MME Motorsport ARBT-01-2L User manual

Air Compressor Kit
ARBT-01-2L/3L
COMP-01-12V-14BAR
MME Motorsport
www.mme-motorsport.com
Revision 2019-06-21
Air Compressor Kit
Features
High performance, top of the line 12V air compressor
2 liter or 3 liter accumulator (bottle)
Pressure switch (8.5 bar ON, 9.5 bar OFF)
Low pressure warning switch
Overload safety valve (pressure relief)
Pressure regulator (2 - 8 bar)
Integrated relay with fuse

Air Compressor Kit
ARBT-01-2L/3L
COMP-01-12V-14BAR
MME Motorsport
www.mme-motorsport.com
Revision 2019-06-21
Technical specifications
Air bottle 2L
Air bottle 3L
Dimensions L x W x H
145 x 130 x 270 m
145 x 130 x 360 mm
Weight
2060g
2300g
Voltage
12V
12V
Operating temperature
-20 ... 80°C
-20 ... 80°C
Max pressure
14 bar
14 bar
Compressor
Dimensions L x W x H
210 x 100 x 180 mm
Weight
3900g
Voltage
12V
Operating temperature
-20 ... 80°C
Duty cycle
100% @ 7bar
Max Pressure
14 bar
Max Amp Draw
23 amp (@ 13.8 volts)
Pressure (bar)
Fill Liter / Minute
Amps
0
44.7
12
1
38.1
13
2
33.3
15
3
30.6
16
4
29.1
17
5
27.1
18
6
25.3
19
7
24.0
20
8
22.4
21
9
21.0
23
10
19.5
21
11
18.2
20
12
16.7
19
13
15.2
19
14
13.5
18

Air Compressor Kit
ARBT-01-2L/3L
COMP-01-12V-14BAR
MME Motorsport
www.mme-motorsport.com
Revision 2019-06-21
Safety rules
- Before assembling please read general rules. You received air bottle and compressor which must be
assembled and connected together. All parts shall not be exposed to heat and water.
- Never allow children to operate this compressor kit. Close supervision is necessary when this
compressor is being used near children.
- This compressor will become very HOT during and immediately after use. Do not touch any part of this
compressor with bare hands, during and immediately after use.
- Do not use this product near flames or explosive materials or where aerosol products are being used. - -
- Do not pump anything other than atmospheric air.
- Never use this product while sleepy or drowsy.
- Do not use any tools or attachments without first determining maximum air pressure for that tool or
attachment.
- Never point any air nozzle or air sprayer toward another person or any part of the body.
- This air compressor is equipped with an Automatic Reset Thermal Protector, and can automatically
restart after the thermal protector resets. Always cut off power source when thermal protector becomes
activated.
- Wear safety glasses or goggles when operating this product.
- Use only in well ventilated areas.
Air bottle content
①Relay with fuse (30A)
②High pressure switch (8.5 bar ON, 9.5 bar OFF)
③Low pressure switch (6 bar)
④Output pressure with regulator
⑤Overload safety valve
⑥Pressure input (from compressor)
1
2
4
5
6
3

Air Compressor Kit
ARBT-01-2L/3L
COMP-01-12V-14BAR
MME Motorsport
www.mme-motorsport.com
Revision 2019-06-21
Assembling
The installation of air bottle in the car must be cross direction of driving. In case of accident we prevent air
bottle from slipping from mounting clamps.
To compressor we attach air filter which can be mounted directly or away from compressor. Air filter
should be in dry area away from heat the elements.
Compressor and air bottle we connect with pneumatic pipe which is mounted on compressor. Output
pneumatic tube is Ø8 mm.
Regulated air output
Air filter
Air filter

Air Compressor Kit
ARBT-01-2L/3L
COMP-01-12V-14BAR
MME Motorsport
www.mme-motorsport.com
Revision 2019-06-21
Wiring diagram

Air Compressor Kit
ARBT-01-2L/3L
COMP-01-12V-14BAR
MME Motorsport
www.mme-motorsport.com
Revision 2019-06-21
Technical drawing

Air Compressor Kit
ARBT-01-2L/3L
COMP-01-12V-14BAR
MME Motorsport
www.mme-motorsport.com
Revision 2019-06-21
Servicing
1. Periodically check all electrical, fittings connections. Clean and tighten as needed.
2. Periodically check all mounting screws. Tighten as needed.
3. Replace Air Filter Element periodically. Replacement frequency depends on operating frequency and
operating environment. For frequent use in dusty environment, we recommend that you replace air filter
element at least once a month.
4. Regularly clean dust and dirt from compressor cooling fins and motor housing.
5. Your air compressor is equipped with a permanently lubricated, maintenance-free motor. Never try to
lubricate the compressor.
6. All repairs should be performed by Manufacturer.
7. Once per year air bottle should be opened and drained of excess water.
Ordering
Compressor: COMP-01-12V-14BAR
Air Bottle 2L: ARBT-01-2L-KIT-8MM
Air Bottle 3L: ARBT-01-3L-KIT-8MM