MoDRN Refined Industrial Atoll HYN-ALLNGE-TN User manual

1/5
model# HYN-ALLNGE-TN
UPC 677446153296
model# HYN-ALLNGE-BR
UPC 677446153302
Lot# ________
Date________
Customer Service:
1.877.436.7290
[email protected]
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
ax beige/charcoal gray
caramel brown/charcoal gray
Manufactured By:
BDDMI
1321 Tyler St NE, Minneapolis, MN 55413
Assembly Instructions
MŌDRN Rened Industrial Atoll Metal Base Lounge Chair

2/5
QTY: 1
QTY: 2
QTY: 1
• Please read through this instruction before beginning assembly.
• Two adults assembly is recommended.
• Clear out the space for assembly and lay out all parts base on Parts List, extra room will allow
you to easily determine if all the pieces are present.
• Save all packing materials until assembly is complete to avoid accidentally discarding smaller
parts or hardware.
• Keep small parts and pieces away from children until fully assembly.
• Please check for any loose screws and tighten them before you use.
PRE-ASSEMBLY PREPARATION:
PARTS LIST:
DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT
DUE TO THE POSSIBLE RISK OF FINGER ENTAPMENT
Chair (B)
Leg (C)
Cushion (A)

3/5
QTY: 16 QTY: 1
HARDWARE LIST:
M6*25mm Bolt (H1) Allen Wrench (H2)

4/5
1
2
STEP-BY-STEP ASSEMBLY:
STEP 1: Make sure the bolts go through the pre-drilled holes properly. Do not over
tighten bolts.

5/5
5
250 lbs. / 113.4 kg.
Furniture Care Instructions:
Dust with clean, lint-free cloth.
Use furniture spray polish as needed.
Customer Service:
877.436.7290
[email protected]
PRINTED IN: China
• Your complete satisfaction is our number 1 priority. Our product is designed and manufactured to
meet the highest quality of standards. In the event that you have assembly questions, or parts are
missing or damaged, our customer service department would appreciate the opportunity to assist
you.
• Warranty available to original purchaser only . Proof of purchase is required . This warranty is your
sole remedy for product defect and does not cover damage due to mishandling, misuse or abuse.
The manufacturer is not responsible for incidental or consequential damages. Please contact our
Customer Service at 1-877-436-7290 to obtain information on warranty performance. This
warranty gives you specic legal rights and you may also have other rights which vary from State
to State.
PRE-ASSEMBLY PREPARATION:
WARNING: Do not exceed the maximum load capacity. Exceeding
the maximum load capacity may result in collapse and possible injury.