Mobotix D26 Dome Instructions for use

32.815-002_EN_10/2017
Quick Install
D26 Dome
Mounting Options with Accessories
D26 Dome
• Weatherproof Dome camera for wall or ceiling mounting
• As day and night variant (6MP color or B/W sensor)
• Mx6 system platform with H.264 support
• Broad range of system accessories available
• Recording on internal MicroSD card (SDXC, SDHC installed)
• Sensor for temperature and shock detector(*) integrated
Standard Delivery D26
1.1
1.16
1.15
1.3
1.13
1.12
1.14
1.2
1.4
1.5
1.7
1.8
1.9
1.10
1.11
1.6
Item Count Part Name
1.1 1 Camera housing
1.2 1 Lens (not with D26 Body)
1.3 1 Dome, transparent
1.4 1 microSD card (SDXC, SDHC pre-installed)
1.5 1 Ethernet cable CAT5 0,5 m/20" (pre-installed)
1.6 1 Hinged ferrite
1.7 1 Allen wrench 3 mm
1.8 1 Torx wrench TX20
1.9 1 Toothed wrench
1.10 1 Outer shell
1.11 1 Mounting ring
1.12 4 Stainless steel washers 5,3 mm dia.
1.13 4 Dowels 8 mm
1.14 4 Stainless steel Torx screws4,5x60 mm
1.15 4 Stainless steel washers 4,3 mm dia.
1.16 4 Stainless steel Allen screws M4x16 mm
Connections and Initial Operation of the D26
You can nd detailed information on the installation and connections of the D26 in the D25 Camera Manual (PDF, available on www.mobotix.com >
Support > Manuals).
Please note that the boot options of this camera have changed compared to its predecessor (see «Boot Options of the D26» on page 2 ) and the camera
only has one key ("R"). Regarding the rest of the initial operation of the D26, please see the D25 Camera Manual in Chapter 3, «Initial Operation» .
Outershell
Dome
Network
connection (*) USB
Slot for microSD card
LEDs
Lens
"R" key
Mounting
ring
* To suppress electromagnetic interference, attach the enclosed hinged ferrite (item 1.6) to the pre-installed Ethernet cable of the camera. The hinged
ferrite should be positioned as close as possible to the camera body.
Wall Mount On-Wall Set Vandalism Kit
Mounting Options of the D26
Preparing the camera for mounting
Remove the outer shell and unscrew the dome.
Installation on Walls or Ceilings Without Accessoires
Aer drilling the holes for xtures (see « Drilling Templates »), attach the
mounting ring of the D25 at the designated position using dowels and screws.
Next, connect the cabling, point the camerainto the viewing direction and
adjust the focus of the lens (see «Initial Operation of the «Initial Operation
of the D26» ). Finally, install the dome and the outer shell.
Installation With On-Wall Set/On-Wall Set 10° (Accessory)
Aer drilling the holes for xtures (see «Drilling Templates» ) attach the
On-Wall Set at the designated position using dowels and screws, then
lead the cabling into the On-Wall Set. Next, remove the mounting ring of
the D26, connect the cabling and install the camera on the On-Wall Set.
Finally, install the dome and the outer shell.
Installation With Cavity Wall Installation Set (Accessory)
Aer cutting out the hole (see «Drilling Templates» ), remove the mounting
ring of the D26 and install the camera in the Cavity Wall Installation Set.
Next, connect the cabling and install the camera together with the Cavity
Wall Installation Set into the cut-out and fasten it using the winged cams.
Finally, press the decoration ring onto the camera and lock it in placeusing
the toothed wrenches.
Installation With Outdoor Wall Mount (Accessory)
Remove the cover plate of the Outdoor Wall Mount. Aer drilling the holes
for xtures (see «Drilling Templates» ), attach the Outdoor Wall Mount at
the designated position using dowels and screws, then lead the cabling
into the mount. Next, remove the mounting ring of the D26, connect the
cabling and click the camera into the clamps of the cover plate of the
Outdoor Wall Mount. Then attach the cover plate with the camera to the
Outdoor Wall Mount. Finally, install the dome and the outer shell.
Installation With Pole MOunt and Outdoor Wall Mount (Accessory)
Lead the cabling from the rearthrough the Pole Mount and attach to a pole
(using steel straps). Then attachthe Outdoor Wall Mount to the Pole Mount.
The remaining installation of the D26 follows the stepsunder «Installation
With Outdoor Wall Mount (Accessory)» above.
Installation of the Vandalism Kit (Accessory)
Screw in the reinforced dome and set the four spacers onto the mounting
ring of the camera. Place the stainless steel outer shell onto the camera
and tighten it using the four security screws.
100mm
Ø5,5mm
100mm
141.4mm
4x
Universal 6MP Dome Camera for
Ceiling, Wall and Pole Mounting
MOBOTIX 6MP camera for use in indoor and outdoor
applications. Can be used as day or night variant with
lenses MX-B036 to MX-B237. Can be extended exibly
using various mounting sets. Optional Vandalism Kit for
surveillance at extremely critical locations.
More information:
www.mobotix.com > Products > Outdoor Cameras > D26
Inserting/Exchanging the SD Card
All camera models can use the integrated microSD card (SDXC)to record video data. In order to exchange the microSD card,please proceed as outlined
in the following instruction. For information on reliable SD cards,please see the MOBOTIX website www.mobotix.com> Support > MxMedia Library >
Planning in the document MicroSD Card Whitelist for MOBOTIX Cameras .
When replacing the SD card, makesure that recording has been deactivated in the browser ( Admin Menu > Storage> Storage on External File Server /
Flash Device ; activate recording again in the same dialog aer exchanging the card).
1.Remove the SD Card
If a microSD card has been installed,gently press
with your nger as indicated by the arrow until
you hear a click . Then release the SD card. The
card is protruding slightly and can be easily
removed.
2.Insert the SD Card
Insert the microSD card and gently presswith
your nger as indicated by the arrow until you
hear another click .
Make sure that the SD card is fully inserted.
Flush-Mount Set
Click!
Click!
*: with rmware version 5.0.1 and higher

MOBOTIX AG
Kaiserstrasse
D-67722 Langmeil
Tel.: [phone]
Fax: [phone]
[email protected]
www.mobotix.com
Declaration of Conformity: www.mobotix.com > Support > MxMedia Library > Certicates
MOBOTIX, the MX logo, MxControlCenter,MxEasy, MxPEG and MxActivitySensor are trademarks of
MOBOTIX AG registeredin the European Union, the U.S.A., and other countries • Information subject to
change without notice • MOBOTIX does not assume any liability for technicalor editorial errors or omissions
contained herein • All rights reserved • © MOBOTIX AG2017
Initial Operation of the D26
The initial operation starts with connectingthe power supply (see section «Network and PowerConnection, Additional Cables» in the D25 Camera Manual ).
The rst access follows the procedure described in the same manual in the «Initial Operation of the Camera» section. All other tasks require access to
the camera's user interface in the browser. Enter the camera’s IP address into the address bar of the browser.
1.Select the lens
Open the Admin Menu > Hardware Congura-
tion > Lens Conguration dialog and select the
installed lens. This step is required to select the
proper special functions of the installed lens (e.g.,
for wide-angle lenses).
2.Adjust the lens focus
Remove the dome before proceeding.
Check the live image from the camerain the browser. Activate the focusing
aid in the browser (Focusing Aid quick control, Activated value).
Carefully turn the lens by hand (possibly with
a cloth, see Safety Warnings, "Never touch
the lens") in clockwise or counter-clockwise
direction until the red area of the focusing
aid is as small as possible.
Once the focus is adjusted properly,deactivate
the focusing aid again (Focusing Aid quick
control, Disabled value).
Note: Due to the lens eect of the dome, the focus of the B237 tele lens is
shiing slightly once the dome has been mounted. Before mounting the
dome, the tele lens should be turned about 90° in counter-clockwise
direction (as seen from the lens' front). Make surethat you check the focus
of the live image in your browser with the dome installed and re-adjust
the lens, if required.
3.Save the conguration
In the live image of the browser, select the Manage Settings quick con-
trol and set Store Entire Conguration as value. The camera stores the
conguration in the permanent camera memor y so that the settings will
be applied at the next camera reboot.
Technical Specications D26
Lens Options
MX-B036 to MX-B237 (20 to 135 mm in 35 mm format),
103° to 15° horizontal angle of view
Sensitivity • Color sensor (day): 0,1 lx @ 1/60s; 0,005 lx @ 1s
• BW sensor (night): 0,02 lx @ 1/60s; 0,001 lx @ 1s
Image Sensor 1/1,8“ CMOS, 6MP (3072x2048), Progressive Scan
Max. Image Size 6MP (3072x2048)
Image Formats
Freely congurable format 4:3, 8:3, 16:9 or customized
format (image cropping), e.g., 2592x1944 (5MP), 2048x1536
(QXGA), 1920x1080 (Full-HD), 1280x960 (MEGA)
Max. Frame Rate
• MxPEG: 42@HD (1280x720), 34@Full-HD, 24@QXGA,
15@5MP, 12@6MP
• M-JPEG: 26@HD (1280x720), 13@Full-HD, 9@QXGA,
5@5MP, 4@6MP
• H.264: 25@Full-HD, 20@QXGA
Video Codec
• MxPEG, M-JPEG, JPEG (max. output format 6MP)
• H.264 (max. output format QXGA; bandwith limitation
possible)
DVR
• Camera-internal via microSD card (SDXC, SDHC pre-
installed)
• External on USB device
• External on NAS
• Full image recording regardless of live image zoom
• MxFFS
• Pre-alarm and post-alarm images
• DVR monitoring with error notication
Soware Videomanagement Soware MxManagementCenter
Image Processing MxLEO, backlight compensation, automatic white
balance, image distortion correction
PTZ Digital pan/tilt/zoom; max. zoom 8x (continious)
Alarm/Events
Temperature sensor, shock detector (with rmware version
5.0.1 and higher), other sensors/IO via MxMessageSystem,
notication via e-mail, FTP, IP telephony (VoIP, SIP), visual/
sound alarms, pre- and post-alarm images
Intelligent Video
Analysis
MxActivitySensor, video motion analysis, MxAnalytics
Interfaces
Ethernet 10/100, IPv4/IPv6, MiniUSB;
audio, inputs/outputs and RS232 with optional accessory
Security
User/group management, HTTPS/SSL, IP address lter,
IEEE 802.1x, intrusion detection, digital image signature,
MxFFS
Certications
EN55022:2010; EN55024:2010; EN50121-4:2006;
EN61000-6-1:2007; EN 61000-6-2:2005; EN61000-6-
3:2007+A1:2011; EN61000-6-4:2007+A1:2011; AS/ NZS
CISPR22:2009+A1:2010; CFR47 FCC part15B
Power Supply PoE (IEEE 802.3af)
Power Consumption Typ. 3,3 W
Protection Classes IP66
IK10
Ambient
Temperature –30 to 50 °C/–22 to 122°F
Dimensions/Weight Diameter x Height: 160 x 86 mm; weight: approx. 350 g
Standard Delivery
Housing (high-resistance composite, PBT), white , shock-re-
sistant dome (transparent), mounting supplies , wrenches,
50 cm patch cable, MicroSD card (installed)
Drilling Templates
100mm/3.94in
Dia.
5.5mm/0.22in
100mm/3.94in
141.4 mm/5.57 in
Installation with mounting ring
(without accessories)
Manuals and drilling templates: www.mobotix.com > Support > Manuals > IP Camera Systems > Dome D26
Camera
without
accessories
Outdoor Wall Mount
Important Notes
1.Safety Warnings
Notes on Installing:
• This product must not be used in locations exposed to
the dangers of explosion.
• Make sure that you install this product as outlined in
Chapter 2, «Installation» of the corresponding manual.
A faulty installation can damage the camera!
• When installing this product, make sure that youare only
using genuine MOBOTIX parts and MOBOTIXconnection
cables.
• Only install this product on suitable, solid materialsthat
provide for a sturdy installation of the xing elements
used.
Electrical installation: Electrical systems and equipment may
only be installed, modied and maintained by a qualied
electrician or under the direction and supervision of a qualied
electrician in accordancewith the applicable electrical guide-
lines. Make sure to properly set up all electrical connections.
Electrical surges: MOBOTIX cameras are protected against
the eects of small electrical surges by numerous measures.
These measures, however, cannot prevent the camera from
being damaged when stronger electricalsurges occur. Special
care should be taken when installing the camera outside of
buildings to ensure proper protectionagainst lightning, since
this also protects the building and the whole network infra-
structure.
Never touch the lens: Due to the high performance of the
D25, the area of the image sensor can getquite hot, especially
when the ambient temperature is also high. This does not
aect the proper functioning of the camera in any way. For
this reason, the product must not be installedwithin the reach
of persons without the dome.
Power o before opening the camera: Make surethe power
supply to the camera is disconnectedbefore opening the cam-
era housing (e.g., when inserting or exchanging lenses, lens
units and SD cards).
Network security: MOBOTIX products include all of the nec-
essary conguration options for operation in Ethernet net-
works in compliance with data protectionlaws. The operator
is responsible for the data protectionconcept across the entire
system. The basic settings required to prevent misuse canbe
congured in the soware and are password-protected. This
prevents unauthorized parties from accessingthese settings.
2.Legal Notes
Legal aspects of video and sound recording: You must comply
with all data protection regulationsfor video and sound mon-
itoring when using MOBOTIX products. Depending on national
laws and the installation location of the D25, the recording of
video and sound data may be subject to special documentation
or it may be prohibited. All users of MOBOTIX products are
therefore requiredto familiarize themselves with all applicable
regulations and to complywith these laws. MOBOTIX AG is not
liable for any illegal use of its products..
3.Disposal
Electrical and electronic products contain many valuable
materials. For this reason, we recommend that you dispose
of MOBOTIX products at the end of their service life in accor-
dance with all legalrequirements and regulations (or deposit
these products at a municipal collection center). MOBOTIX
products must not be disposed of in household waste! If the
product containsa battery, please dispose of the battery sep-
arately (the corresponding product manuals contain specic
directions if the product contains a battery).
4.Disclaimer
MOBOTIX AG does not assume any responsibility fordamages,
which are the result of improper use or failureto comply to the
manuals or the applicable rules and regulations. Our General
Terms and Conditions apply. You can download the current
version of the General Terms and Conditions from our web-
site at www.mobotix.com by clicking on the COS link at the
bottom of every page.
§
§
Boot Options of the D26
By default, the camera startsas DHCP client and automatically tries to get
an IP address from a DHCP server. To start the camera in a mode dierent
from the default mode, you can activate the boot menu of the camera.
1.Preparing the Camera
• Remove the outer shell and the dome.
• Disconnect the camera's power supply.
• Reconnect the power supply of the camera.
2.Activating the Boot Menu
The red LED lights up 5 to 10 seconds aer esta -
blishing the power supply and will stay on for
10 seconds. Briey press the "R" key indicated
by the red circle in the gure. The camera enters
the boot menu, ready for selecting one of the
boot options.
The LED now ashes once and repeats the ash signal aer pausing for one
second (the number of ashes indicates the current boot option). To go
to the next boot option, briey press the "R" key again (< 1 sec). Aer the
last boot option, the camera returns to the rst option (LED ashes once).
LED
ashes
Boot
Option Meaning Audio Conrmation*
1 x Auto Con-
guration
Starts the auto conguration in order to
operate this camera as a door station (not
supported on all camera models).
Phone ringing
2 x Factory
Defaults
Starts the camera with factory defaults
(factory default IP address, users and
passwords will not be reset).
Boing
3 x Automatic IP
Address
Starts the camera as DHCP client and
tries to obtain an IP address from a DHCP
server. If a DHCP server cannot be found or
no IP address can be obtained, the camera
starts with its factory default address.
Boing Boing
4 x Recovery
System
Starts the camera with the recovery sys-
tem, e.g., in order to recover from a failed
update of the camera soware.
Alarm Sound
*Audio on D26 only in connection with ExtIO (MOBOTIX Accessory).
3.Selecting a Boot Option
Press the "R" key longer (> 2 sec). The camera conrms the selection by
ashing rapidly three times. Aer 20 sec, the camera will conrm the selec-
tion by playing a sound accordingto the table above. If nothing is selected,
the camera will resume its normal boot process aer a certain time.
The outer shell and the dome can be mounted again.
On-Wall Set/
On-Wall Set 10°
CavityWallInstallation Set