Mobital CANTRO User manual

ASSEMBLY INSTRUCTIONS
CANTRO DINING TABLE
PAGES
1/1
ASSEMBLY INSTRUCTIONS
CANTRO DINING TABLE
PAGES
1/1
GENERAL NOTE: CAREFULLY REMOVE ALL WRAPPING MATERIALS AND ENSURE ALL PARTS ARE
ACCOUNTED FOR. ASSEMBLE ON A CLEAN FLAT SURFACE TO AVOID SCRATCHES. DO NOT DISCARD
THE PACKAGING UNTIL ITEM IS FULLY ASSEMBLED.
1/1
92
42 29
78
85 92 196
Unit=cm
ASSEMBLY INSTRUCTIONS
ITEM:ISO
SOFABED-SINGLE
PAGE 1 OF 2
ITEM: CANTRO
DIN TABLE

ASSEMBLY INSTRUCTIONS
CANTRO DINING TABLE
PAGES
1/1
GENERAL NOTE: CAREFULLY REMOVE ALL WRAPPING MATERIALS AND ENSURE ALL PARTS ARE
ACCOUNTED FOR. ASSEMBLE ON A CLEAN FLAT SURFACE TO AVOID SCRATCHES. DO NOT DISCARD
THE PACKAGING UNTIL ITEM IS FULLY ASSEMBLED.
1/1
92
42 29
78
85 92 196
Unit=cm
ASSEMBLY INSTRUCTIONS
ITEM:ISO
SOFABED-SINGLE
PAGE 2 OF 2
ITEM: CANTRO
DIN TABLE
HOW TO ADJUST LEAVES SO IT’S
LEVEL WITH THE MIDDLE GLASS.
Please be extremely cautious
when doing this adjustment
and always have someone
holding both ends of the glass
top.
1. Loosen screws. Once
screws are loose, you will be
able to move the leaves later-
ally until it is aligned.
2. For vertical alignment, you
simply need to adjust the be-
low encircled locks with the
screws still loosened.
The glass needs to be careful-
ly lifted until it is aligned and
then locks need to be put back
in place (either up or down).