PIVOT POWER GENIUS User manual

PIVOTPOWER®GENIUS|USERMANUAL|V-O2 | PAGE 1
PIVOTPOWER®GENIUS
control power to anything from anywhere
OVERVIEW
Part of the Quirky + GE collection of smart products,
Pivot Power Genius is a flexible, app-enabled power strip.
Smart outlets allow you to turn anything that’s plugged
in on or off from anywhere using your mobile device.

PIVOTPOWER®GENIUS|USERMANUAL|V-O2 | PAGE 2
WHAT’SINCLUDED(in the box)
1 Pivot Power Genius
2 Quick Start Card
REQUIREDFORUSE(not included in box)
1 Wi-Fi®
2 Mobile device with
internet access
3 Wink app
FEATURES
1 Four adjustable AC outlets
2 Independently control two smart outlets
from your mobile device
3 Program and schedule when you want
the two smart outlets to turn on and off
4 Instantly connects to your mobile device
over your Wi-Fi® network
5 Transient Voltage Surge Protection
2 SMART OUTLETS
4 ADJUSTABLE AC OUTLETS
PROGRAM & SCHEDULE
SMART OUTLETS
CONNECTS
OVER YOUR
WI-FI NETWORK

PIVOTPOWER®GENIUS|USERMANUAL|V-O2 | PAGE 3
TROUBLESHOOTING
If the Wi-Fi® connection has been lost,
any scheduled timers may not execute
depending on the outage time. Re-connect
the Wi-Fi® network.
If the Wink app has lost control of the
smart outlets, it may be that Pivot Power
Genius has lost its connection to the Wi-Fi®
network. Try turning the power strip OFF
then ON again to restore its connection.
If you experience a power outage, power
will cease to ALL outlets and the Wink
app connection will be lost. When power
is restored, check the main power button
to ensure the power strip is ON to regain
connection.
If you can’t control the smart outlets from
a different mobile device, ensure you are
using the same account information within
the app.
QUESTIONS?
For service and support or tutorials, visit
http://www.quirky.com/wink/pivotpowergenius/faq,
email us at questions@quirky.com or
call QUIRKY.
GETTINGSTARTED
1 Download and install the Wink app on your
mobile device as outlined in the Quick
Start Card. The app will enable a Wi-Fi®
connection between your mobile device
and Pivot Power Genius.
2 Plug Pivot Power Genius into a grounded
wall outlet and press the power button to
turn it ON. When the power strip is ON,
the main power indicator light will glow.
DO NOT plug devices into any of the
outlets at this time.
When the power strip is turned ON, the
two regular outlets are always ON. The
two smart outlets are defaulted to OFF.
3 Open the Wink app. Follow the app’s
instructions to connect to your Pivot
Power Genius.
Your mobile device connects by sending
light pulses into a sensor on your Pivot
Power Genius. It is best to do this in a
dimly lit environment.
4 Once you’ve connected, you can plug
devices into Pivot Power Genius
Note: DO NOT OVERLOAD the power strip.
ONLY connect the device to a grounded outlet.
DO NOT connect to an ungrounded outlet.
DO NOT extend or daisy chain with other
power strips or adapters.
USINGPIVOTPOWERGENIUS
You can use Pivot Power Genius to:
1 Adjust and rotate each outlet to fit
designated areas and/or large plugs
and power adapters.
2 Turn ALL outlets ON or OFF using the
main power button.
3 Control both smart outlets:
By manually turning each outlet’s switch
ON/OFF from your Wink App or using
the buttons on the side of the power strip.
By scheduling each smart outlet to turn
ON/OFF via the Wink app. Use it to set
notifications for Wi-Fi® or power status.
Note: LEDs next to each smart outlet indicate
whether that outlet is ON or OFF.
ON/OFF button for each smart outlet
located on the side of the power strip.

PIVOTPOWER®GENIUS|USERMANUAL|V-O2 | PAGE 4
IMPORTANTSAFETY
INSTRUCTIONS/WARNINGS
CAUTION
To reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable
parts inside. Refer servicing to qualified
service personnel.
WARNING
To reduce the risk of fire or electric shock,
do not expose this appliance to rain or moisture.
WARNING
Timer could turn-on unexpectedly without the
user being present. To Reduce the Hazardous
Condition – unplug the appliance that is plugged
into the receptacle(s) controlled by the timer
before servicing.
CAUTION
This unit must be connected to an outlet with
a protective grounded connection.
CAUTION
To completely disconnect this product from
power, disconnect the plug from the wall outlet.
The plug is used to completely disconnect the
power supply to the unit and must be within easy
access to the user.
CAUTION
To reduce the risk of electric shock, do not
perform any servicing other than that contained
in the operating instructions unless you are
qualified to do so.
CAUTION
Wink devices connect by receiving flashing
light patterns that come from your phone’s
screen. Please note that a very small percentage
of individuals may experience epileptic seizures
when exposed to such light patterns or flashing
lights. If you have an epileptic condition,
consult your physician prior to using this app
to connect a device.
IMPORTANTSAFETYINSTRUCTIONS
1 Read Instructions—All safety and operating
instructions should be read before operating
the device.
2 Heed Warnings—All warnings on the device and
in the operating instructions should be adhered to.
3 Follow Instructions—All operating and safety
instructions should be followed.
4 Water & Moisture—The device should never be
used in, on or near water for risk of electric shock.
5 Ventilation—The device should always be located
in such a way that it maintains proper ventilation.
6 Heat—Never locate the device near heat sources
such as radiators, floor registers, stoves or other
heat-generating devices.
7 Grounding—DESIGNEDFORINDOORUSEONLY!
The device should ONLY beconnected to a
grounded outlet. DONOT connect product to an
ungrounded outlet.
8 CAUTION: Risk of Electric Shock. Do not plug
into other Relocatable Power Taps.
9 Power Cord Protection—Power cables should
be routed so they are not likely to be stepped
on or crushed by items placed on them or against
them. Special attention should be paid to areas
where the plug enters a socket and where the
cord exits the device.
10 Cleaning—Clean product with a damp so cloth.
DONOT submerge Pivot Power Genius in water.
*Always unplug device from power before cleaning
11 Periods Of Non-Use—Make sure to unplug Pivot
Power Genius when it is not expected to be used
for several months.
12 Dangerous Entry—Care should be taken that no
foreign objects or liquids fall or are spilled on or
inside the device.
13 Damage Requiring Service—The device should
be serviced by licensed technicians when:
• The internal electronic components
have been damaged.
• Objects have fallen or liquid spilled inside
of the device.
• The device has been exposed to moisture.
• The device does not appear to be operating
properly or exhibits a marked change in
performance.
• The device has been dropped or becomes
damaged.
14 Service—The device should always be serviced
by licensed technicians. Only replacement parts
specified by the manufacturer should be used.
The use of unauthorized substitutions may result
in fire, shock, or other hazards.
15 When servicing: Unplug any appliance that is
plugged into the power strip before servicing.
16 Caution–Do not install this device if there is
not at least meters ( feet) or more of wire
between the electrical outlet and the electrical
service panel.
17 Pivot Power Genius features an internal
protection that will disconnect the surge protective
component but will maintain power to the load –
now unprotected. If this situation is undesirable
for the application, follow the manufacturer’s
instructions for replacing this device.

PIVOTPOWER®GENIUS|USERMANUAL|V-O2 | PAGE 5
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
This Class (*) digital apparatus complies with
Canadian ICES-
FCCCOMPLIANCE
This device complies with Part of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved
by Quirky could void the user’s authority to
operate the equipment. NOTEThis equipment
has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part
of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
RFEXPOSURESTATEMENT
To maintain compliance with FCC’s RF Exposure
guidelines, this equipment should be installed
and operated with minimum 20cm distance
between the product and your body. Use only
the supplied antenna.
QUIRKYORIGINALPURCHASE
PRODUCTWARRANTY
Quirky, Inc. (“Quirky”) warrants to the original
purchaser (“Purchaser”) of this Quirky product,
for the period of one (1) year following the date
on which Purchaser purchases the product, that
the product shall be free of defects in design,
assembly, material, or workmanship.
Quirky will repair or replace, at its option, any
defective product free of charge.
In order to qualify for this warranty, the
Purchaser must provide the defective product
and a copy of the original receipt of purchase,
to Quirky for inspection.
The receipt of purchase must indicate the
product purchased, price paid, date of
purchase, and name of merchant.
Alternatively, at the Purchaser’s election, but
subject to Quirky’s approval, the Purchaser
may obtain replacement parts from Quirky,
free of charge. To obtain replacements parts,
the Purchaser must provide the product serial
number to Quirky in connection with any request
for replacement parts.
To request service under this warranty, contact
Quirky at QUIRKY or questions@quirky.
18 Wi-Fi® controlled receptacles are not to be used
with devices that could pose a safety concern if
the receptacle inadvertently turns ON or OFF,
including but not limited to heater type devices
(irons, space heaters, coffee makers, etc.) and
medical equipment.
19 High power devices such as air conditioners,
refrigerators and power tools should not be
plugged into a surge protected power strip
like Pivot Power Genius. Such devices can
cause surges when they are turned on and
off. Exposing the surge protector to additional
surge events will accelerate wear and tear on
the surge protection feature and degrade it’s
performance.
ANOTEABOUTRECYCLING
This product and its packaging materials are
recyclable. Please dispose of any materials in
accordance with the local recycling regulations.
When discarding the unit, comply with local
rules or regulations. This product and the
supplied accessories constitute the applicable
product according to the WEEE directive.
MODIFICATIONSDISCLAIMER
WARNING!!!
Changes or modifications not expressly
approved by the manufacturer could void the
user’s authority to operate the equipment.
Note: The manufacturer is not responsible
for any Radio or TV interference caused by
unauthorized modifications to this equipment.
Such modifications could void the user’s
authority to operate the equipment.
ICWARNING
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this

PIVOTPOWER®GENIUS|USERMANUAL|V-O2 | PAGE 6
HOWTOOBTAINSERVICE
Needhelp?Weareavailable
WeekdaysAMPMEST
WeekendsPMPMEST
Emailquestionsquirkycom
CallQUIRKY
com, and a Quirky representative will provide
instruction on how to proceed.
This warranty shall be null and void if Quirky
determines that the product has been improperly
installed, altered or tampered with any way.
This warranty does not protect against normal-
use wear and tear or damage due to abuse.
THISWARRANTYCONTAINSTHESOLEWARRANTY
OFQUIRKYTHEREARENOOTHERWARRANTIES
EXPRESSEDORIMPLIEDINCLUDINGTHE
IMPLIEDWARRANTYORCONDITIONOF
QUALITYMERCHANTABILITYORFITNESSFOR
APARTICULARPURPOSEANDSUCHIMPLIED
WARRANTIESIFANYARELIMITEDINDURATION
TOTHETERMOFTHISWARRANTYINNOEVENT
SHALLQUIRKYBELIABLEFORINCIDENTAL
SPECIALDIRECTINDIRECTORCONSEQUENTIAL
DAMAGESSUCHASBUTNOTLIMITEDTOLOST
BUSINESSORPROFITSARISINGOUTOFTHE
SALEORUSEOFANYQUIRKYPRODUCTEVENIF
ADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGES
Some jurisdictions do not allow exclusions or
limitations on implied warranties or incidental,
consequential or other damages, so the above
exclusions and limitations may not apply to you.
COPYRIGHTNOTICE
Copyright Quirky Incorporated
No part of this manual may be reproduced or
modified without written consent from
Quirky Incorporated.
Quirky Incorporated is not liable or
responsible for any operational, or technical
errors or omissions made in this manual.
Quirky and Pivot Power are registered
trademarks of Quirky Incorporated.
Wi-Fi® is a registered trademark of the
Wi-Fi Alliance.

PIVOTPOWER®GENIUS|MANUELD’UTILISATION|V-O2 | PAGE 1
PIVOTPOWER®GENIUS
allumez vos appareils depuis n’importe où
PRÉSENTATION
Faisant partie de la gamme de produits intelligents
Quirky + GE, Pivot Power Genius est une multi-prises
articulée connectée.
Les prises intelligentes vous permettent d’activer
n’importe quel appareil à l’aide de votre téléphone mobile.

PIVOTPOWER®GENIUS|MANUELD’UTILISATION|V-O2 | PAGE 2
CARACTÉRISTIQUES
1 Quatre prises réglables
2 Commandez indépendamment deux prises
intelligentes à l’aide de votre téléphone mobile
3 Programmez et planifiez l’activation des deux
prises intelligentes
4 Se connecte instantanément à votre appareil
mobile via votre réseau Wi-Fi®
5 Protection Contre les Surtensions Transitoires
PRISES
INTELLIGENTES
QUATREPRISESRÉGLABLES
PROGRAMMEZETPLANIFIEZ
L’ACTIVATIONDESPRISES
INTELLIGENTES
CONNEXION
PARRÉSEAU
WIFI
MATERIELREQUIS(non fourni)
1 Wi-Fi®
2 Appareil mobile avec
accès à Internet
3 Wink app
INCLUS(dans la boîte)
1 Pivot Power Genius
2 Carte de démarrage rapide

PIVOTPOWER®GENIUS|MANUELD’UTILISATION|V-O2 | PAGE 3
DÉPANNAGE
En cas de perte de liaison Wi-Fi®,
les programmateurs pourraient ne pas
fonctionner (en fonction de l’heure de
la panne). Réactivez le réseau Wi-Fi®.
Si l’appli Wink a perdu le contrôle des prises
intelligentes, c’est peut-être parce que Pivot
Power Genius n’est plus connecté au réseau
Wi-Fi®. Essayez de désactiver et réactiver la
multi-prises pour rétablir la connexion.
En cas de panne de courant, toutes les prises
seront coupées et la connexion à l’appli Wink
sera perdue. Lorsque le courant est rétabli,
vérifiez le bouton d’alimentation principal
pour faire en sorte que la multi-prises soit
active avant de rétablir la connexion.
Si vous ne pouvez pas contrôler les prises
intelligentes à partir d’un appareil mobile
différent, vérifiez si vous utilisez le même
compte dans l’appli.
QUESTIONS?
Pourobtenirdel’aideetaccéderauxtutorielsconsultez
http://www.quirky.com/wink/pivotpowergenius/faq
ouenvoyezunemailàquestionsfrancequirkycom
VouspouvezaussiappelerleQUIRKYEtatsUnis
DÉMARRAGE
1 Téléchargez et installez l’appli Wink sur
votre appareil mobile selon les indications
de la carte de démarrage rapide. L’appli
permettra la liaison Wi-Fi® entre votre
appareil mobile et Pivot Power Genius.
2 Branchez Pivot Power Genius dans une
prise murale reliée au sol et appuyez sur
le bouton d’alimentation pour la mettre
sous tension. Lorsque la multi-prises est
allumée, le témoin lumineux s’allume. Ne
branchez rien dans les prises à ce stade.
Lorsque la multi-prises est sous tension,
les deux prises standard sont toujours
actives. Les deux prises intelligentes sont
coupées par défaut.
3 Lancez l’appli Wink. Suivez les consignes
del’appli pour vous connecter à Pivot
Power Genius.
Votre appareil mobile se connecte en
envoyant des impulsions lumineuses au
capteur de votre Pivot Power Genius.
Il est préférable de procéder dans un
espace peu éclairé.
4 Une fois l’appareil connecté, branchez
les appareils dans Pivot Power Genius.
Remarque
NESURCHARGEZPASlamultiprises
NEBRANCHEZPASl’appareilsuruneprise
nonreliéeausolEvitezlesautresrallonges
multiprisesouadaptateurs
Le bouton ON/OFF pour
chaque prise intelligente
se trouve sur le côté de la
multi-prises.
UTILISATIONDEPIVOTPOWERGENIUS
Vous pouvez utiliser Pivot Power Genius pour :
1 Régler et pivoter chaque prise selon
l’espace disponible et pour installer les
prises et adaptateurs volumineux.
2 Activer ou désactiver TOUTES les prises à
l’aide du bouton d’alimentation principal.
3 Contrôler les deux prises intelligentes
4 Activer ou désactiver manuellement les
prises à partir de votre appli Wink ou à l’aide
des boutons latéraux de la multi-prises
5 Programmer l’activation ou la désactivation
des prises intelligentes à l’aide de l’appli
Wink. Utilisez l’appli pour définir les
notifications d’état du réseau Wi-Fi® ou de
l’alimentation.
Remarquelestémoinsàcôtédechaqueprise
indiquentsilapriseestactivéeounon

PIVOTPOWER®GENIUS|MANUELD’UTILISATION|V-O2 | PAGE 4
CONSIGNESDESÉCURITÉ
IMPORTANTES/AVERTISSEMENTS
ATTENTION
Nepasdémonterpourévitertoutrisque
d’électrocutionRetirerseulementlecompartiment
pouraccéderauxpilesLespiècesinternesne
peuventpasêtreremplacéesparl’utilisateur
Confiezl’entretienàuntechnicienqualifié
ATTENTION
Pourlimiterlesrisquesd’incendieet
d’électrocutionn’exposezpaslematériel
àlapluieouàl’humidité
ATTENTION
Leprogrammateurpeutêtreinopinément
activélorsquel’utilisateurestabsentPour
limiterlesrisquesdébranchezl’appareil
branchéàlaprisecommandéeparle
programmateuravanttouteintervention
ATTENTION
L’appareildoitêtrebranchéàuneprise
reliéeausol
ATTENTION
Pourdébranchercomplètementl’appareil
enlevezlafichedelaprisemuraleetenlevez
lespilesLafichepermetdedébrancher
complètementl’appareilElledoitdoncêtre
accessibleàl’utilisateur
ATTENTION
Pourréduirelerisqued’électrocutionn’effectuez
aucuneopérationd’entretienhormiscelles
figurantdanslemanuelàmoinsdedisposerdes
compétencesnécessaires
ATTENTION
LesappareilsWinkseconnectentàl’aidedes
signauxlumineuxtransmisparl’écrandevotre
téléphoneDerarespersonnespeuventfaire
l’objetdecrisesd’épilepsieencasd’exposition
àcessignauxouclignotementslumineuxSivous
êtesépileptiqueconsultezvotremédecinavant
d’utiliserl’applicationpourétablirlaconnexion
CONSIGNESDESÉCURITÉ
IMPORTANTES
1 Lisez les consignes – Toutes les consignes de
sécurité et d’utilisation doivent être lues avant
d’utiliser l’appareil.
2 Respectez les avertissements – Tous les
avertissements affichés sur l’appareil et dans
lemanuel doivent être pris en compte.
3 Respectez les consignes – Toutes les consignes
de sécurité et d’utilisation doivent être respectées.
4 Eau et humidité – L’appareil ne doit jamais être
utilisé dans l’eau, sur l’eau ou à proximité afin
d’éviter les électrocutions.
5 Ventilation – L’appareil doit toujours se trouver
dans un endroit bien ventilé.
6 Chaleur – Ne placez jamais l’appareil à proximité
de sources de chaleur, tels les radiateurs, les
grilles de soufflage, les poêles et autres systèmes
de chauffage.
7 Mise au sol – UTILISATION A L’INTERIEUR
UNIQUEMENT ! L’appareil ne doit être branché
qu’à une prise reliée au sol. Ne branchez pas
l’appareil sur une prise non mise au sol.
8 Attention : Risque d’électrocution.
Ne pas brancher dans d’autres multi-prises.
9 Protection du câble d’alimentation – Les câbles
d’alimentation doivent être placés de telle sorte
à éviter tout piétinement ou écrasement par
des objets. Gardez à l’oeil les zones où la fiche
est insérée dans une prise ou une allonge, et la
jonction de l’appareil et du câble.
10 Nettoyage – Nettoyer le produit avec
un chiffon doux humide. Ne pas immerger
Pivot Power Genius dans l’eau.
* Toujours débrancher l’appareil avant
le nettoyage
11 Périodes de non-utilisation – Débranchez Pivot
Power Genius si vous ne comptez pas l’utiliser
pendant plusieurs mois.
12 Accès dangereux – Veillez à éviter tout accès
decorps étrangers ou liquides à l’intérieur ou
surl’appareil.
13 Dégâts nécessitant une réparation – L’appareil
doit être réparé par des techniciens qualifiés
uniquement lorsque :
• Les composants électroniques internes ont
étéendommagés.
• Le matériel est tombé ou du liquide est rentré
dans l’appareil.
• L’appareil a été exposé à l’humidité.
• L’appareil semble ne pas fonctionner
correctement ou si vous constatez une baisse
des performances.
• L’appareil est tombé ou a été endommagé.
14 Entretien – L’appareil doit toujours être réparé
par des techniciens qualifiés. Seules les pièces de
rechange stipulées par le fabricant doivent être
utilisées. L’utilisation d’autres pièces peut entraîner
des incendies, électrocutions ou autres risques.
15 Lors de l’entretien : débranchez tous les
appareils de la multi-prises avant tout entretien.

PIVOTPOWER®GENIUS|MANUELD’UTILISATION|V-O2 | PAGE 5
CLAUSEDENONRESPONSABILITÉ
ENCASDEMODIFICATION
ATTENTION!!!
Leschangementsoumodificationsquin’ontpas
étéexpressémentapprouvésparlefabricant
risquentd’annulerlacapacitédel’utilisateurà
exploiterl’appareil
RemarqueLefabricantdéclinetouteresponsabilité
encasd’interférenceradioouTVprovoquéepar
unemodificationnonautoriséedumatérielDe
tellesmodificationspourraientannulerlacapacité
del’utilisateuràexploiterl’appareil
DÉCLARATIONDECONFORMITÉUE
QuirkyIncdéclarequeceproduitdecommunication
radioestconformeauxnormesenvigueuret
autresclausesapplicablesenvertudelaDirective
//EC
GARANTIESURPRODUIT
D’ORIGINEQUIRKY
QuirkyIncQuirkyoffreàl’acheteuroriginel
AcheteurdeceproduitQuirkypendantune
périodedeanàcompterdeladated’achatdu
produitparl’Acheteurunegarantiesurleproduit
contretoutdéfautdeconceptionassemblage
matérieloudefabrication
Quirkyassureralaréparationouleremplacement
duproduitàsaseulediscrétion
Pourprofiterdecettegarantiel’Acheteurdevra
remettreleproduitdéfectueuxetunecopiedu
ticketdecaisseàQuirkypourinspectionLereçu
doitindiquerleproduitachetéleprixpayéla
dated’achatetlenomducommerçant
Sil’Acheteurlesouhaiteetsousréservede
l’accorddeQuirkyl’Acheteurpourraobtenirdes
piècesderechangeauprèsdeQuirkysansfrais
Pourobtenirlespiècesderechangel’Acheteur
devrafournirlenumérodesérieduproduità
Quirkylorsdel’introductiondetoutedemande
depièces
Pouruneréparationdanslecadredecette
garantiecontactezQuirkyauQUIRKY
ouquestionsquirkycomUnreprésentantde
Quirkyvousexpliqueracommentprocéder
CettegarantieseranulleetnonavenuesiQuirky
établitqueleproduitaétémalinstallémodifié
oumanipulédequelquemanièrequecesoitLa
garantien’offreaucuneprotectioncontrel’usure
normaleduproduitoulesdégâtsrésultantd’une
utilisationabusive
CETTEGARANTIEREPRÉSENTELASEULE
FOURNIEPARQUIRKYILN’EXISTEAUCUNE
AUTREGARANTIEEXPLICITEOUIMPLICITEDONT
LAGARANTIEOULACONDITIONIMPLICITEDE
QUALITÉVALEURMARCHANDEOUADÉQUATION
ÀUNUSAGEPARTICULIERCESGARANTIES
IMPLICITESLECASÉCHÉANTONTUNEDURÉE
LIMITÉEÀL’INSTARDELAPRÉSENTEGARANTIE
QUIRKYDÉCLINETOUTERESPONSABILITÉENCAS
DEDOMMAGESACCIDENTELSSPÉCIAUXDIRECTS
INDIRECTSOUCONSÉCUTIFSTELSQUESANS
TOUTEFOISQUECETTELISTESOITEXHAUSTIVE
LAPERTED’ACTIVITÉOUDEPROFITSDUSÀLA
VENTEOUÀL’UTILISATIONDEN’IMPORTEQUEL
PRODUITQUIRKYETCEMÊMESIL’ÉVENTUALITÉ
DETELSDÉGÂTSAVAITÉTÉSIGNALÉE
Certainspaysn’autorisentpasl’exclusionoula
limitationdesgarantiesimplicitesnisurlesdégâts
accidentelsconsécutifsouautresLesrestrictions
ciavantpourraientnepasvousconcerner
16 Attention : Ne pas installer l’appareil s’il y a plus
de 10 m de câble entre la prise électrique et le
tableau d’alimentation.
17 Pivot Power Genius est doté d’une sécurité qui
débranchera le système de protection contre les
surtensions, mais préservera l’alimentation (qui
ne sera dès lors plus protégée). Si cela n’est pas
conseillé, suivez les consignes du fabricant pour
remplacer le fusible.
18 Les systèmes Wi-Fi® ne pourront pas être
utilisés avec les appareils qui pourraient
provoquer des risques pour la sécurité si
l’appareil en question est activé/désactivé
inopinément, incluant les appareils dotés d’un
système de chauffage (fers à repasser, radiateurs,
machines à café, etc.) et de matériel médical.
19 Les appareils consommant beaucoup
d’électricité, tels que les climatiseurs, les
réfrigérateurs et les outils électriques, ne
devraient pas être insérés dans une multi-prises
protégée contre les surtensions telles que
Pivot Power Genius. Ces appareils peuvent
provoquer des surtensions lorsqu’ils sont activés
et désactivés. L’exposition du fusible à des
surtensions accélère l’usure du système et limite
ses performances.
REMARQUESURLERECYCLAGE
Leproduitetsonemballagesontrecyclables
Veillezàleséliminerconformémentaux
règlementsenvigueurenmatièrederecyclage
Lorsdelamiseaurebutrespectezlalégislation
oulesrèglementslocauxCeproduitet
lesaccessoiresfournissontcouvertsparla
directiveWEEE

PIVOTPOWER®GENIUS|MANUELD’UTILISATION|V-O2 | PAGE 6
COMMENTOBTENIRUNEREPARATION
Besoind’aide?Noussommesdisponibles
Dulundiauvendredidehàh
Leweekenddehàh
Emailquestionsfrancequirkycom
TéléphoneQUIRKY
COPYRIGHT
CopyrightQuirkyIncorporated
Aucunepartiedecemanuelnepeutêtre
reproduiteoumodifiéesansl’accordécrit
préalabledeQuirkyIncorporated
QuirkyIncorporateddéclinetouteresponsabilité
encasd’erreursopérationnellesoutechniques
voired’omissionsdanscemanuel
QuirkyetPivotPowersontdesmarques
commercialesdeQuirkyIncorporated
WiFi®estunemarquedéposéedeWiFiAlliance
Table of contents
Languages: