Mobotix MOBOTIX M73 Instruction Manual

Guideline
MOBOTIXThermal-Heat-Detection App
©2022MOBOTIX AG
V1.04_11/18/2022, Order Code: Mx-APP-MX-THD

Table of Contents
Table of Contents
Table of Contents 2
Before You Start 5
Support 6
Safety Notes 6
Legal Notes 7
About MOBOTIXThermal-Heat-Detection App 8
Smart Data Interface to MxManagementCenter 8
Technical Specifications 10
Hardware Requirements 12
MOBOTIX M73 12
MOBOTIX M73 Sensors and Accessories 12
MOBOTIX S74 13
MOBOTIX S74 Sensors and Accessories 13
Connecting the Camera 15
S74 - Connection Scheme 15
Connecting the Outputs 16
M73 - Connection Scheme 16
Connecting the Outputs 17
Licensing Certified Apps 18
License Activation of Certified Apps in MxManagementCenter 18
Managing Licenses in MxManagementCenter 22
Camera Software Configuration 25
Installing the MOBOTIXThermal-Heat-Detection App 25
Activating the USB Output 26
Setting the Signal Out Profiles 27
Setting the default Output 28
Activation of the Certified App Interface 29
Configuration of MOBOTIXThermal-Heat-Detection App 30
Detection Area Settings 31
Drawing a Polygon Area in the Live View 33
Storing the Configuration 33
MxMessageSystem 34
What is MxMessageSystem? 34
Facts about MxMessages 34
2 / 42

Basic configuration: Processing the automatically generated app events 35
Checking automatically generated app events 35
Action handling - Configuration of an action group 36
Action settings - Configuration of the camera recordings 38
Advanced Configuration: Processing the meta data transmitted by apps 39
Meta data transferred within the MxMessageSystem 39
Creating a Custom Message Event 39
Examples for message names and filter values of the MOBOTIXThermal-Heat-Detection App 41
Table of Contents
3 / 42


Before You Start
Support
Support
If you need technical support, please contact your MOBOTIX dealer. If your dealer cannot help you, he will
contact the support channel to get an answer for you as quickly as possible.
If you have internet access, you can open the MOBOTIX help desk to find additional information and software
updates. Please visit:
www.mobotix.com > Support > Help Desk
Safety Notes
nThis product must not be used in locations exposed to the dangers of explosion.
nDo not use this product in a dusty environment.
nProtect this product from moisture or water entering the housing.
nInstall this product as outlined in this document. A faulty installation can damage the product!
nThis equipment is not suitable for use in locations where children are likely to be present.
nWhen using a ClassI adapter, the power cord shall be connected to a socket-outlet with proper ground
connection.
nTo comply with the requirements of EN50130-4 regarding the power supply of alarm systems for 24/7
operation, it is highly recommended to use an uninterruptible power supply (UPS) for backing up the
power supply of this product.
nThis equipment is to be connected only to PoE networks without routing to other networks.
NOTE! Observe the MOBOTIX MOVE Installation Hints document to ensure optimum performance of the
camera features.
6 / 42

Legal Notes
Legal Aspects of Video and Sound Recording
You must comply with all data protection regulations for video and sound monitoring when using MOBOTIX
AG products. Depending on national laws and the installation location of the cameras, the recording of video
and sound data may be subject to special documentation or it may be prohibited. All users of MOBOTIX
products are therefore required to familiarize themselves with all applicable regulations and to comply with
these laws. MOBOTIX AG is not liable for any illegal use of its products.
Declaration of Conformity
The products of MOBOTIX AG are certified according to the applicable regulations of the EC and other coun-
tries. You can find the declarations of conformity for the products of MOBOTIX AG on www.mobotix.com
under Support> Download Center> Marketing &Documentation>Certificates & Declarations of Con-
formity.
RoHS Declaration
The products of MOBOTIX AG are in full compliance with European Unions Restrictions of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment (RoHS Directive 2011/65/EC) as far as they are
subject to these regulations (for the RoHS Declaration of MOBOTIX, please see www.mobotix.com, Support>
Download Center> Marketing &Documentation>Brochures & Guides> Certificates).
Disposal
Electrical and electronic products contain many valuable materials. For this reason, we recommend that you
dispose of MOBOTIX products at the end of their service life in accordance with all legal requirements and reg-
ulations (or deposit these products at a municipal collection center). MOBOTIX products must not be dis-
posed of in household waste! If the product contains a battery, please dispose of the battery separately (the
corresponding product manuals contain specific directions if the product contains a battery).
Disclaimer
MOBOTIX AG does not assume any responsibility for damages, which are the result of improper use or failure
to comply to the manuals or the applicable rules and regulations. Our General Terms and Conditions apply.
You can download the current version of the General Terms and Conditions from our website at www.-
mobotix.com by clicking on the corresponding link at the bottom of every page.
Before You Start
Legal Notes
7 / 42

About MOBOTIXThermal-Heat-Detection App
Smart Data Interface to MxManagementCenter
About MOBOTIXThermal-Heat-Detection
App
MOBOTIX Thermal Heat Detection App
Approved by the CNPP. Suitable for early fire detection and reliable monitoring of critical areas. Monitor mul-
tiple temperature ranges with high accuracy on a single camera image and define different escalation levels.
Connection to existing systems and integration into projects is a breeze.
nExtension of the temperature measurement functions of MOBOTIX Thermal Radiometry cameras
(according to CNPP France 19005 certification)
nDefinition of up to 20 temperature measurement areas within the field of view of the camera
nIndividual calibration of each temperature measurement area (e.g. emissivity values)
nTemperature events when defined temperature thresholds are exceeded
nDetection of physical manipulation of the thermal sensor (e.g. covering the sensor )
nMOBOTIX events via MxMessageSystem
nRequired for the installation of a CNPP-certified thermal camera
Best suited for the requirements of the following industries:
Utilities, Energy & Mining; Industry & Production, Government, Traffic & Transportation, Retail, Healthcare,
Education & Science
NOTE! The Mobotix MOBOTIXThermal-Heat-Detection App is designed to detect temperature according to
the CNPP Technical Specifications ST-LPMES-DEC.19.005 (01/02/2019)
NOTE! This app can only be used with thermal sensors in linear operating mode. If an event profile is
defined for a sensor that is either not a thermal sensor or is not in linear mode, the corresponding defin-
ition has no effect. If supported by the thermal sensor, you can activate the linear mode in the Thermal
Sensor Settings of the camera.
Smart Data Interface to MxManagementCenter
This app has a Smart Data interface to MxManagementCenter.
With the MOBOTIX Smart Data System, transaction data can be linked to the video recordings made at the
time of the transactions. Smart Data source can be e.g. MOBOTIX Certified Apps (no license required) or gen-
eral Smart Data sources (license required) like POS systems or license plate recognition systems.
8 / 42

The Smart Data System in MxManagementCenter enables you to quickly find and review any suspicious activ-
ities. The Smart Data Bar and the Smart Data View are available for searching and analyzing transactions. The
Smart Data Bar provides a direct overview of the most recent transactions (from the last 24 hours) and for
this reason it is convenient to use it for reviews and searches.
NOTE! For information on how to use the Smart Data System, see the corresponding online help of the
camera software and MxManagementCenter.
Fig. 1: : Smart Data Bar in MxManagementCenter (Example: POS System)
About MOBOTIXThermal-Heat-Detection App
Smart Data Interface to MxManagementCenter
9 / 42

Technical Specifications
Smart Data Interface to MxManagementCenter
Technical Specifications
Product Information
Product Name MOBOTIXThermal-Heat-Detection App
Supported
MOBOTIX Cameras
M73 (Thermal Radiometry Sensor required)
Minimum Camera Firmware V7.3.1.x
MxManagementCenter
Integration
nmin. MxMC v2.7
nAdvanced Config license required
nEvent Search: Smart Data Interface license included
MOBOTIX HUB com-
patibility
nmin. MOBOTIX HUB version: 2021 R1
nmin. MOBOTIX HUB license level for Analytics Events: L2
nmin. MOBOTIX HUB license level for MOBOTIX Event Search Plug-In : L4
Trial license 30-day trial license pre-installed
Product Features
App Features nExtension of the temperature measurement functions of MOBOTIX
Thermal Radiometry cameras (CNPP 19005 compliant)
nDefinition of up to 20 temperature measurement areas within the field of
view of the camera
nindividual calibration of each temperature measurement area (e.g.
emissivity values)
nTemperature events when defined temperature thresholds are exceeded
nDetection of physical manipulation of the thermal sensor (e.g. sensor
covered)
nMOBOTIX events via MxMessageSystem
Maximum number of meas-
urement areas
20
Supported thermal sensor
types
Thermal Radiometry
Dual / Multi Sensor usage Yes
10 / 42

MxMessageSystem sup-
ported
Yes
Integration Interfaces nMilestone X-Protect (via XML)
nGeneric 3rd party integration through XML, JSON and MODBUS/TCP
MOBOTIX events Yes
ONVIF Events Yes (Generic Message events)
Scene Requirements for Object Recognition
Recommended camera position no restrictions
Technical App Specifications
Synchronous /
Asynchronous App
Asynchronous
Detection accuracy Depending on the thermal sensor module used
Simultaneous execution of
other apps
Yes (depending on performance expectations)
Technical Specifications
Smart Data Interface to MxManagementCenter
11 / 42

Hardware Requirements
MOBOTIX M73
Hardware Requirements
CAUTION! To be compliant with CNPP 19005 Certification, no sensor cable length should exceed 3m
NOTE! Only Thermal Radiometry sensors can be used for this application
MOBOTIX M73
The MOBOTIX M73 camera with TR sensor, the associated app and certified power supply unit is
CNPP-certified and can be integrated into a fire alarm system. If you already have an M73
installed, you can simply upgrade the components and install the MOBOTIXThermal-Heat-
Detection App - done. Additional optical sensors can also be used in the same device without
invalidating the certification.
nDetects fires even before they occur
nUp to 20 measurement windows simultaneously from up to 72 m away
nAny number of escalation levels
nMakes fire sources and embers visible even when smoke and steam make visibility impossible
nWorks even in total darkness
Order Number Description
Mx-M73A-LSA M73 Body with LSA Connector Box (white)
Mx-M73A-LSA-wg M73 Body with LSA Connector Box (white-gray)
Mx-M73A-RJ45 M73 Body with RJ45 Connector Box (white)
Mx-M73A-RJ45-wg M73 Body with RJ45 Connector Box (white-gray)
MOBOTIX M73 Sensors and Accessories
Order Number Description
Mx-O-M73TB-336R100 Thermal module 336-R100 with front plate for M73 (B model)
Mx-O-M73TB-336R150 Thermal module 336-R150 with front plate for M73 (B model)
12 / 42

Order Number Description
Mx-O-M73TB-336R280 Thermal module 336-R280 with front plate for M73 (B model)
Mx-O-M73TB-640R050 Thermal module 640-R050 with front plate for M73 (B model)
Mx-O-M73TB-640R080 Thermal module 640-R080 with front plate for M73 (B model)
Mx-O-M73TB-640R100 Thermal module 640-R100 with front plate for M73 (B model)
Mx-O-M73TB-640R150 Thermal module 640-R150 with front plate for M73 (B model)
MOBOTIX S74
Like the M73, existing systems can be converted into a CNPP-certified fire detector via app and
with a suitable thermal sensor, even if this designation does not quite do justice to its per-
formance. With its versatile connections and sensor housings, however, the MOBOTIX S74 scores particularly
well in complex spatial conditions and wherever a single viewing angle is simply not enough.
nDetects fires even before they occur
nUp to 20 measurement windows simultaneously from up to 72 m away
nAny number of escalation levels
nMakes fire sources and embers visible even when smoke and steam make visibility impossible
nWorks even in total darkness
Order Number Description
Mx-S74A S74 Body for 4 Sensor- and Functional Modules
Mx-F-S7A-RJ45-VDC S74 RJ45 Network slide in board with 12/24 VDC Power Supply
Mx-F-S7A-INT01 S74 IO Slide in Board
MOBOTIX S74 Sensors and Accessories
Order Number Description
Mx-O-M7SB-336RP100 S7x PTMount Thermal 336-R100 (B model)
Mx-O-M7SB-336RP150 S7x PTMount Thermal 336-R150 (B model)
Mx-O-M7SB-336RP280 S7x PTMount Thermal 336-R280 (B model)
Mx-O-M7SB-336RS100 S7x Thermal Module 336-R100 (B model)
Hardware Requirements
MOBOTIX S74
13 / 42

Hardware Requirements
MOBOTIX S74
Order Number Description
Mx-O-M7SB-336RS150 S7x Thermal Module 336-R150 (B model)
Mx-O-M7SB-336RS280 S7x Thermal Module 336-R280 (B model)
Mx-O-M7SB-640RP050 S7x PTMount Thermal 640-R050 (B model)
Mx-O-M7SB-640RP080 S7x PTMount Thermal 640-R080 (B model)
Mx-O-M7SB-640RP100 S7x PTMount Thermal 640-R100 (B model)
Mx-O-M7SB-640RP150 S7x PTMount Thermal 640-R150 (B model)
Mx-O-M7SB-640RS050 S7x Thermal Module 640-R050 (B model)
Mx-O-M7SB-640RS080 S7x Thermal Module 640-R080 (B model)
Mx-O-M7SB-640RS100 S7x Thermal Module 640-R100 (B model)
Mx-O-M7SB-640RS150 S7x Thermal Module 640-R150 (B model)
14 / 42

Connecting the Camera
Please refer to the additional technical documents for the CNPP compliant cameras, especially the Technical
Specifications and the Installation Instructions:
Camera Technical Specifications Quick Installation Guide
M73 https://www.mobotix.com/media/2979 https://www.mobotix.com/media/3068
S74 https://www.mobotix.com/media/3691 https://www.mobotix.com/media/3694
CAUTION! To be compliant with CNPP 19005 Certification, a PoE+ power source according to EN54-4 is
mandatory.
CAUTION! To be compliant with CNPP 19005 Certification, no sensor cable length should exceed 3m
NOTE! Only Thermal Radiometry sensors can be used for this application
S74 - Connection Scheme
Optical sensor is optional.
Connecting the Camera
S74 - Connection Scheme
15 / 42

Connecting the Camera
M73 - Connection Scheme
Fig. 2: CNPP compliant installation of the MOBOTIX S74
Connecting the Outputs
Fig. 3: CNPP compliant connection to the S74 Camera
nThe Output for error messages must be connected to Slot 1 ① of the S74.
nThe Ouput for alarm trigger must be connected to the USB OUT ②connector of the S74.
M73 - Connection Scheme
Optical sensor is optional.
Fig. 4: CNPP compliant installation of the MOBOTIX M73
16 / 42

Connecting the Outputs
Fig. 5: CNPP compliant connection to the M73 Connector Box RJ45
nThe Output for error messages must be connected to the Line Out of the M73 Connector Box RJ45.
nThe Ouput for alarm trigger must be connected to the USB OUT connector of the M73 Connector Box
RJ45.
Connecting the Camera
M73 - Connection Scheme
17 / 42

Licensing Certified Apps
License Activation of Certified Apps in MxManagementCenter
Licensing Certified Apps
The following licenses are available for the MOBOTIXThermal-Heat-Detection App:
n30-day test license pre-installed
npermanent commercial license
The usage period begins with activation of the app interface (see )
NOTE! For buying or renewing a license, contact your MOBOTIX Partner.
NOTE! Apps are usually pre-installed with the firmware. In rare cases, apps must be downloaded from the
website and installed. In this case see www.mobotix.com > Support > Download Center > Marketing &
Documentation, download and install the app.
License Activation of Certified Apps in
MxManagementCenter
After a test period commercial licenses must be activated for use with a valid license key.
Online-Activation
After receiving the activation IDs, activate them in MxMC as follows:
1. Select from the menu Window > Camera App Licenses.
2. Select the camera on which you want to license apps and click Select.
18 / 42

Fig. 6: Overview of Camera App Licenses in MxManagementCenter
NOTE! If necessary, correct the time set on the camera.
1. An overview of the licenses installed on the camera may be displayed. Click Activate License.
Fig. 7: Overview of the licenses installed on the camera
NOTE! If necessary, correct the time set on the camera.
2. Enter a valid Activation ID and specify the number of licenses to install on this computer.
3. If you want to license another product, click on . In the new row, enter the appropriate Activation ID
and the number of licenses you want.
Licensing Certified Apps
License Activation of Certified Apps in MxManagementCenter
19 / 42

Licensing Certified Apps
License Activation of Certified Apps in MxManagementCenter
4. To remove a line click .
5. When you have entered all Activation IDs, click Activate License Online. During activation, MxMC con-
nects to the license server. This requires an Internet connection.
Fig. 8: Adding licenses
Successful activation
After successful activation, a new log in is required to apply the changes. Alternatively, you can return to
license management.
Failed activation (missing internet connection)
If the license server cannot be reached, e.g. due to a missing internet connection, apps can also be activated
offline. (see Offline Activation, p. 20).
Offline Activation
For offline activation, the partner/installer from whom you purchased the licenses can generate a capability
response (.bin file) on the license server to activate their licenses.
1. Select from the menu Window > Camera App Licenses.
2. Select the camera on which you want to license apps and click Select.
20 / 42
Other manuals for MOBOTIX M73
3
This manual suits for next models
4
Table of contents
Other Mobotix Thermal Camera manuals