Mogics TOFU MARU Traveller Bundle User manual
Instruction
User
Manual
Specs
Attention
Feature
Strip
Storage
Circular
design
Replaceable
adapter
Universal
socket
Dual USB-A
socket
Dual TYPE-C
socket
Auto Reset
Fuse
7A No Fuse Breaker
The maximum surge absorption:
Voltage 775V/ Current 1200A
Weight: 210g
Diameter: 82mm / Thickness: 28mm
Length: 85cm
Input/Output:
110V(770w)~220V(1540w)
7A Auto Reset Fuse
Input/Output:15W(Shared)
(1A/0.5A)
LAPTOP output:45W
(20V*2.2A / 15V*3A / 9V*5A )
MOBILE output:18W
(9V*2A / 5V*3A)
MARU
Extension
Strip
LED Light
Module
USB-A
TYPE-C
AC
Traveller
(universal socket)
Size: 30*38*58mm
Weight: 62g
Battery: 60mA
Light off
How to pull out the extension strip
Remove the magnetic plug
at 45 degree
Extend the strip
1
1
2
2
A
B
C
3
UK
EU
EU
AU
US
3-5minutes
1
2
How to coil up the extension strip
Wind the strip
against the
strip core
Before fully withdrawn,
slightly pull to tighten coil
Place the magnetic plug
back at 45 degree
How to use the LED module
Push the light
to switch on/off
Plug in power into the LED light:
LED module can be attracted
to magnetic objects
Refrain from
plugging appliances
over 7A in MARU
Wait 3-5 mins for
cool down when
fuse is tripped
About USB socket
fully charged
chargingOrange light
4. Please read the instruction before using this product.
1. Keep your hand dry when using MARU.
Avoid water or moisture.
15. MARU is not voltage transformer. Plug in after confirming
the device is applicable or connected to voltage transformer.
2. Keep away from kid.
9. Do not disassemble.
13. Avoid use of high powered electric conductive
objects devices such as hair dryer and kettle.
8. Refrain from placing MARU on uneven surface
to avoid drops and damage.
5. MARU is non-grounding device. Refrain from using appliance
that require grounding.
10. Do not over extend or fold the extension strip.
12. Do not insert sharp objects or into the socket.
3. Stop using when the plug or strip is damaged.
11. To maintain battery life, please charge
LED module at least once every 3 months.
7. Do not cover MARU so as to allow heat-dissipation.
14. Please use MARU within the
temperature range from 0℃to 40℃
6. For indoors use only.
FAQ
About USB socket About adapter
About TYPE-C socket
About the grounding wire
A
B
Please charge the laptop
at “LAPTOP” port.
1
2
UKUS AU EU
Plug in the device into
corresponding socket
Plug in the device into
corresponding socket
Recommended to use non-grounding devices.
Otherwise please ensure that your device can be used safely without grounding.
Pull out the extension strip Plug the grounding-pin into the MARU groove
Attach the desired
adapter head into MARU
International adaptor usage
◆MARU heats up or stops working when charging
It is common that MARU heats up when functioning.
Please refer to Instruction "About Auto Reset Fuse".
Before reusing, please check if there is overloadeding
of devices plugged in.
◆ MARU makes noise when device is plugged in
This is a normal situation. The noise comes from the subtle
electric current in the MARU.
◆ Socket outlet sparks when plugged
It is normal for a spark to occur when the plug is in
contact with the socket. Please reduce the time of
intermittent contact to reduce sparks.
Does AC socket support different voltages?
MARU does not transform AC voltage. Devices should
only be used when it supports local voltage.
DC allows voltage from 100 to 240V, which can be
used globally.
Q: Can we use hair dryer with MARU?
A: It depends on if the appliance supports
local voltage.
◆ Why is charing speed slow in TYPE-C socket?
1. It may be that your device or cable doesn't support PD
charging. Please confirm if the device or cable support fast
charging or use OEM cable.
2. Make sure to use the correct port.
LAPTOP port: laptop/higher power 18~45W
MOBILE port: mobile/less power less than 18W
3. If TYPE-C requires higher watts, it is suggested to use
the original transformer to plug in the MARU AC socket.
Power is not stable when charging.
AC: It may be due to overloading, which leads to fuse
disconnect continually. Please remove overload
device, or cut down loading. Try again after 3 mins.
DC: It may be due to poor connection or incompatibility.
Please replug or clean the plug head. If still not
working, please contact us.
