Moen ACC9964 Series User manual

方形LED化妆镜
安装步骤：
LED化妆镜
LED Mirror
ACC9964系列
卫浴产品以精湛的技术制造而成，
。
。
。
INS12166 - 08/30
摩恩产品是在高质量标准及生产工艺下制造的，摩
恩承诺为消费者购买的洁具产品提供有期限免费保
修及终身维修服务。
化妆镜免费保修期为1年，均自消费者购买日（以
摩恩产品分销商开具的发票或收据上载明日期为准
）起计。
免费保修范围为产品及产品配件由于材质及工艺原
因而造成的故障或损坏。免费保修期内，我们将无
偿为您提供修理服务及更换发生故障的产品或产品
配件。摩恩的售后服务责任仅限于对故障产品的修
理，而不延及您因产品故障而发生的其他损失，法
律另有规定的除外。
您需了解：产品外观碰伤、刻划痕迹，以及滥用及
不正当保养所导致的故障或损坏，均不属于免费保
修范围。即使在免费保修期内，属下列
（1）-（5）情况之一的，需酌情收取修理费用：
1. 不能出示相符的保修卡和有效购买凭证情况的，
2. 未按使用说明书告知的使用方法和注意事项造成
的故障，
3.自行拆卸、维修、改装所造成的故障和损坏，
4.由于不可抗力等外部原因引起的故障和损坏，
5.由于运输、搬卸、挤压等造成的损坏。
对于保修期外或不在保修范围内的产品，如需维修
，摩恩将酌情收取上门费、人工费及材料费。
本保修条款仅对原始消费者和酒店行业的购买者有
效，并不适用于本产品在工业，商业，贸易和非酒
店行业的使用。
如对本保修条款内容有任何疑问，请拨打400 630
8866 咨询热线，或向当地分销商咨询。

Rectangle LED Mirror
1. Drill mounting holes.
Note: When embedding the cable, ensure that the
opening diameter is sufficient to place the wiring
terminal.
2. Install the base.
3. Connect the power cord.
Fire wire (L) / Brown
Ground wire / Green
Zero wire (N) / Blue
Embedded
power cord
LED化妆镜
LED Mirror
ACC9964 series
MOEN LIMITED WARRANTY
We offer limited warranty and lifetime maintenance for
Moen products, which are all manufactured with high
standards of workmanship.
The period of warranty shall start from the date of
purchase of the product (according to the invoice or
receipt issued by Moen distributors) and shall cover a
period of the following: the warranty period for
mirror is 1 year.
This warranty is your coverage against material and
workmanship malfunction or defects in Moen products
or components. During the warranty period, we offer free
maintenance and changing of malfunctioned products or
product components. Moen’s after sales service liability
is limited to the maintenance of faulty items and does not
cover your other losses caused by product malfunction,
except for otherwise stipulated by law.
Cosmetic damages (scratches, dents, etc.) and
malfunction or defects caused by abuse or improper
maintenance is not covered by this warranty.
Although the warranty period remains valid, in case of
the following conditions (1) - (5), the maintenance cost
(material cost and labor cost) shall still be charged as
the case may be:
1. Corresponding warranty card and valid invoice cannot
be presented;
2. Faults were caused by the incompliance with the
instructions and precautions provided in the user’s
manual;
3. Damages and faults were caused by self-actuated
dismantling, repair and refit;
4. Faults and damages were caused by external factors
such as force majeure;
5. Damages were caused by transportation, unloading
and extrusion, etc.
This warranty is valid for the original consumers only
(including hotel use), and excludes industrial and
commercial use of the product (except for hotel use). This
card is only responsible for product maintenance rather
than any other liabilities.
In the event that the product requires maintenance but
exceeds the warranty period, or that the product is not
covered by this warranty, labor cost and material cost
shall be charged as thecase may be.
Please call 400-630-8866 or contact local dealer for any
question.
INS12166 - 08/30