Mixx EX1 Administrator Guide

EX1
Over-ear Wireless Headphones
HOW TO GUIDE

THANKS!
Thanks for choosing our EX1 Wireless Headphones.
All of our products come with a 2 year warranty for peace of mind.
Feedback is welcome, email us on [email protected]
for any comments or queries.

2
4
5
5
6
7
8
10
10
11
12
13
CONTENTS
LET’S START
LET’S CONNECT
LET’S ASK GOOGLE OR SIRI
LET’S USE THE PRESET EQ
SETTINGS LET’S STAY CHARGED
LET’S GOWIRED
LET’S PLAY
LET’S VIEW TECHNICAL SPECS
CONTACT MIXX
NEED EXTRA HELP?
LET’S BESAFE
LET’S RECYCLE
SAFE USAGE INFO

LET’S START
32
What’s in the box?
A pair of headphones
1
3
4
5
6
2
789

Multi-function Touch Sensor
On/Off Touch Sensor
Volume Up / Previous Track
Touch Sensor
Accept / Decline Call Touch Sensor
Volume Down / Skip Track
Touch Sensor
3.5mm Audio Port
Microphone
USB Type C Charging Port
LED Indicator Light
USB Type C Charging Cable
3.5mm Audio Cable
Travel friendly
For ease of storage while travelling,
swing the MIXX EX1 ear pads in towards
the headband to pop them in your bag
or place the headband around your neck
and rotate the earpads to sit on your
shoulders for your convenience.
1
2
3
4
5
6
7
8
9
11
10
10 11
3HOW TO GUIDE EN

LET’S CONNECT
First Time Pairing
Press and hold the Multi-function Touch
Sensor to power on your MIXX EX1
wireless headphones.
A voice prompt ‘Power on, pairing’ confirms
the headphones are on and in pairing mode.
The LED Indicator Light will flash BLUE and
WHITE ready to pair with your audio device.
Go to the Bluetooth settings on your audio
device to select ‘MIXX EX1 Headphones’ from
the list. Once paired successfully you will
hear ‘Connected’ and the LED Indicator
Light will turn off.
You can now enjoy your music, watch a video or take a call hands free.
If there is no Bluetooth connection after 5 minutes the headphones will
automatically turn off by confirming with ‘Power off’ and the LED Indicator
Light will flash WHITE once and then switch off.
The headphones will automatically reconnect to the last device they were paired
with, confirming ‘Connected’.
2
9
9
4
9
9 5
2
1
3

LET’S ASK GOOGLE ASSISTANT / SIRI
Pair your Bluetooth device with your headphones.
Triple tap Multi-function Touch Sensor to activate Siri or Google Assistant.
The voice assistant familiar ‘Beep’ will sound to confirm connection. You can now
ask Siri or Google Assistant a question or state a command.
LET’S USE THE PRESET EQ SETTINGS
Choose from 3 Equalisation (EQ) modes to suit your personal preference –
no App required.
 Bass boost mode increases the bass sound.
 Voice mode decreases the bass, the high-frequency tones
and increases the speech frequencies.
 Music mode returns you to the optimal EQ for music listening.
To change EQ settings, press and hold both and Touch Sensors
for 3 seconds to cycle through the Music, Bass Boost and Voice modes.
The music mode is your default setting.
1
3 5
5HOW TO GUIDE EN

LET’S STAY CHARGED
A voice prompt ‘Battery low’ allows for 2 minutes play time before the headphones
power down stating ‘Battery low, power off’. The LED Indicator Light will flash
WHITE once and will then switch off.
Connect the headphones to a suitable USB wall charger, a computer USB port or
a power bank using the USB Type C Charging Cable supplied and connect it to
the headphones USB Type C Charging Port .
While charging the LED Indicator Light will glow WHITE.
Once the headphones are fully charged, the LED Indicator Light will turn off.
This can take between 1 and 2 hours.
9
9
9
8
10
TIP: 15 MINUTE QUICK CHARGE
If you’re running low on power, charge your headphones for
15 minutes and get 8 hours extra play time while on the go.
6

LET’S GO WIRED
The MIXX EX1 headphones are suitable for
devices with a 3.5mm audio socket.
The 3.5mm audio cable supplied
provides the flexibility to convert from
wireless headphones to wired use.
Convenient when watching movies on
a plane or when there is no Bluetooth
connection.
Insert the 3.5mm audio cable into the
3.5mm Audio Port of your headphones
and the other end into your phone or
the plane’s 3.5mm audio socket to start
listening to your music or movie.
The EQ function is not available when using
the 3.5mm audio cable.
6
11
11
7HOW TO GUIDE EN

LET’S PLAY
First Time Pairing
Press and hold Touch Sensor to power
on your headphones.
Go to the Bluetooth settings on your audio
device to select ‘MIXX EX1 Headphones’
from the list.
Once paired with your device, you will
hear ‘Connected’.
8
Play / Pause
Double tap Multi-function Touch Sensor
Volume Up / Down
Single tap Touch Sensor to increase volume / Touch Sensor to decrease volume
Skip / Previous Track
Press and hold Touch Sensor / Touch Sensor for 3 seconds
1
3
3 5
5
2
9 5 4
2
1
3