Mobital BOUTIQUE User manual

ASSEMBLY INSTRUCTIONS
BOUTIQUE
DINING TABLE 1/4
PAGES
First use wrench "F" to tighten screw
"G" on the metal disc, then screw part
"E" on "G" by hand until the flat side of
"E" fits the disc well.
Put the level "H" separately on position
1 and 2, and adjust the foot stoppers until
the metal frame stands in a horizontal
state at both ends.

ASSEMBLY INSTRUCTIONS
BOUTIQUE
DINING TABLE 2/4
PAGES

ASSEMBLY INSTRUCTIONS
BOUTIQUE
DINING TABLE 3/4
PAGES
1. When the extension
glass is on a higher level
than the big glass, loosen
nut "I" by wrench "A",
twist "E" by hand as per
the arrow until the
extension glass and big
glass are on the the same
level, then tighten "I". Do
the same on the other side.
2. If the extension glass and
big glass are not leveled,
loosen nut "I", move the big
glass until they are on the
same level, then tighten "I".

ASSEMBLY INSTRUCTIONS
BOUTIQUE
DINING TABLE 4/4
PAGES