·Do NOT remove tape!
·For indoor use only.
·For use on a normally dry work surface.
·If any malfunction occurs, do not attempt to disassemble or
repair.
·Avoid placing the charger in a high temperature environment
or near fire.
!!
·6 ft. cord length.
·USB-A and USB-C ports are for charging use only.
·Table thickness is 3/4"MIN. to 1-11/16" MAX.
·Plug dimension is 1-11/32" X 1-1/32" X 7/8".
·Please use applicable adapter from data tree.
. . . . . . . . . . . 1X Wire Manager
. . . . . . . . . . . . 1X PCS36A/UC
. . . . . . . . . . . . . 2X Metal Clip
TABLE OF CONTENTS
SPECIFICATIONS
WARNING
. . . . . . . . . . . . 2X Wing Clamp
21
Make a cutout in the desired location on your work surface.
Cut the hole at 5" X 4". Allow enough clearance for unit
operation. DO NOT place unit where cable is strained or
trapped.
Place metal clips near the ends of the back of the unit.
(NOTE: Metal clips are for use in hard surface material only as
an optional mounting means.)
3-19/32"
4-29/32"
(5" CUTOUT) 7/32"7/32"
3/32"
3-15/16"
(4" CUTOUT) 1/4"1/4"
1-13/32"
SIDE VIEWFRONT VIEW
4" 5"
Metal clip
310.318.2491 • 800.523.1269 • www.mockett.com
DOUG MOCKETT & COMPANY, INC.
PCS36A/UC PROPRIETARY AND CONFIDENTIAL.
ALL DIMENSIONS HAVE A +/- 1/16" TOLERANCE UNLESS OTHERWISE SPECIFIED. WE DO NOT RECOMMEND DRILLING OR
CUTTING ANY HOLES BEFORE RECEIVING A PRODUCT OR A PRODUCT SAMPLE.
2023.09.22 1