1.2.2 Use E-mail
1. Email office file to yourself, and receive email by your iPhone and
iPad
2. Click on the email attachment (Figure.2)
3. Click on the “Open in…”button, and select WiFi-Doc (Figure.3)
4. Select a MirrorOp or WPS compatible receive devices, and start
the show
2.1 Using WiFi-Doc with iOS
A. Enable the WiFi and connect to the Access Point where the
WiFi-Doc compatible device connected.
B. Select “WiFi-Doc”icon to launch the client software.
C. WiFi-Doc client will start to search for WiFi-Doc compatible
devices automatically.(Figure.4)
D. Choose a WiFi-Doc device, if login code is enabled, it will popup
the login page. Enter the login code and press login. If there is no
login code, it will login device directly (Figure.5)
E. If “No receiver found”, please check if your Wireless has
connected to Projector correctly, or you can choose “Manual Input
IP”to enter IP address manually.