Living Spaces 305-P241100 User manual

ITEM 305-P241100
7 DRAWER DRESSER
PARTS LIST
1Chest 1
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small hardware which may have come loose inside the carton during shipment. Identify and count all
hardware and compare with the hardware list below.
When placing furniture on non-carpeted flooring, HMI recommends the use of floor protection such
as an area rug or furniture pads. Area rugs and padding not included with purchase.
No. Description Quantity
Sketch
Page 1 of 2
Made In Malaysia Residential Use Only
Legs2 4
3Center Leg 1
HARDWARE LIST
AJCBC Bolt 8
No. Description Sketch Quantity
BSpring Washer 8
C
D
Flat Washer
Allen Key
8
1
Size
M6 x 50MM
M6
M6
M4 x 65MM
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS HEAD SCREWDRIVER
ETipping Restraint 1
-

ASSEMBLY INSTRUCTIONS
STEP 1
Assembly all leg as shown.
Page 2 of 2
Residential Use Only
STEP 2
Tipping restraint is attached to the wall.
C
A
B
D
2
1
Level Me on
Uneven Floor
3
Wall
Affix to wall
behind
Dresser
E
1
Made In Malaysia