mogogo Utility Raymond Products Pro Cart Large User manual

RAYMOND PRODUCTS PRO CART LARGE
ASSEMBLY INSTRUCTIONS
PAY ATTENTION!
CREATIVE ROUND TOPS SHOULD BE LOADED WITH THEIR ROUND SIDE FACING DOWN (AS SHOWN HERE).
THE CART CAN HOLD UP TO 12XLR001 (LARGE ROUND TOP) OR UP TO 15XLP001 (LARGE 6’ TOP)
OVERLOADING THE CARTS MAY CAUSE FAILURE OF THE CART!

PARTS
ASSEMBLY
1
Insert caps into the vertical frame ends.
X2
X4
LARGE CAPS
SMALL CAPS
SCREW NUTS
X12
X12
ROUND CAP SCREWS
BOTTOM RACK
BOTTOM HORIZONTAL FRAME
TOP HORIZONTAL FRAME
VERTICAL FRAME
VERTICAL FRAME WITH HANDLE
X1
X1
X1
X2X2
CASTERS CASTERS WITH BRAKES
X1
X1

3
2
All screws must be mounted from the inside out.
Be sure not to over tighten!
4
Attach bottom horizontal frame (without leg dividers).

CATALOG# AI021
www.mogogo-buffet.com
5
7
6
Attach top horizontal frame
with leg dividers.
Insert two casters with brakes
in the vertical frame with handle.
Insert two casters
in the remaining vertical frame.
YOUR ALL DONE, WAY TO GO!