mogogo S-ASV-PR-75-01 User manual

HIGH PROFILE ACRYLIC SNEEZE GUARD
ASSEMBLY INSTRUCTIONS
×2

PARTS
ASSEMBLY
1Use round cap M6 Allen screws.
Do not over tighten the screws.
X2
X1
X1
X1
HIGH PROFILE FULL ACRYLIC SNEEZE GUARD
HIGH PROFILE ACRYLIC SNEEZE GUARD WITH OPENING
ROUND CAP M16
ALLEN SCREWS
FLAT CAP M6
ALLEN SCREWS
ALLEN KEY FOR M16
OR
X4
X4
X2
12" | 30cm SEGMENTS
CONNECTORS
SPACERS
X2
ALLEN KEY FOR M6

3
2 Unscrew flat head screws and replace with the segment
repeat step 2 for other side

CATALOG# S-ASV-PR-75-01
www.mogogo-buffet.com
3
4
5Use the round cap M16 Allen
screws supplied, to attach the
connectors to the segments.
Place the sneeze guard on top
of the segment.
Clean breath guards with warm water and mild soap and rinse thoroughly with water. Dry with soft cloth to prevent
water spots. You can also clean and polish with cleaners made specifically for acrylic, like Novus #1 or Brillianize.
Dry with a soft sponge to prevent water spots.
ATTENTION!
×
×
×
×
Never use abrasive or highly alkaline cleansers.
Never scrape with razor blades or other sharp instruments.
Never use benzene, acetone, or carbon tetrachloride.
Never use cleaners such as Windex or 409.
GREAT JOB, YOUR GOOD TO GO!