
IPStecker
Procontrol 5
Safety Precautions
Please read this guide before installing and
using the device. Please use the device
properly and as described in the following
manual.
The guarantee is insured only if the device is
used with the implements approved or
specified by the manufacturer, and it is
cleaned and maintained as described in this
guide.
The authors are NOT liable for any claim,
damages or other liability out of:
- using not the proper way
- incorrect installation
- connecting to inappropriate electronic
network
- incorrect maintenance
- not approved modifications,
interventions
- using non-original elements
- using with implements not approved
or specified by the manufacturer
Only the technical service authorized by the
manufacturer is allowed to do interventions in
the device.
Maximum number of connectable devices
using switching power supply is 2/socket!
Do not try to modify or dismount any part of
the device
Do not store and operate the device out of the
given ranges
Only use the device the proper way as
described in guide.
Do not store the device close to a heat source
or direct flame, because the device may
explode
Never allow water or any other foreign matter
to get into the unit. The unit contains sensitive
electronic parts, so water and foreign matter
not only can cause malfunction, they also
create the risk of overheating due to short
circuiting and insulation failure, fire and
smoke, combustion, and electric shock. Should
water or foreign matter ever get into the unit,
immediately turn off the unit and contact a
qualified service person.
Only use the product for it’s intended purpose!
Security
Keep the device in operation only from
electric sources defined in this user manual.
Do not open the device, there are no user
serviceable parts inside!
Attention! Connect the product exclusively
to a grounded power outlet with relay
contact protection network.
To avoid fire and risk of electronic shock:
Beware that your children do not throw or
push objects through the slots of the device.
Do not mount accessories or attachments on
the device that are not designed for this
device. If you do not use the device for longer
time or in case of lightning, you shall unplug
the power cord.
Risks at Installation
Do not store anything on the power cord. Do
not place the device, where the power cord can
be damaged. Do not use the device under wet
circumstances or in humid premises.
Cleaning
Switch off the device before cleaning. Use
slightly wet mop. Excessive humidity may
cause electric shock.
General rights and responsibility
Manufacturing rights of this device are
reserved by Procontrol Electronics Ltd.
Modifying or copying of this device or parts is
prohibited!
Procontrol Ltd. reserves the right to modify
this documentation without prior notice
Procontrol Ltd. is not liable for using of this
device and the consequences of the
application.