ReTrak VS001 User manual

READ AND FOLLOW THIS OWNERS MANUAL CAREFULLY FOR
PROPER USE AND MAINTENANCE OF THIS PRODUCT. PLEASE
KEEP THIS MANUAL FOR FUTURE REFERENCE.
IMPORTANT
•Do not use Sleep Mask if it has been damaged in any way.
•Do not use this product for anything other than its
intended use.
•Keep out of reach of children. This product is not a toy.
•Do not place Sleep Mask on or near hot surface.
CHARGING BLUETOOTH SLEEP MASK:
To charge Bluetooth Sleep Mask, connect the supplied charging
cable to the Micro USB charging port and connect the other
end to a USB power outlet (5V adapter not included). While
charging, the LED will turn red. When the battery is fully
charged, the RED LED light will turn OFF.
OPERATING BLUETOOTH SPEAKER:
•To turn power ON, hold down Power Button for 3 seconds
until you hear a sound. To turn power OFF, repeat this step.
•The Sleep Mask is ready to pair and is discoverable when the
blue light blinks rapidly. Scan from your Bluetooth enabled
device for“Retrak Sleep Mask” and pair it. Once the pairing
has been completed, LED lights will stop blinking. Your Sleep
Mask is now ready for use with your device.
•To adjust the volume control, long press (volume down)
or (volume up) on the speaker control panel.
•To change tracks, short press (for previous tracks) or
(for next track) on the speaker control panel.
•To pause a track, press on speaker control panel.
•To prolong battery life, turn power OFF when Sleep Mask
is not in use.
CARE & MAINTENANCE:
Do not machine wash. Spot clean only.
QUESTIONS or COMMENTS
For questions or comments regarding this or other ReTrak
products, please call our toll-free number: 1-877-499-6072. Visit
our website at www.myretrak.com or email us at support@
myretrak.com. If problems persist, please do not attempt to
repair unit; see warranty for factory service.
PREVIOUS/
VOLUME DOWN
POWER BUTTON
PLAY/PAUSE
NEXT/VOLUME UP
CHARGING PORT
WARRANTY
Emerge Technologies, Inc. Limited Warranty Statement.
Complete information regarding Emerge’s warranties is listed
below.
EMERGE TECHNOLOGIES, INC. (“Emerge”) warrants to the
original end user customer of its products specied below
that its products are free from Material Defects as dened
herein. Subject to the conditions and limitations set forth
below, Emerge will, at its option, either repair or replace any
part of its products that prove materially defective by reason
of improper workmanship or materials. Material Defects are
herein dened as non-cosmetic defects in a product’s materials
and workmanship which cause a malfunction in the product
during proper use. Repaired parts or replacement products
will be provided by Emerge on an exchange basis, and will be
either new or refurbished to be functionally equivalent to new.
If Emerge is unable to repair or replace the product, Emerge
will, at its option, refund or credit the current value of the
product at the time the warranty claim is made or substitute an
equivalent product. Exceptions to Warranty Notwithstanding
any other provision contained herein, this limited warranty
does not cover any damage to a product that results from
improper installation, accident, abuse, misuse, natural disaster,
insucient or excessive electrical supply, abnormal mechanical
or environmental conditions, or any unauthorized disassembly,
repair, or modication. This limited warranty also does not apply
to any product on which the original identication information
has been altered, obliterated or removed, has not been
handled or packaged correctly, has been sold as secondhand
or has been resold contrary to the US export regulations. This
limited warranty covers only repair, replacement, refund or
credit for materially defective products that are manufactured
by Emerge, as provided above. Emerge is not liable for, and
does not cover under warranty, any loss of data or any costs
associated with determining the source of system problems
or removing, servicing or installing Emerge products. This
warranty excludes third party software, connected equipment
or stored data. In the event of a claim, Emerge’s sole obligation
shall be replacement of the hardware; under no circumstances
will Emerge be liable in any way for damages, including any
lost prots, lost savings or other incidental or consequential
damages arising out of the use of, or inability to use, such
product.
Duration of Warranty:
Limited 1 Year Warranty.
Product Repair or Replacement:
If your product meets the criteria for warranty replacement,
please contact Emerge Technologies at:
877-499-6072
[email protected]
955 Freeport Pkwy, Suite 100, Coppell, Texas 75019
(Please be prepared to provide proof of purchase.)
This limited warranty applies only to the original end user
customer of the product for so long as the original end
user customer owns the product. This limited warranty is
nontransferable.
THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHERS
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE AND EXCLUDES
ALL INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY OR
SPECIAL DAMAGES.
Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damages, so these limitations may not apply to
you. This warranty gives you specic legal rights that may vary
from state to state.
Bluetooth® and ® is a trademark or registered trademark of
Bluetooth SIG. This product is not designed, manufactured or
distributed by Bluetooth SIG.
COMFORT SLEEP MASK
WITH BUILT-IN BLUETOOTH® SPEAKERS RETRACTABLE
MICRO USB
CHARGING CABLE
User Guide for Bluetooth Sleep Mask
Model: VS001

Warning Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution: Any changes or modifications to this device not
explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.