4/126 ũ02%27,;$*š6HFXULW\9LVLRQ6\VWHPVš0DGHLQ*HUPDQ\ZZZPRERWL[FRPšVDOHV#PRERWL[FRPD14D Camera Manual: Contents
2YHUYLHZ2I1HWZRUN&RQQHFWLRQ6
2.2.1 Power over Ethernet (PoE Conforming to IEEE 802.3af) 46
2.2.2 Uninterruptible Power Supplies (UPS) 47
2.2.3 Providing The Camera Connections, Wall Outlets 47
2.2.4 Wiring, Fire Prevention, Lightning And Surge Protection 48
2.3 First Installation Steps 50
2.3.1 Mounting Lens Units 50
2.3.2 Overview Of Cable Connections 54
2.3.3 Connecting Ethernet Cable With The PatchBox 55
2.3.4 Connecting The Mini USB Cable 55
2.3.5 Connecting MxBus Modules 57
2.3.6 Replacing The MicroSD Card 58
0RXQWLQJ7KH&DPHUD:LWK2XWGRRU:DOO0RXQW0
2.4.1 Aiming The Passive Infrared Sensor (PIR) 60
2.4.2 Mounting The Outdoor Wall Mount 61
2.4.3 Aiming The Camera 63
2.4.4 Connecting The Camera With Bottom Plate 64
2.4.5 Connecting And Securing The Camera 65
0RXQWLQJ7KH&RUQHU$QG3ROH0RXQW6
2.5.1 Overview 66
2.5.2 Mounting To The Corner Of A Building 67
2.5.3 Mounting To A Pole 68
2.5.4 Mounting The Outdoor Wall Mount 69
$GMXVWLQJ7KH/HQV0
1HWZRUN$QG3RZHU&RQQHFWLRQ2
2.7.1 Notes On Cable Lengths And Power Supply 72
2.7.2 PoE Variables 72
2.7.3 Power Supply Using A Switch 73
2.7.4 Power Supply When Connected Directly To A Computer 74
2.7.5 Power Supply With Power-Over-Ethernet Products 74
2.7.6 Camera Startup Sequence 75
2SHUDWLQJ7KH&DPHUD6
3.1 Manual And Automatic Operation – Overview 76
3.1.1 Manually Using A Computer In The 10.x.x.x IP Address Range 77
3.1.2 Automatically Using MxControlCenter Or MxEasy 78
3.1.3 Automatically Using DHCP 79
)LUVW,PDJHV$QG7KH0RVW,PSRUWDQW6HWWLQJV0
3.2.1 Manually Setting Up The Network Parameters In A Browser 80
3.2.2 First Images And The Most Important Settings In The Browser 82
3.2.3 First Images And Network Parameter Configuration In MxControlCenter 84