION SCREEN .................................6-9
Done.........................................................................6-9
View..........................................................................6-9
PreSelect..................................................................6-9
PreSelect To View..................................................6-10
Cancel PreSelect....................................................6-10
Buy.........................................................................6-10

Buy Options............................................................6-10
Cancel Purchase....................................................6-11
Show Times............................................................6-11
DIGITAL SATELLITE RECEIVER’S MENU SYSTEM
.........................................................................................7-1
Menu Overview........................................................7-1
MAIN MENU.................................................................7-2
Setup.........................................................................7-2
Scheduler..................................................................7-2
Check Mail...............................................................7-2
Purchases.................................................................7-2
Help..........................................................................7-2
Lock/Unlock.............................................................7-2
SETUP MENU................................................................7-3
Preferences ..............................................................7-3
Limits .......................................................................7-3
Chan. Lists...............................................................7-3
TurboTune™ ...........................................................7-3
Installation...............................................................7-3
VCR Setup................................................................7-3
WatchWord..............................................................7-3
Current settings overview........................................7-4
SCHEDULER..................................................................7-4
Editing an event.......................................................7-4
CHECK MAIL...............................................................7-5
Message...................................................................7-5
Page.........................................................................7-5
Erase........................................................................7-5
PURCHASES..................................................................7-5
History/Upcoming....................................................7-6
Purchase History.....................................................7-6
Upcoming Purchases...............................................7-6
LOCK/UNLOCK............................................................7-6
Locking Procedure...................................................7-7
Unlocking Procedure...............................................7-7
Temporarily Overriding the Lock............................7-7
PREFERENCES ..............................................................7-8
Advanced..................................................................7-8
MultiColor................................................................7-8
Chan. Tags...............................................................7-8
Chan. Sort................................................................7-8
Scheme.....................................................................7-8
Audio........................................................................7-8
Language.................................................................7-9
Filters.......................................................................7-9
ADVANCED PREFERENCES...........................................7-9
Receiver ID..............................................................7-9
Screen Ratio.............................................................7-9
Channel Lock...........................................................7-9
Input Key..................................................................7-9
Demo Mode............................................................7-10
Factory Defaults ....................................................7-10
LIMITS........................................................................7-10
TV Timer................................................................7-10
Max Rating.............................................................7-11
Max Spending.........................................................7-11
CHANNEL LISTS .........................................................7-11
Rename...................................................................7-12
Auto Set..................................................................7-12
Clear......................................................................7-12
Set...........................................................................7-12
Tag Boxes...............................................................7-12
TURBOTUNE™..........................................................7-13
Set Channel............................................................7-13
INSTALLATION ...........................................................7-13
System Test.............................................................7-13
New Card...............................................................7-13
Satellite...................................................................7-13
Transponder #.......................................................7-13
Receiver ID............................................................7-14
Dish Type...............................................................7-14
Position..................................................................7-14
SYSTEM TEST.............................................................7-15
Receiver Test..........................................................7-15
Cable Test..............................................................7-15
VCR SETUP...............................................................7-15
Brand.....................................................................7-15
Code.......................................................................7-15
Test (Record/Stop)..................................................7-15
WATCHWORD............................................................7-16
WatchWord #.........................................................7-16
USING D-VHS FEATURES...........................................8-1
CONNECTING THE DIGITAL A/V CABLE.....................8-1
VCR SETUP.................................................................8-1
Recording Type........................................................8-1
Recording Speed......................................................8-2
Test D-VHS Status...................................................8-2
TRANSPORT CONTROLS...............................................8-2
STATUS DISPLAYS ........................................................8-2
Lockout Warnings....................................................8-3
SCHEDULING TO RECORD............................................8-3
CONTROLLING YOUR D-VHS VCR WITH YOUR
REMOTE CONTROL......................................................8-3
PROGRAMMING YOUR REMOTE CONTROL.........9-1
PROGRAMMING THE REMOTE CONTROL....................9-1
Programming Mode.................................................9-1
Code Scan................................................................9-1
Code Entry...............................................................9-1
USING THE REMOTE CONTROL ...................................9-4
Switching the Remote Control to Operate Additional
Digital Satellite Receiver.........................................9-4
Identifying Codes that Have Been Stored................9-4
Controlling Other Components Using the AUX Button
.................................................................................9-5

PAGE 1-1
Congratulations! You’ve selected one of the most advanced digital video and audio components
available today. You now have the capability to receive hundreds of channels of video programming
and CD-quality audio.
What You Should Do First
Your satellite system is both a sophisticated technical product and an easy-to-operate source of
entertainment. You should complete the following steps to achieve the greatest performance from your
system:
•Read this manual to familiarize yourself with the system.
•Install the digitalsatellite receiver.
•Installyour satellite dish antenna and cable.
•Align the satellite dish antenna.
•Arrange for programming from DIRECTV.
•Enjoy endless hours of TV entertainment.
How Does All This Work?
Many film studios, news organizations and other broadcasters (step 1) provide their video, audio, and
data services to the DIRECTV uplink center (step 2).
DIRECTV then digitally transmits the signals 22,300
miles into space to a grouping of high-powered
satellites (step 3) built by Hughes Electronics. These
satellites are located in geostationary orbit. This
means that after installation of the satellite system,
which includes aiming the satellite dish antenna at
the satellites, no adjustment will be necessary to
change channels because everything comes from the
same locations in the sky. The satellite dish antenna
never has to track the satellite, so there's no waiting
for the picture to come in. From the satellites the
digital signals are beamed back to earth where they
are received by your satellite dish antenna (step 4).
The signals then go into the digital satellite receiver
(step 5) where they undergo extensive processing to
determine if you are authorized to access them. The
signals are then reconverted into high-quality video
and audio that you can enjoy on your television. The
telephone connection (step 6) is used by the digital
satellite receiverto report back to DIRECTV (step 7)
any purchase activity.
A FIRST LOOK AT
THE SATELLITE
SYSTEM
1
The DIRECTV network

MITSUBISHI BRAND DIRECTV PLUS™ DIGITAL SATELLITE RECEIVER
PAGE 1-2
Satellite System Components
There are three main components of a satellite system. They are the satellite dish antenna, the
DIRECTV PLUSdigital satellite receiver, and the remote control. Take a few minutes to read about
each one.
The Satellite Dish Antenna
The satellite dish antenna is the component that receives the digital signals. It must be mounted to a
solid outdoor surface that allows a clear view of the southern sky.
The large dish-shaped part is known as the reflector. Your reflector
may be fairly round (18”) or oval shaped (18” high by 24” wide).
At the end of a tubular arm that is attached to the satellite dish
antenna, there is a low noise block (LNB) assembly. Satellite dish
antennas come in a variety of LNB configurations. Your assembly
may provide for receiving signals from multiple satellites and/or
distributing the signal to one or more satellite receivers.
The mounting bracket and base plate make adjustments easy during
installation. Once the satellite dish antenna has been properly
positioned to point toward the satellites, you should never need to
adjust it again.
Refer to the instructions in Chapter 4, “Installing the Satellite Dish
Antenna” or other satellite dish antenna installation instructions to
determine the type of antenna you have.
The Digital Satellite Receiver
This DIRECTV PLUSdigital satellite receiver is one of the most compact available today. The basic
features for setup, installation, and viewing programming can be accessed from the front panel keys.
Your access card is located behind the door on the right side of the digital satellite receiver. This
special card contains information about your level of service and holds pay per view purchase activity.
This card should not be removed except to protect the digital satellite receiverfrom unauthorized use
or to replace the card when DIRECTV supplies a new one.
The power key ( ) is used to turn the digital satellite receiveron and off. The power light will
illuminate when the unit is on. Any off-air signal, such as cable TV or local programming, connected
to the IN FROM ANT jack is passed through to the OUT TO TVjack when the digital satellite receiver
power is off.
The information key ( ) is used to display descriptions of satellite programs and channels on your
TV screen.
The satellite dish antenna parts. While your dish may
vary in appearance, the components are referred to
using the same names.
The front of the digital satellite receiver and Access Card.

A FIRST LOOK AT THE SATELLITE SYSTEM
PAGE 1-3
At any time, pressing the program guide key ( ) will initiate the display of the on-screen guide,
where you can see a listing of all available programs, or will display the GUIDE MENU if pressed
while displaying a program guide.
The four directional keys, up ( ), down ( ), left ( ), and right ( ), are used to move the highlight
around the program guide and menus. They also provide access to the OneLine™ Guide when menus
aren’t displayed.
The select key ( ) is used to access a highlighted guide or menu item.
The rear of the digital satellite receiver has numerous jacks for connection to your audio/video
entertainment system. You will also find the power cord permanently connected to the back.
The SATELLITE IN F-type jack is for connecting the cable from your satellite dish antenna to the digital
satellite receiver. Be sure that you use RG-6 cable only.
The IN FROM ANT F-type jack is an input where you can connect the cable from an RF terrestrial
source such as an off-air antenna or cable TV service.
The OUT TO TVF-type jack is an RF output which you may connect to your TV or VCR (depending
on your entertainment system). Note that the CH3/CH4switch on the upper left enables you to select
the channel that digital satellite receiver signals will appear on. Set you TV to match this.
The phono-type AUDIO output jacks, labeled and color coded (Lis white, Ris red) to indicate left and
right, can be used for connection to your TV, VCR, or audio system. The phono-type composite
VIDEO output jack is color-coded yellow. You may use this jack for connection to your TV or VCR.
The multiple-pin S-VIDEO jack is for high-quality video output. Use this jack to achieve the clearest
picture for your TV or VCR. Many newer TVs, SVHS VCRs, Hi8 VCRs and some AV Receivers
support S-video connections.
The VCR CONTROL mini-jack is for connecting the VCR control cable included with the system.
With this cable, the digital satellite receiver can interface with most popular brands of VCRs to record
selected programs automatically.
The D-VHS jack is for connecting a digital A/V cable for use with some D-VHS digital VCRs. When
connected to a D-VHS VCR, the additional D-VHS features described in this manual become active
and the standardVCR CONTROL mini-jack is disabled.
There are two DIGITAL AUDIO OUT connectors. One isOPTICAL and the other isCOAX. They
both provide the same signals for connection to a Dolby Digital decoder.
The RF REMOTE jack is provided for future accessory use.
The LOW SPEED DATAport is for connection to other data devices. See your dealer regarding any
options that may be available. Use of this port without the proper cable or equipment could damage the
digital satellite receiver and/or connected devices.
The rear of the digital satellitereceiver.

MITSUBISHI BRAND DIRECTV PLUS™ DIGITAL SATELLITE RECEIVER
PAGE 1-4
The standard RJ-11 modular PHONE JACK is for connecting the digitalsatellite receiverto your
phone line. This phone connection is necessary to access certain program offerings. Calls generated by
the digital satellite receiverare toll free. The telephone line connection will not normally interfere with
your telephone operation.
The Remote Control
The remote control can control your digital satellite receiver and most TV brands, as well as VCRs and
many other auxiliary devices such as cable boxes, amplifiers, and laser disc players.
The remote control uses an invisible infrared light to send signals to your components when you press
the keys. You must aim the remote control toward the component for it to receive the command.
The mode keys across the top of the remote control enable you to specify the device you intend to
control. This is important since many devices share the same keys, such as the key and
the numeric keys. You must press the appropriate device key before pressing a command
key to make sure the remote control sends the right signal to the right device. The only
keys that deviate from the rule are the blue keys, as they are always associated with the digital
satellite receiver.
Four directional keys will cause the on-screen highlight to move in the direction you want.
The keys will be referred to as , , , and .
The select key ( ) is one of the most important keys. Pressing the key will tell the
digital satellite receiver that you wish to choose the highlighted item.
The arch of keys below the power and mode keys control frequently used functions. These
include special action ( ), information ( ), guide ( ), exit ( ), and
favorite ( ) keys.
The key is unique because it does nothing by itself. Pressing it displays the action icon
in the upper left corner of your screen for a few seconds. During that time, other keys may be
pressed to access special functions indicated in yellow above the keys. Each will be described
later in this manual.
The following chart describes the key functions for easy reference:
Keys Label Feature
MENU Displays the MAIN MENU from any screen
LIST Displays the CHANNEL LISTS screen
SERVICES Displays the Alternate Services menu
MOVIES Filters the on-screen guide to movies only
SPORTS Filters the on-screen guide to sports only
NEWS Filters the on-screen guide to news only
ALL Resets the on-screen guide filters
The remaining keys are digital satellite receiver-specific keys and common device keys including
numbers, channel up and down, etc. The functions of these keys change depending on the device
currently selected. Please refer to “Controlling the Digital Satellite Receiver” for more remote control
capabilities and “Programming Your Remote Control” for setting your remote control to handle other
audio/video components. Descriptions and details of each individual key will be given in the
appropriate sections throughout this manual.
The remote control

PAGE 2-1
It is recommended that you have your satellite system professionally installed. This is due to safety
issues, electrical codes, and assurance of a quality installation. If you should choose to perform the
installation yourself, please pay special attention to the precautions in the front of this manual
and refer to the chapter “Installing and Pointing Your Satellite Dish Antenna." You may also
want to obtain the Do-It-Yourself Installation Kit, sold separately.
This chapter provides step-by-step instructions for setting up your satellite system and connecting it to
your television or entertainment system.
The carton includes the DIRECTV PLUSdigital satellite receiver itself, an access card (already
installed in the digital satellite receiver behind the door), a remote control (batteries included), cables,
and documentation. Contact your dealer if anything is missing or damaged. Please save all packing
materials until the installation of your system is complete in case anything needs to be returned.
You now need to decide where you want to place the digital satellite receiver. Choose a location near
your TV where the power cord or cables will not be inadvertently disconnected. The location should
also be well ventilated. Do not set electronic components or other objects (including this manual) on
top of the digital satellite receiver or otherwise block its cooling vents.
Installing Remote Control
Batteries
Before the remote control can be used, the two supplied (“AAA”) batteries need to be installed. First,
unsnap the battery cover from the back of the remote control. Install
each fresh battery as shown, making sure that the + and - on each
battery line up with the marks in the battery compartment. Next,
snap the cover back onto the remote control.
Refer to “Programming Your Remote Control” for setting the codes
to control the devices in your entertainment system.
SETTING UP YOUR
SATELLITE
SYSTEM
2
Battery installation

MITSUBISHI BRAND DIRECTV PLUS™ DIGITAL SATELLITE RECEIVER
PAGE 2-2
Choosing the Best Connection for
Your Entertainment System
There are a number of ways to connect the DIRECTV PLUSdigital satellite receiver, depending on
the other audio/video equipment you wish to use. The simplest hookups are described in the following
sections.
Before connecting the digital satellite receiver to your entertainment system, you should connect the
phone line. This can be done by plugging one end of the provided telephone cable into
the PHONE LINE jack on the back of the digital satellite receiver and the other end
into a telephone wall jack. If you do not have a telephone jack within reach, you may
have a new one installed or reorient the digital satellite receiverto be within reach of a
telephone wall jack.
You may need to purchase additional connectors and/or cables to suit specific needs from your dealer
or electronic hardware stores. Choose which hookup method to use based on:
•The capabilities of your TV and VCR.
•Your desire to pass local programming through the digital satellite receiver.
•Any other devices you want to include in the system (stereo, second VCR, etc.).
Before attempting to connect anything, position yourself so you are looking at the back of your
components. Note the various input and output receptacles, their shapes, and how they are labeled.
Then read through the rest of this hookup section before going ahead with actual hookup.
Do not turn on the power yet. For your safety, make sure the digital satellite receiver, TV, VCR, and
any other devices to be connected are unplugged from the wall outlet while hooking them up.
Hook Up the Audio/S-video Signals
Many newer TVs, VCRs and some AV Receivers have S-video inputs. VCRs that support S-video
include Hi8 and SVHS types. Look on the back of your TV and VCR for this special
jack. It will probably be labeledS-VIDEO IN. If you are unsure, you can see the type
of connector that you are looking for on the back of the digital satellite receiver. If
neither the TV nor VCR has this jack, proceed to the “Hook Up the Audio/Video
Signals” section.
This hookup will give you the sharpest picture of any of the hookups. Also, this hookup will allow you
to view DIRECTVprogramming and local terrestrial broadcast simultaneously on TVs with “picture
in picture” (PIP) feature.
The rear of the digital satellite receiver
The Phone line and jack
The S-video cable and jack

SETTING UP YOUR SATELLITE SYSTEM
PAGE 2-3
When using this hookup, you cannot use the digital satellite receiver as a switch to choose between
satellite programming and local terrestrial broadcasts. Instead, you will use the input selection that
your TV and/or VCR offers to select the source.
If your VCR has S-video input…
use an S-video cable to connect the digital satellite receiver’sS-VIDEO output to the S-video input on
your VCR. Also connect one pair of the digital satellite receiver’s audio outputs (Left and Right) to the
audio inputs on your VCR.
If your TV has S-video input…
connect an S-video cable from the S-VIDEO output (either from the digital satellite receiver if
available or the VCR) to the S-video input on the TV. Also connect the left and right audio outputs
from the same device that the S-video is coming from and connect them to the TV.
If you have a stereo system…
you may be able to achieve big speaker sound. See the “Hook Up to a Stereo System” section for the
necessary connections.
If your hookup is complete…
move on to the “Finishing Up” section.
Hook Up the Audio/Video Signals
Most high-end TVs and VCRs have phono-type audio and video inputs. Look at the back of your TV
and VCR for three jacks—possibly color coded yellow, white and red. They will
be labeled something like IN (Land R), AUDIO IN, and VIDEO IN. If you are
unsure, look at these connectors on the back of the digital satellite receiver. If
you have no jacks like these on your TV or VCR, skip this section and proceed
to the “Hook Up the RF Signals” section.
This video hookup will give you a clearer picture than an RF hookup. Also, this hookup will allow you
to view satellite programming and local broadcast simultaneously on TVs that offer a “picture in
picture” (PIP) feature.
When using this hookup, you cannot use the digital satellite receiver as a switch to choose between
satellite programming and local broadcasts. Instead, you will use the input selection that your TV
and/or VCR offer to select the source.
If your VCR has a video input…
use an audio/video cable to connect the digital satellite receiver’sVIDEO output to the video input on
your VCR. Also connect the pair of the digital satellite receiver’s audio outputs (Left and Right) to the
audio inputs on your VCR.
If your TV has a video input…
connect an audio/video cable from the VIDEO output (from either the digital satellite receiver, if
available, or the VCR) to the video input on the TV. Also, connect the left and right audio outputs from
the same device that the video is coming from and connect them to the TV.
If you have a stereo system…
you may be able to achieve big speaker sound. See the “Hook Up to a Stereo System” section for the
necessary connections.
If your hookup is complete…
move on to the “Finishing Up” section.
Hook Up the RF Signals
If your TV instructions show special “Cable Box” connections that differ from the instructions below,
you should use those instructions with the digital satellite receiver.
The phono-type video cable and jack
The RF cable and jack

MITSUBISHI BRAND DIRECTV PLUS™ DIGITAL SATELLITE RECEIVER
PAGE 2-4
Look at the back of your TV and VCR for RF inputs. These may be labeled 75-OHM, 300-OHM,
CABLE, FROM ANTENNA, VHF or UHF. These could appear either as a pair of screws or an F-type
connector as on the back of the digital satellite receiver.
If your TV or VCR does not have threaded F-type connectors you will need to obtain adapters which
convert the round F-type RG-6 or RG-59 cable to the connectors on your TV and/or VCR. These are
sold separately and should be available from your dealer or an electronics hardware store.
Note: The RF connector OUT TO TVfrom the digital satellite receiver does not provide stereo
sound to your TV or VCR.
To connect your VCR…
use a coaxial cable to connect the OUT TO TVfrom the digital satellite receiver to the RF input section
on your VCR. This is the first place where an adapter may be needed if your VCR doesn’t have the F-
type connector.
To connect your TV…
connect a coaxial cable from the RF output (from either the digital satellite receiver’sOUT TO TV, if
available, or the VCR) to the RF input on the TV. This is the other place where an adapter may be
needed if your TV doesn’t have the F-type connector.
Set the channel 3/4 selector switch on the back of the digital satellite receiver to the channel that is not
broadcast or has the weakest signal in your area. This will be the channel that you need to set your TV
and/or VCR to for viewing or recording satellite programming.
You can also use the digital satellite receiver as a switch to select between satellite programming and
local broadcasts. This can be accomplished by pressing the key on the remote control while the
remote is in SAT mode. Also, you must connect your local signal, either from an antenna or cable
service, to the IN FROM ANT on the back of the digital satellite receiver. If your antenna wire is not a
coaxial type you will need an adapter as described earlier.
If you have a stereo system…
you may be able to achieve big speaker sound. See the “Hook Up to a Stereo System” section for the
necessary connections.
If your hookup is complete…
move on to the “Finishing Up” section.
Hook Up to a Stereo System
To achieve high-quality sound from the digital satellite receiver through a stereo system, simply
connect the AUDIO outputs (Left and Right) to an available input on your audio
system. First, look for an input labeled AUX. If you aren’t using a compact disc
player or laser disc player, you can use one of those inputs, if available. The only
input that you should not use is one that is specified for a turntable/phonograph.
The following applications require that your audio system is equipped with
coaxial or optical digital inputs. Not all stereo equipment provides this type of
input.
For two-channel digital stereo, connect one of the DIGITAL AUDIO OUT connectors. These are
labeled OPTICAL and COAX. Before using the OPTICAL connector, you must remove the protective
cover. Save this cover in case you ever need to transport your digital satellite receiver.
Warning: Before using the DIGITAL AUDIO OUTconnectors with a standard PCM digital
bitstream decoder/receiver, set the Dolby Digital option to “Off” on the Advanced Preferences
screen in the digital satellite receiver’s menus. Failure to do this could result in a high level noise
and could be harmful to your ears and equipment.
The phono-type audio cable and jack

SETTING UP YOUR SATELLITE SYSTEM
PAGE 2-5
The best quality sound can be achieved through the use of a 6-channel amplifier equipped with a
Dolby Digital (AC-3) decoder or Dolby Digital (AC-3) processor. Unlike analog Dolby Surround with
its single band-limited surround channel (usually played over two speakers), Dolby Digital features
two completely independent surround channels, each offering the same full-range fidelity as the three
front channels. As a result, true stereo surround effects can be achieved for an expanded sense of
depth, localization, and overall realism.
Distributing the Video Signal to Distant Rooms
There are several ways to distribute the digital satellite receiver's video to another room or throughout
your home. The most direct way to achieve this is by running a cable from the OUT TO TVon the
digital satellite receiver to the desired distant locations. Be aware that running this cable for very long
distances or splitting the cable to multiple rooms will reduce the quality of the video and audio signal.
In this case, you should use amplified splitters.
Other distribution systems are available. Some of these even offer distribution without additional
wiring. Ask your dealer for advice as to what might best suit your needs.
Finishing Up
You can mix and match the different hookups described above to suit your entertainment system’s
available connections. For example, you could connect the VCR using audio/video, while the TV is
connected with the RF signal. Always try to achieve the highest quality and greatest flexibility
available.
Once all connections have been completed, plug in the TV, VCR and digital satellite receiver to the
wall outlet, appropriate extension cord, or surge protector. See Important Safety Instructionsdescribed
in the front of this manual.
Note: If you have connected a VCR into your entertainment system in a way that routes the cables
from the digital satellite receiver to your VCR before the signal reaches the TV, you may experience
a distorted picture if you attempt to record a copy-protected program. These programs are identified
by a “Can’t Tape” symbol in the banner area of the screen. If this occurs, simply stop the recording
process and your picture will automatically correct itself.
The Dolby Digital (AC-3) environment
Multichannel
stereo with Dolby
Digital decoding
Digital satellite
receiverwith
Dolby Digital
(AC-3) output
SUB

MITSUBISHI BRAND DIRECTV PLUS™ DIGITAL SATELLITE RECEIVER
PAGE 2-6
Connecting the VCR Control Cable
With the proper connections you can have the digital satellite receiver control your VCR for
unattended recording. First, plug the VCR Control cable into the back of the digital
satellite receiver. Then proceed to the next section to determine where the other
end of the cable should be attached.
Finding the VCR’s Remote Control Sensor
So that the digital satellite receiver can control your VCR, the emitter end of the VCR control cable
must be attached where the VCR’s remote control sensor is located.
This is labeled on some VCRs. You may also find a diagram in your
VCR manual indicating the sensor position. It is commonly
identifiable by a small dark plastic window. For reference, see the
sensor on the digital satellite receiver located in the center.
If the sensor is not labeled or documented, you will need to scan the
front of your VCR with your VCR remote control. Use the following
procedure to accomplish this:
•Hold the VCR remote control about ½-inch from the front left
side of your VCR.
•Slowly move the remote control to the right repeatedly pressing
the remote control’s power key on and off.
•Once your VCR responds to your pressing the remote control
power, note the position. This should be the location of your
VCR IR sensor.
Once the sensor position has been determined, temporarily attach the emitter to the area with a piece of
tape until the system can be tested. Refer to the “VCR Setup” section in the chapter “The Digital
Satellite Receiver’s Menu System” to program and test the VCR Control feature.
Upon verifying that the VCR control is functioning properly you can remove the tape and permanently
attach the emitter using the peel-and-stick backing. This attachment should not interfere with normal
VCR operation.
Remote Control Extender
Your receiver includes a Remote Control Extender. With the Remote Control Extender, you can have
complete control of your digital satellite receiver and other entertainment system components from
anywhere inside of the house. It converts IR (Infra-Red) signals emitted by the remote control into a
powerful radio signal which is then broadcast up to a distance of 150 feet to the receiver base station.
No tools are needed to install the Remote Extender.
The Remote Control Extender consists of two components; the transmitter “nose cone” (which attaches
to the front of the remote control), and the receiver “base station” (which is placed in the room where
the digital satellite receiver is located).
The VCR Control cable and jack
Look for indications of the remote control sensor
Scanning for the remote control sensor

SETTING UP YOUR SATELLITE SYSTEM
PAGE 2-7
Receiver Base Station Installation
Place the receiver base station in the room where your digital satellite receiver is located. Choose a
location that is near an electrical outlet on an opposing wall
to where your equipment is installed. Point the front of the
base station towards the receiver. Try to use your remote
control from your chosen location to confirm that it is within
the operating “view” of your digital satellite receiver.
Plug the AC power adapter (included with your Remote
Control Extender) in the wall outlet. Attach the small plug
from the transformer into the jack on the receiver base
station. The power light on the receiver base station will
illuminate when a transmission is received. Extend the
antenna fully. The Remote Control Extender base station is
ready for use.
With the proper connection, you can hide the receiver base station behind your entertainment system
and still control your digital satellite receiver. First, plug the control cable into the side of the receiver
base station. The emitter end of the control cable must then be attached to the front of the satellite
receiver to communicate with the remote control sensor. It is suggested that you attach the emitter on
the lower front left corner of the digital satellite receiver. You may have to try different locations for
optimum performance. You can permanently attach the emitter using the peel-and-stick backing. This
attachment should not interfere with normal operation. While the remote
Transmitter Nose Cone Installation
The Remote Control Extender nose cone has been designed to attach to the front of your Mitsubishi
satellite remote control. Firmly press the nose cone onto
the front of the remote control until it will be held in place
by the bumps on the bottom.
Before the nose cone transmitter can function you will
need to install the supplied battery. To do this, begin by
simply opening the small door on the bottom of the nose
cone. Install the provided “mn21, 12v” battery noting the
proper polarity (+/-). Then replace the door.
You are now ready to use your Remote Control Extender
equipped remote control. You should find that using your
remote control from another room will work just as though
you were right in front of your digital satellite receiver and
other entertainment equipment. Note that you do not need
to point it towards the room for it to work. The signals are broadcast from the nose cone in all
directions — even through floors, walls, ceilings and furniture!
Battery Replacement
Your operating range will start to decrease as the battery life decreases. Replacement batteries are
conveniently available at most electronic stores. To replace the battery, follow the directions above.
Remember to dispose of the old battery properly. Use battery type “mn21, 12v” or equivalent.
Base station placement
Attach the emitter where the rectangle appears in this picture. The remote control sensor (indicated with an oval) will detect the signals.
Attach the nose cone

MITSUBISHI BRAND DIRECTV PLUS™ DIGITAL SATELLITE RECEIVER
PAGE 2-8
Setting the Address of your Digital Satellite Receiver
and Remote Control
To avoid interference between your remote control and your neighbors that may have the same model
remote control, you should change the address of your components. This is similar to choosing a
channel on a cordless phone so that you and your neighbors don't hear each others' conversations.
See the chapter, "Programming Your Remote Control" for the instructions to accomplish this.
Now You Can Turn It On
Once you have connected everything, you can begin powering up the components. Turn the TV on and
set it to the digital satellite receiver’s output channel (3 or 4) or input (video or S-video). Do the same
for the VCR, if applicable. Now turn the digital satellite receiver on. You will see the start-up screen
for several seconds, followed by a black screen with the message at the bottom:
“Searching for satellite signal. To access related utilities, press .”
If so, this is good! If not, try pressing the key while the remote control is in SAT mode. If that
doesn’t work, check all of the connections.
You’re well on your way to enjoying your satellite system.