Southern Enterprises Ryecroft CK045200TX User manual

Page | 1
PO：
CK045200TX
Ryecroft End Table Trunk
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.se
ifurniturestore
.com

Page | 2
Ryecroft End Table Trunk
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware
is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according
to the pictures. Using the incorrect hardware will cause damage.
A.
Quantity
of 1
Top Panel
B.
Quantity
of 1
Left Side Panel
C.
Quantity
of 1
Right Side Panel
D.
Quantity
of 1
Front Panel
E.
Quantity
of 1
Back Panel
F.
Quantity
of 1
Bottom Panel
G.
Quantity
of 4
Foot
H.
Quantity
of 4
Post
1
Quantity
of 1
Allen Wrench

Page | 3
2
Quantity
of 4
Bolt
∅
5/16’’X 2-3/4” L
3
Quantity
of 4
Spring Washer
4
Quantity
of 4
Flat Washer
5
Quantity
of 24
Cam Lock
6
Quantity
of 24
Cam Bolt
7
Quantity
of 24
Sticker Cover
8
Quantity
of 2
Folded Hinge
9
Quantity
of 1
Right Lid Support
10
Quantity
of 1
Left Lid Support
11
Quantity
of 20
Screw
∅
1/8”X5/8” L
12
Quantity
of 2
EVA Pad
13
Quantity
of 28
Wood Dowel
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth. Avoid rubbing
or scratching the surface with rough or abrasive
objects.
For replacement parts or questions, please call
SEI
customer service at 1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver (Not Included)

Page | 4
H
E6
13
13
E

6
13
7
Figure 1
Insert Cam Locks (5) into holes on
Back Panel (E).
Screw Cam Bolts (6) into holes on
Posts (H).
Attach Posts (H) to Back Panel (E) by
inserting Wood Dowels (13) and Cam
Bolts (6) into corresponding holes until
all panels meet.
Tighten by rotating Cam Locks (5)
clockwise with Phillips screwdriver
(not included).
Cover all Cam Lock holes with Sticker
Covers (7).
Figure 2
Insert Cam Locks (5) into holes on
Left Side Panel (B) and Right Side
Panel (C).
Screw Cam Bolts (6) into holes on
Posts (H).
Attach Left Side Panel (B) and Right
Side Panel (C) to Posts (H) by
inserting Wood Dowels (13) and Cam
Bolts (6) into corresponding holes until
all panels meet.
Tighten by rotating Cam Locks (5)
clockwise with Phillips screwdriver
(not included).
Cover all Cam Lock holes with Sticker
Covers (7)
Ryecroft End Table Trunk
Assembly Instructions

Page | 5
H
D6
13
13
6
5
7

6
57
5
5
7
H
Figure 3
Insert Cam Locks (5) into holes on
Front Panel (D).
Screw Cam Bolts (6) into holes on
Posts (H).
Attach Posts (H) to Front Panel (D)
by inserting Wood Dowels (13) and
Cam Bolts (6) into corresponding
holes until all panels meet.
Tighten by rotating Cam Locks (5)
clockwise with Phillips screwdriver
(not included).
Cover all Cam Lock holes with
Sticker Covers (7).
Figure 4
Insert Cam Locks (5) into holes on
Left Side Panel (B) and Right Side
Panel (C).
Screw Cam Bolts (6) into holes on
Posts (H) of Front Panel (D).
Attach Front Panel (D) to Left Side
Panel (B) and Right Side Panel (C)
by inserting Wood Dowels (13) and
Cam Bolts (6) into corresponding
holes until all panels meet.
Tighten by rotating Cam Locks (5)
clockwise with Phillips screwdriver
(not included).
Cover all Cam Lock holes with
Sticker Covers (7).

Page | 6
13
6
6
13
13
13 13 13
13
75
Figure 5
Screw Cam Bolts (6) into
holes on Bottom Panel (F).
Attach Bottom Panel (F) to
assembled unit from Figure 3
by inserting Wood Dowels
(13) and Cam Bolts (6) into
corresponding holes until all
panels meet.
Tighten by rotating Cam
Locks (5) clockwise with
Phillips screwdriver (not
included).
Cover all Cam Lock holes
with Sticker Covers (7).

Page | 7
8
11
11
Figure 6
Secure Feet (G) to
assembled unit from Figure 4
by inserting Wood Dowels
(13), Bolts (2),Spring
Washers (3),and Flat
Washers (4).
Tighten Bolts with Allen
Wrench (1).
Figure 7
Attach Folded Hinge (8) to
Top Panel (A) using Screws
(11).
Tighten Screws (11) with
Philips Screwdriver (not
included).

Page | 8
C
E
811
11
11
Figure 8
Attach Top Panel (A) to
assembled unit from Figure 5
at Folded Hinges (8), using
Screws (11).
Tighten Screws (11) with
Philips Screwdriver (not
included).
Put EVA Pads (12) on front
corners of the Trunk.
Figure 9
Attach Right Lid Support (9)
and Left Lid Support (10) to
Top Panel (A), Left Side
Panel (B), and Right Side
Panel (C) using Screws (11).
Tighten Screws (11) with
Philips Screwdriver (not
included).

Page | 9
Figure 10
Now your Ryecroft End T
able
Trunk is ready to use.

Page | 10
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not
responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days
of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas), Mon-Fri
9am – 4pm CST, or email us at [e-mail]. Please ask for customer service representative for issues involving
damages or replacement parts. Please ask for technical assistance representative for any issues with product and
assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service: 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form