Mixtile Edge 2 User manual

Edge 2 | Single Board Computer
Edge 2 Kit | IoT Edge Computer
User Manual
Get Started with
https://www.mixtile.com/docs/

Edge 2 – User Manual MIXTILE
- 2 -
V1.3 Copyright ©2022 MIXTILE.
Changes
Version
Date
Changes
Name
1.0
2021-08-23
First version
VT
1.1
2021-11-12
Add key component specification
VT
1.2
2022-03-14
Add content related to Edge2 Kit
CR
1.3
2022-04-24
Update information of M.2 and Mini-PCIe
CR

Edge 2 – User Manual MIXTILE
- 3 -
V1.3 Copyright ©2022 MIXTILE.
Index of Contents
CHANGES ............................................................................................................................................................................................. - 2 -
1 INTRODUCTION ....................................................................................................................................................................... - 5 -
1.1 PRODUCT DESCRIPTION ...............................................................................................................................................................................- 5 -
1.2 PACKAGE LIST ................................................................................................................................................................................................- 5 -
1.3 MAIN FEATURES ............................................................................................................................................................................................- 5 -
1.4 BLOCK DIAGRAM & PRODUCT OVERVIEW ................................................................................................................................................. - 6 -
1.4.1 Block Diagram ................................................................................................................................................................................- 6 -
1.4.2 Product Overview ......................................................................................................................................................................... - 7 -
1.4.3 Physical Dimensions.....................................................................................................................................................................- 8 -
1.5 KEY COMPONENT SPECIFICATIONS .............................................................................................................................................................- 9 -
1.5.1 MIXTILE Core 3568 .......................................................................................................................................................................- 9 -
1.5.2 Wi-Fi 6 / Bluetooth ...................................................................................................................................................................... - 9 -
1.5.3 MicroSD Socket ...........................................................................................................................................................................- 10 -
1.5.4 M.2 Socket.................................................................................................................................................................................... - 10 -
1.5.5 Mini-PCIe Socket ........................................................................................................................................................................- 10 -
1.5.6 Gigabit Ethernet ..........................................................................................................................................................................- 11 -
1.5.7 Power Input .................................................................................................................................................................................. - 11 -
1.5.8 USB 2.0/3.0 Host Ports ............................................................................................................................................................. - 11 -
1.5.9 RS485 ..............................................................................................................................................................................................- 11 -
1.5.10 Display Support ...........................................................................................................................................................................- 11 -
1.5.11 U.2 Connector............................................................................................................................................................................. - 12 -
1.5.12 Buttons & LEDs ........................................................................................................................................................................... - 12 -
2 CONNECTORS & PIN ASSIGNMENTS .............................................................................................................................. - 13 -
2.1 DEBUG ......................................................................................................................................................................................................... - 13 -
2.2 UART .......................................................................................................................................................................................................... - 13 -
2.3 CAN-IO..................................................................................................................................................................................................... - 13 -
2.4 I2C ...............................................................................................................................................................................................................- 14 -
2.5 5V OUTPUT................................................................................................................................................................................................ - 14 -
2.6 POWER BUTTON CONNECTOR .................................................................................................................................................................. - 14 -
2.7 RESET BUTTON CONNECTOR .....................................................................................................................................................................- 14 -
2.8 SPDIF..........................................................................................................................................................................................................- 14 -
2.9 RS485.........................................................................................................................................................................................................- 15 -
2.10 ADC.......................................................................................................................................................................................................- 15 -
2.11 SPEAKER .................................................................................................................................................................................................- 15 -
2.12 DMIC .....................................................................................................................................................................................................- 15 -
2.13 MIPI-DSI0 ........................................................................................................................................................................................... - 16 -
2.14 MIPI-DSI1 ........................................................................................................................................................................................... - 16 -
2.15 EDP........................................................................................................................................................................................................ - 17 -
2.16 CAMERA .................................................................................................................................................................................................- 18 -
2.17 M.2 ........................................................................................................................................................................................................ - 19 -
2.18 MINI-PCIE............................................................................................................................................................................................ - 21 -

Edge 2 – User Manual MIXTILE
- 4 -
V1.3 Copyright ©2022 MIXTILE.
2.19 U.2 ......................................................................................................................................................................................................... - 22 -
2.20 SATA POWER .......................................................................................................................................................................................- 24 -
3 SPECIFICATIONS .................................................................................................................................................................... - 24 -
3.1 ENVIRONMENTAL ........................................................................................................................................................................................- 24 -
3.2 MECHANICAL .............................................................................................................................................................................................. - 24 -
4 SUPPORT ..................................................................................................................................................................................- 25 -
4.1 TECHNICAL SUPPORT .................................................................................................................................................................................- 25 -

Edge 2 – User Manual MIXTILE
- 5 -
V1.3 Copyright ©2022 MIXTILE.
1 Introduction
1.1 Product Description
Edge 2 is a high-performance and rich-interface ARM64 single-board computer targeted for a wide
range of IoT networking and computing applications. It may apply in networking, computing,
controlling, and home entertainment areas for further achievement with the help of multipurpose
software. The single-board computer combines a MIXTILE System-on-Module Core 3568, a
WLAN+BT wireless module, and plenty of expansion interfaces.
Edge 2 Kit is based on Edge 2, just adds one customizable enclousure and two external Wi-Fi
antennas.
1.2 Package list
1x MIXTILE Edge 2
1x 1m type-c to type-c cable
2x 16mm 6dbi 2.4G/5.8G Antennas (Only Included in Edge 2 Kit)
1.3 Main Features
Quad-core Cortex-A55 SoC Processor RK3568 up to 2.0GHz
2/4GBytes LPDDR4 SDRAM Memory
16/32GBytes eMMC Flash Memory
1 Tops NPU
Wi-Fi 6 802.11ax
Dual-Mode Bluetooth 5.0
Support 4G/5G/LoRa/Zigbee module
1x Gigabit Ethernet Port
1x MicroSD 3.0 Flash Expansion Socket
3x USB 2.0/3.0 ports up to 5Gbps
1x M.2 Socket: PCIe 3.0, USB 3.0, SIM Socket
1x Mini-PCIe Socket: USB2.0, SIM Socket
1 x U.2 Socket: SATA/PCIe, SATA, RGMII/SPI/I2S, USB2.0
1x HDMI2.0, 1x eDP, 2x MIPI-DSI, and 1x MIPI-CSI
4KP60 H.265/H.264/VP9 video decoder
1080P100 H.264/H.265 video encoder
1x RS485, 1x CAN, 1x I2C, and 2x UART
3x PDM, 1x SPDIF, 1x Speaker, 1x IR, and 4x ADC
Real Time Clock with Battery Backup
2x power supply ports:
Type-C PD3.0 Power input (Max 3A @ 20V)
12V DC/SATA Power input (Max 3A)
Android 11 Board Support Package
0 to +80°C Operating Temperature

Edge 2 – User Manual MIXTILE
- 6 -
V1.3 Copyright ©2022 MIXTILE.
1.4 Block diagram & Product overview
1.4.1 Block Diagram
The Block diagram for the Edge 2 single-board computer is shown below with descriptions for each
function.

Edge 2 – User Manual MIXTILE
- 7 -
V1.3 Copyright ©2022 MIXTILE.
1.4.2 Product Overview

Edge 2 – User Manual MIXTILE
- 8 -
V1.3 Copyright ©2022 MIXTILE.
1.4.3 Physical Dimensions

Edge 2 – User Manual MIXTILE
- 9 -
V1.3 Copyright ©2022 MIXTILE.
1.5 Key Component Specifications
The key component specifications are described below with relevant hardware information and
developing notices. For more information, pin assignments and signal descriptions are listed in
Chapter 2, Connectors & Pin Assignments.
1.5.1 MIXTILE Core 3568
The Core 3568 is a System-on-Module that expands all CPU functions to pins with an innovative
connector. The Rockchip RK3568 ARM64 CPU contains many peripherals to support multi-purpose.
Quad Cortex-A55 processing cores
Core operating frequencies up to 2.0GHz
Neural Process Unit with processing performance up to 0.8 TOPS
Support 4k@60fps H.265/H.264/VP9 decoder; 1080P@100fps H.265/H.264 encoder
LPDDR4 SDRAM supports up to 8GB
The SDRAM is 32bits data width, 4 ranks LPDDR4 memory capacities from 2GBytes to 8GBytes. The
system flash memory supports eMMC 5.1 memory capacities from 16GBytes to 256GBytes. The
default memory setting is 2/4GBytes LPDDR4 and 16/32GBytes eMMC for Edge 2.
1.5.2 Wi-Fi 6 / Bluetooth
Edge 2 integrates a Wi-Fi and Bluetooth module AP6275S, that can wake up the device from sleep
mode. AP6275S supports Wi-Fi 6 and dual-mode Bluetooth 5.0 that could interact with different
vendors’ 802.11a/b/g/n/ac/ax 2x2 Access Points with MIMO standard and can accomplish up to a
speed of 1200Mbps with the dual stream. Wi-Fi wake and enable signals connect to GPIO0 in the
processor, which can be operating while the device is sleep.
WiFi-BT Module Architecture

Edge 2 – User Manual MIXTILE
- 10 -
V1.3 Copyright ©2022 MIXTILE.
1.5.3 MicroSD Socket
The MicroSD socket accepts standard 11mm x 15mm Micro-SD cards with capacities up to 64GBytes.
The 4bits data interface supports the SDMMC3.0 protocol. The default boot setting is the eMMC
Flash which can change to the MicroSD card.
1.5.4 M.2 Socket
M.2, Next Generation Form Factor (NGFF), is specified for expansion modules. The M.2 interface
uses a standard 75 pins B key socket, which supports USB3.0-based WWAN modules, PCIe-based
WWAN modules, and PCIe-based SSD modules. The M.2 socket supports the module sizes of 2242,
3042, and 3052.
The module supporting configuration, including power, reset, and interrupt signals, is under
software control by Core 3568. Since each module needs specific configuration definitions, check
the configuration setting before connecting the module.
SIM Support
The M.2 socket includes a SIM socket with the SIM_M.2 mark, which supports 12mm x 15mm
micro-SIM cards for 4G/5G cellular function. This socket does not support dual SIM.
USB Support
The M.2 socket supports one standard USB 3.0 interface. Since the USB 3.0 data signals and one
lane of PCIe data signals are using the same set of pins, a GPIO is used to select USB 3.0 and a
lane of two-lane PCIe 3.0 signal.
PCIe Support
The M.2 socket supports a two-lane PCIe 3.0 interface. Edge 2 uses PI6C557-03BLE as a clock
generator to provide a 100MHz clock signal for the CPU and M.2 socket. For full functioning of
the two-lane PCIe signal, the selecting GPIO, PCIE_USB_SEL_GPIO1_D0 , needs to set LOW to
active.
1.5.5 Mini-PCIe Socket
The mini-PCIe is a small form factor PCI card interface, which uses a standard 52 pins mini-PCIe
socket. It contains a USB 2.0 interface with a supported SIM signal. The mini-PCIe socket supports
the module sizes of 3052.
The module supporting configuration, including power, reset, and interrupt signals, is under
software control by Core 3568. Since each module needs specific configuration definitions, check
the configuration setting before connecting the module.
SIM Support
The mini-PCIe socket includes a SIM socket with SIM_Mini mark, which supports 12mm x 15mm
micro-SIM cards for 4G cellular function. This socket does not support dual SIM.
USB Support
The mini-PCIe socket supports a standard USB 2.0 interface.

Edge 2 – User Manual MIXTILE
- 11 -
V1.3 Copyright ©2022 MIXTILE.
1.5.6 Gigabit Ethernet
The IEEE802.3 compliant ethernet supports 10/100/1000Mb half-duplex and full-duplex
auto-negotiation. The GbE communicates to an external PHY, RTL8211F-CG, through an RGMII
interface from the processor. The RJ45 connector contains status and speed lights. The green light
is on for connected and flashing for data transmitting. The yellow light is on for 1000Mbps and off
for 10/100Mbps.
1.5.7 Power Input
Power Delivery (PD)
The power port uses a USB-C port, which supports USB PD 3.0 . An on-board Power Delivery
controller allows the maximum power input of 20V @ 3A. The Edge 2, as device mode, can be
communicated by USB-C, which supports USB 2.0 for ADB debugging, firmware update.
12V DC
DC power inputs from a DC power jack socket or a SATA power socket require 12V @ 3A.
1.5.8 USB 2.0/3.0 Host Ports
Edge 2 has three standard USB 2.0/3.0 host ports using type-A connectors and one USB 2.0/3.0 port
connects M.2 socket. These USB 2.0/3.0 ports are provided by a USB 3.0 hub, VL817. The three
type-A connectors support 5V at 1A power and dependent software power dis/enabling.
1.5.9 RS485
RS485 connector has three pins, pin A, B, and GND for communication. RS485 connects to UART4 in
CPU via interface IC, SP485REN-L. RS485 is a half-duplex bus with a default setting on receiving
state. It will automatically switch to the sending state when needed. RS485 uses full isolation
designs, the power supply and ground are isolated from the module used in the board, and the
signal is isolated by an optocoupler.
1.5.10 Display Support
The video output processor supports the resolution from 1920x1080@60Hz to 4096x2304@60Hz
and three simultaneous displays in the following interfaces. The default main display is HDMI.
HDMI
HDMI display compliant HDMI 1.4 and HDMI 2.0. It supports up to 1920x1080@120Hz and
4096x2304@60Hz resolution.
eDP
The eDP display supports up to 2560x1600@60Hz resolution, up to 4 lanes of 2.7Gbps/lane. The
30-pin FPC connector includes the eDP interface and a backlight source. The pin assignments
are listed in the next chapter.

Edge 2 – User Manual MIXTILE
- 12 -
V1.3 Copyright ©2022 MIXTILE.
MIPI-DSI
The MIPI-DSI display supports two channel DSI and 2.5Gbps maximum data rate per lane. It
supports up to 1920x1080@60Hz display output for single-MIPI mode and 2560x1440@60Hz
for dual-MIPI mode. Two MIPI-DIS interfaces use 30-pin FPC connectors, MIPI-DSI0 and
MIPI-DSI1 , which include one channel MIPI-DSI and one touch panel signal (TP).
The connectivity is shown in the following figure:
MIPI-DSI Architecture
1.5.11 U.2 Connector
The U.2 interface uses a 68-pin U.2 connector including a standard SATA signal, which supports 5V
at 3A maximum, a SATA 3.0/PCIe 2.0 signal, a USB 2.0 signal, and another set of RGMII for
ethernet.
1.5.12 Buttons & LEDs
The POWER button controls three statuses of the device, on, off, and sleep. Short press POWER
button to turn on device when the device is off, press and hold POWER button to turn off device.
Short press POWER button to enter sleep mode when the device is on. Short press RESET button to
reset the device. When the device is on, press the RECOVERY button and hold, it will restart and
restore the factory settings.
The MASKROM button is for development only, hold the MASKROM button and power up (or reset).
The system will enter MaskROM mode for firmware development.
The power and system LEDs indicate the statuses of the power supply and system operating. And
two small LEDs on the front side of board indicate the network status of M.2 and mini-PCIe modules.

Edge 2 – User Manual MIXTILE
- 13 -
V1.3 Copyright ©2022 MIXTILE.
2 Connectors & Pin Assignments
The following section lists the interfaces connector pin assignments, pin types with corresponding
signal descriptions. The interface connectors on Edge 2 are listed in the table below.
2.1 Debug
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
UART2_RXD
IO
Input
UART2 serial data input for debug
2
UART2_TXD
IO
Output
UART2 serial data output for debug
3
GND
GND
-
Ground
2.2 UART
UART 3
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
3.3V
PWR
Output
3.3V @ 100mA Max
2
UART3_RX
IO
Input
UART3 serial data input
3
UART3_TX
IO
Output
UART3 serial data output
4
GND
GND
-
Ground
UART 5
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
3.3V
PWR
Output
3.3V @ 100mA Max
2
UART5_RX
IO
Input
UART5 serial data input
3
UART5_TX
IO
Output
UART5 serial data output
4
GND
GND
-
Ground
2.3 CAN-IO
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
5V
PWR
Output
5V @ 200mA Max
2
CAN1_RX
IO
Input
CAN receive data, connect to CAN transceiver
3
CAN1_TX
IO
Output
CAN transmit data, connect to CAN transceiver
4
GND
GND
-
Ground

Edge 2 – User Manual MIXTILE
- 14 -
V1.3 Copyright ©2022 MIXTILE.
2.4 I2C
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
3.3V
PWR
Output
3.3V @ 100mA Max
2
I2C3_SCL
IO
Output
I2C clock signal
3
I2C3_SDA
IO
I/O
I2C data signal
4
GND
GND
-
Ground
2.5 5V Output
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
5V
PWR
Output
5V @ 2A Max in total
2
5V
PWR
Output
5V @ 2A Max in total
3
GND
GND
-
Ground
4
GND
GND
-
Ground
2.6 Power button connector
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
PWRON_CON
IO
Input
Active-low, same as PWR button
2
GND
GND
-
Ground
2.7 Reset button connector
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
RESET_KEY
IO
Input
Active-low reset signal, same as RESET button
2
GND
GND
-
Ground
2.8 SPDIF
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
SPDIF_TX
IO
Output
SPDIF output signal
2
3.3V
PWR
Output
3.3V @ 100mA Max
3
GND
GND
-
Ground

Edge 2 – User Manual MIXTILE
- 15 -
V1.3 Copyright ©2022 MIXTILE.
2.9 RS485
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
GND
GND
-
Ground
2
485B
DS
I/O
RS485 differential signal Negative
3
485A
DS
I/O
RS485 differential signal Positive
2.10 ADC
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
3.3V
PWR
Output
3.3V @ 100mA Max
2
SARADC_VIN4
ANA
Input
ADC analog signal
3
SARADC_VIN5
ANA
Input
ADC analog signal
4
SARADC_VIN6
ANA
Input
ADC analog signal
5
SARADC_VIN7
ANA
Input
ADC analog signal
6
GND
GND
-
Ground
2.11 Speaker
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
SPK+
ANA
Output
speaker driver output Positive
2
SPK-
ANA
Output
speaker driver output Negative
2.12 DMIC
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
3.3V
PWR
Output
3.3V @ 500mA Max in total
2
3.3V
PWR
Output
3.3V @ 500mA Max in total
3
GND
GND
-
Ground
4
GND
GND
-
Ground
5
PDM_SDI1
IO
Input
PDM data signal
6
PDM_SDI2
IO
Input
PDM data signal
7
PDM_SDI3
IO
Input
PDM data signal
8
GND
GND
-
Ground
9
PDM_CLK1
IO
Output
PDM clock signal
10
GND
GND
-
Ground

Edge 2 – User Manual MIXTILE
- 16 -
V1.3 Copyright ©2022 MIXTILE.
2.13 MIPI-DSI0
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
GND
GND
-
Ground
2
MIPI_DSI_TX0_D0N
LVDS
Output
MIPI-DSI0 data signal Negative
3
MIPI_DSI_TX0_D0P
LVDS
Output
MIPI-DSI0 data signal Positive
4
GND
GND
-
Ground
5
MIPI_DSI_TX0_D1N
LVDS
Output
MIPI-DSI0 data signal Negative
6
MIPI_DSI_TX0_D1P
LVDS
Output
MIPI-DSI0 data signal Positive
7
GND
GND
-
Ground
8
MIPI_DSI_TX0_CLKN
LVDS
Output
MIPI-DSI0 clock signal Negative
9
MIPI_DSI_TX0_CLKP
LVDS
Output
MIPI-DSI0 clock signal Positive
10
GND
GND
-
Ground
11
MIPI_DSI_TX0_D2N
LVDS
Output
MIPI-DSI0 data signal Negative
12
MIPI_DSI_TX0_D2P
LVDS
Output
MIPI-DSI0 data signal Positive
13
GND
GND
-
Ground
14
MIPI_DSI_TX0_D3N
LVDS
Output
MIPI-DSI0 data signal Negative
15
MIPI_DSI_TX0_D3P
LVDS
Output
MIPI-DSI0 data signal Positive
16
GND
GND
-
Ground
17
LCD0_BL_PWM4
IO
Output
PWM Output for backlight adjust
18
NC
-
-
Not connected pin
19
3.3V
PWR
Output
3.3V @ 200mA Max
20
LCD0_RST_L_GPIO1_D1
IO
Output
GPIO output for lcd reset
21
SARADC_VIN2_LCD_ID
ANA
Input
Analog signal Input
22
LCD0_PWREN_H_GPIO0_C7
IO
Output
GPIO output for lcd power on
23
I2C1_SCL_TP
IO
Output
I2C clock signal for touch panel
24
I2C1_SDA_TP
IO
I/O
I2C data signal for touch panel
25
TP_INT_L_GPIO0_B5
IO
Input
GPIO for touch panel interrupt
26
TP_RST_L_GPIO0_B6
IO
Output
GPIO for touch panel reset
27
GND
GND
-
Ground
28
5V
PWR
Output
5V @ 500mA Max in total
29
5V
PWR
Output
5V @ 500mA Max in total
30
5V
PWR
Output
5V @ 500mA Max in total
2.14 MIPI-DSI1
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
GND
GND
-
Ground
2
MIPI_DSI_TX1_D0N
LVDS
Output
MIPI-DSI1 data signal Negative

Edge 2 – User Manual MIXTILE
- 17 -
V1.3 Copyright ©2022 MIXTILE.
3
MIPI_DSI_TX1_D0P
LVDS
Output
MIPI-DSI1 data signal Positive
4
GND
GND
-
Ground
5
MIPI_DSI_TX1_D1N
LVDS
Output
MIPI-DSI1 data signal Negative
6
MIPI_DSI_TX1_D1P
LVDS
Output
MIPI-DSI1 data signal Positive
7
GND
GND
-
Ground
8
MIPI_DSI_TX1_CLKN
LVDS
Output
MIPI-DSI1 clock signal Negative
9
MIPI_DSI_TX1_CLKP
LVDS
Output
MIPI-DSI1 clock signal Positive
10
GND
GND
-
Ground
11
MIPI_DSI_TX1_D2N
LVDS
Output
MIPI-DSI1 data signal Negative
12
MIPI_DSI_TX1_D2P
LVDS
Output
MIPI-DSI1 data signal Positive
13
GND
GND
-
Ground
14
MIPI_DSI_TX1_D3N
LVDS
Output
MIPI-DSI1 data signal Negative
15
MIPI_DSI_TX1_D3P
LVDS
Output
MIPI-DSI1 data signal Positive
16
GND
GND
-
Ground
17
PWM5
IO
Output
PWM Output for backlight adjust
18
NC
-
-
Not connected pin
19
3.3V
PWR
Output
3.3V @ 200mA Max
20
LCD1_RST_L_GPIO3_B6
IO
Output
GPIO output for lcd reset
21
SARADC_VIN2_LCD_ID
ANA
Input
Analog signal Input
22
LCD1_PWREN_H_GPIO4_D2
IO
Output
GPIO output for lcd power enable
23
I2C1_SCL_TP
IO
Output
I2C clock signal for touch panel
24
I2C1_SDA_TP
IO
I/O
I2C data signal for touch panel
25
TP_INT_L_GPIO0_B5
IO
Input
GPIO for touch panel interrupt
26
TP_RST_L_GPIO0_B6
IO
Output
GPIO for touch panel reset
27
GND
GND
-
Ground
28
5V
PWR
Output
5V @ 500mA Max in total
29
5V
PWR
Output
5V @ 500mA Max in total
30
5V
PWR
Output
5V @ 500mA Max in total
2.15 eDP
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
GND
GND
-
Ground
2
EDP_TX_D1N
LVDS
Output
EDP data signal Negative
3
EDP_TX_D1P
LVDS
Output
EDP data signal Positive
4
GND
GND
-
Ground
5
EDP_TX_D0N
LVDS
Output
EDP data signal Negative
6
EDP_TX_D0P
LVDS
Output
EDP data signal Positive
7
GND
GND
-
Ground
8
EDP_TX_AUXN_CON
LVDS
Output
EDP clock signal Negative
9
EDP_TX_AUXP_CON
LVDS
Output
EDP clock signal Positive
10
GND
GND
-
Ground

Edge 2 – User Manual MIXTILE
- 18 -
V1.3 Copyright ©2022 MIXTILE.
11
EDP_TX_D2N
LVDS
Output
EDP data signal Negative
12
EDP_TX_D2P
LVDS
Output
EDP data signal Positive
13
GND
GND
-
Ground
14
EDP_TX_D3N
LVDS
Output
EDP data signal Negative
15
EDP_TX_D3P
LVDS
Output
EDP data signal Positive
16
3.3V
PWR
Output
3.3V @ 500mA Max in total
17
3.3V
PWR
Output
3.3V @ 500mA Max in total
18
GND
GND
-
Ground
19
GND
GND
-
Ground
20
EDP_HPD_GPIO0_C2
IO
Input
eDP hot plug detect signal
21
GND
GND
-
Ground
22
GND
GND
-
Ground
23
GND
GND
-
Ground
24
GND
GND
-
Ground
25
EDP_BL_EN_GPIO3_C1
IO
Output
Output for enable backlight power
26
EDP_PWM12_GPIO4_C5
IO
Output
PWM Output for backlight adjust
27
GND
GND
-
Ground
28
12V
PWR
Output
12V power supply for backlight
29
12V
PWR
Output
12V power supply for backlight,
30
12V
PWR
Output
12V power supply for backlight
2.16 Camera
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
GND
GND
-
Ground
2
MIPI_CSI_RX_D0N
LVDS
Input
MIPI_CSI data signal Negative
3
MIPI_CSI_RX_D0P
LVDS
Input
MIPI_CSI data signal Positive
4
GND
GND
-
Ground
5
MIPI_CSI_RX_D1N
LVDS
Input
MIPI_CSI data signal Negative
6
MIPI_CSI_RX_D1P
LVDS
Input
MIPI_CSI data signal Positive
7
GND
GND
-
Ground
8
MIPI_CSI_RX_CLK0N
LVDS
Input
MIPI_CSI clock signal Negative
9
MIPI_CSI_RX_CLK0P
LVDS
Input
MIPI_CSI clock signal Positive
10
GND
GND
-
Ground
11
MIPI_CSI_RX_D2N
LVDS
Input
MIPI_CSI data signal Negative
12
MIPI_CSI_RX_D2P
LVDS
Input
MIPI_CSI data signal Positive
13
GND
GND
-
Ground
14
MIPI_CSI_RX_D3N
LVDS
Input
MIPI_CSI data signal Negative
15
MIPI_CSI_RX_D3P
LVDS
Input
MIPI_CSI data signal Positive
16
GND
GND
-
Ground
17
CIF_CLKOUT
IO
Output
CLOCK output for camera
18
GND
GND
-
Ground

Edge 2 – User Manual MIXTILE
- 19 -
V1.3 Copyright ©2022 MIXTILE.
19
NC
-
-
Not connected pin
20
CAMERA0_RST_L_GPIO4_B5
IO
Output
GPIO output for camera reset
21
CAMERA0_PDN_L_GPIO4_B4
IO
Output
GPIO output for camera disable
22
CAMERA0_PWREN_GPIO1_D4
IO
Output
GPIO output for camera enable
23
I2C4_SCL_M0
IO
Output
I2C clock signal
24
I2C4_SDA_M0
IO
Input
I2C data signal
25
PWM14_M0
IO
Output
PWM Output signal
26
GND
GND
-
Ground
27
GND
GND
-
Ground
28
5V
PWR
Output
5V @ 500mA Max in total
29
5V
PWR
Output
5V @ 500mA Max in total
30
5V
PWR
Output
5V @ 500mA Max in total
31
GND
GND
-
Ground
32
NC
-
-
Not connected pin
33
NC
-
-
Not connected pin
34
NC
-
-
Not connected pin
35
GND
GND
-
Ground
36
MIPI_MCLK1
IO
Output
CLOCK output for camera
37
GND
GND
-
Ground
38
MIPI_CSI_RX_CLK1N
LVDS
Input
MIPI_CSI clock signal Negative
39
MIPI_CSI_RX_CLK1P
LVDS
Input
MIPI_CSI clock signal Positive
40
GND
GND
-
Ground
2.17 M.2
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1
NC
-
-
Not connected pin
2
3.3V
PWR
Output
3.3V @ 3A Max in total
3
GND
GND
-
Ground
4
3.3V
PWR
Output
3.3V @ 3A Max in total
5
GND
GND
-
Ground
6
M2_ONOFF_GPIO1_D2
IO
Output
GPIO output for on or off to module
7
HUB_HOST3_DP
LVDS
I/O
USB2.0 data signal Positive
8
NC
-
-
Not connected pin
9
HUB_HOST3_DM
LVDS
I/O
USB2.0 data signal Negative
10
M2_LED1
IO
Input
Connect negative for network status
11
GND
GND
-
Ground
20
NC
-
-
Not connected pin
21
NC
-
-
Not connected pin
22
NC
-
-
Not connected pin
23
M2_WAKE_GPIO0_B7
IO
Input
GPIO for module to wakeup CPU
24
NC
-
-
Not connected pin

Edge 2 – User Manual MIXTILE
- 20 -
V1.3 Copyright ©2022 MIXTILE.
25
NC
-
-
Not connected pin
26
NC
-
-
Not connected pin
27
GND
GND
-
Ground
28
NC
-
-
Not connected pin
29
PCIE30_TX1_N/HUB_USB3_SSTXN
LVDS
Output
PCIE3.0/USB3.0 data signal Negative
30
M2_UIM_RESET
IO
Input
Reset signal to SIM socket
31
PCIE30_TX1_P/HUB_USB3_SSTXP
LVDS
Output
PCIE3.0/USB3.0 data signal Positive
32
M2_UIM_CLK
IO
Input
Clock signal to SIM socket
33
GND
GND
-
Ground
34
M2_UIM_DATA
IO
Input
data signal to SIM socket
35
PCIE30_RX1N/HUB_USB3_SSRXN
LVDS
Input
PCIE3.0/USB3.0 data signal Negative
36
M2_UIM_PWR
IO
Input
power to SIM socket
37
PCIE30_RX1P/HUB_USB3_SSRXP
LVDS
Input
PCIE3.0/USB3.0 data signal Positive
38
NC
-
-
Not connected pin
39
GND
GND
-
Ground
40
NC
-
-
Not connected pin
41
PCIE30_TX0_N
LVDS
Output
PCIE3.0 data signal output Negative
42
NC
-
-
Not connected pin
43
PCIE30_TX0_P
LVDS
Output
PCIE3.0 data signal output Positive
44
NC
-
-
Not connected pin
45
GND
GND
-
Ground
46
NC
-
-
Not connected pin
47
PCIE30_RX0N
LVDS
Input
PCIE3.0 data signal input Negative
48
NC
-
-
Not connected pin
49
PCIE30_RX0P
LVDS
Input
PCIE3.0 data signal input Positive
50
PCIE30X2_PERSTN_M1
IO
Output
PCIe warm reset request
51
GND
GND
-
Ground
52
PCIE30X2_CLKREQN_M1
IO
Input
clock request from PCIe peripheral
53
CLK0N_CON
LVDS
Output
PCIE3.0 clock signal output Negative
54
PCIE30X2_WAKEN_M1
IO
Input
PCIe wake up
55
CLK0P_CON
LVDS
Output
PCIE3.0 clock signal output Positive
56
NC
-
-
Not connected pin
57
GND
GND
-
Ground
58
NC
-
-
Not connected pin
59
NC
-
-
Not connected pin
60
NC
-
-
Not connected pin
61
NC
-
-
Not connected pin
62
NC
-
-
Not connected pin
63
NC
-
-
Not connected pin
64
NC
-
-
Not connected pin
65
NC
-
-
Not connected pin
66
M2_SIM_DETECT
IO
Output
Card detect signal to SIM socket
67
M2_RESET_GPIO3_B5
IO
Output
GPIO output for reset to module