mogogo V-Shield WIDE User manual

Unscrew the upper screws using a flat head screwdriver
in both legs as shown.
Screw one guide pin into one of the units and assemble them together.
WIDE NARROW SHILED
ASSEMBLY INSTRUCTIONS
Patent pending

ASSEMBLY
PARTS
X1
X4
X1
X4
X1
SET OF 2 LEGS
BA
OR
SPACERS
Place both legs with magnetic elements facing outwards as shown.
OR OR
OR
SCREWS
X1
1
ALLEN KEY FOR M6 GUIDING PINS
WIDE PANEL WITH OPENING
L29.5″ W35″ | L75cm W89cm
NARROW PANEL WITH OPENING
L29.5″ W20″ | L75cm W50cm
WIDE PANEL L36″ W35″ | L91cm W89cm
NARROW PANEL
L36″ W20″ | L91cm W50cm
B
A

Place both legs with magnetic elements facing outwards as shown.
Tighten gently all 4 screws.
Place gently.
Notice the logo should be on your left.
2
3
GREAT JOB, YOUR GOOD TO GO!
B
A
B
A
Clean acrylic panels with warm water and mild soap and rinse thoroughly with water. Dry with soft cloth to prevent
water spots. You can also clean and polish with cleaners made specifically for acrylic, like Novus #1 or Brillianize.
Dry with a soft sponge to prevent water spots.
ATTENTION!
×
×
×
×
Never use abrasive or highly alkaline cleansers.
Never scrape with razor blades or other sharp instruments.
Never use benzene, acetone, or carbon tetrachloride.
Never use cleaners such as Windex or 409.
CATALOG# S-ASV-PR-72-01
www.mogogo-buffet.com

ASSEMBLE 2 SHIELDS AND MORE
Unscrew the upper screws using a flat head screwdriver
in both legs as shown.
1
Screw one guide pin into one of the units and assemble them together.
2