Mixx I Series Administrator Guide

SMARTWATCH
Watch S1
Full Touch Screen
SERIES I
HOW TO GUIDE

THANKS!
Thank you for choosing to buy our MIXX S1 SmartWatch.
All products brought to you by MIXX Limited come
with a 2 year warranty for peace of mind.
Feedback is welcome, email us on [e-mail]
for any comments or queries.
IMPORTANT!
Please DO NOT pair the MIXX SmartWatch using the
Bluetooth settings on your phone.
Please scan the QR Code or enter URL
https://bit.ly/MIXX-STP to install
the FREE Smart-Time Pro App on
your phone.
Pair your watch with your phone
using this APP.
We hope you enjoy using your S1 SmartWatch.
SMARTWATCH

LET’S START 1
LET’S INSTALL THE APP 3
LET’S PAIR THE APP TO YOUR WATCH 5
LET’S STAY CHARGED 7
LET’S CHANGE THE WATCH STRAP 7
LET’S PLAY 8
LET’S VIEW TECHNICAL SPECS 16
CONTACT MIXX 16
NEED EXTRA HELP? 17
EXEMPTION CLAUSE 18
WARRANTY CLAUSE 19
CONTENTS

LET’S START
What’s in the box?
A MIXX S1 SmartWatch
1 2
Multi-touch Screen
Home Screen Button
Watch Strap
SmartWatch LED Lights
Pin Straps x 2
Charging Prongs
Magnetic USB Charging Cable
1
2
3
4
3
5
6
7
2
1

2
46
7
5
5

LET’S INSTALL THE APP
Please follow the instructions as numbered:
1. Scan the QR Code to download the free
SMART-TIME PRO App on to your
smartphone.
2. Tap to install the SMART-TIME PRO App
and then tap to open.
3. Follow the on-screen instructions to register
and to set-up an account.
4. Login to the App and follow the on-screen instructions.
You should see the Status screenshot (shown on the right)
with 3 tabs at the bottom of your screen.
Status – the orange icon shows this screen is active.
The Status screenshot is your dashboard screen.
Device – the grey icon, this screen is not
active until you click on the icon.
Me - the grey icon, this screen is not active
until you click on the icon.
Note: The SMART-TIME PRO APP supports iOS 11.0 or
later, Android 5.0 or later and Bluetooth 5.0.
3
B
C
A

4
AB C

LET’S PAIR THE APP TO YOUR WATCH
IMPORTANT!
Please install the App and follow the instructions as numbered:
1. Tap to activate the device screen. The ‘Device’ icon
should turn orange.
2. Tap ‘Add device’ at the top of your screen.
3. Accept the App instructions for location permission.
4. Select ‘SMA-R4’ on your phone then, you should see a
‘Please confirm on the device’ message on your screen.
5. From your S1 SmartWatch screen you should
see same circle shaped ‘Pair’ screen.
Tap the on your watch to confirm.
6. You should now be successfully paired
with your S1 SmartWatch.
5
Tap the S1 Multi-touch Screen and swipe down to view
Quick Setting Menu. A blue icon confirms pairing was
successful. A grey icon means there was no connection,
please start again.
B
D
E
F
1
NOTE: Please DO NOT try to pair your MIXX S1 SmartWatch
using the Bluetooth settings on your phone.Unpair with your
phone’s Bluetooth settings and start from the ‘IMPORTANT!’
message above.

6
You require Android 5.0 or Apple iOS 11.0 and later to pair
with this App. Only one smartphone can be paired to the
S1 SmartWatch. To pair other mobile phones, please unbind
the current phone before pairing.
To UNBIND, tap the ‘Device’ screen and scroll to the
bottom until you see the UNBIND icon. Select and confirm.
B
AB C E F
D

LET’S STAY CHARGED
Turn the watch over, to align and attach the charging pins to the
Magnetic USB Charging Cable . You will see the charging
icon on the watch screen will display for 5 seconds.
It will take up to 2 hours to fully charge this watch and then
a battery icon will show.
Regular wiping of the charge contact points will ensure
there are no problems charging your watch.
LET’S CHANGE THE
WATCH STRAP
You can replace the watch strap
with most regular 20mm straps
and attach it to the watch body. Just
slide the pins to remove the straps
and replace with the new ones.
7
6
Pins
Pins
7 8