MOKENEYE LB01Z User manual

2-in-1
20V CORDLESS LEAF BLOWER &VACUUM
Model LB01Z
Owner’s Manual
VERSION: LB01Z-EN-03
WARNING: Toreduce the risk of injury, the user must read and understand the
Owner
NOTICE: Get 1-year extended warranty by scanning the QR code to REGISTER.
's Manualbeforeusingthisproduct.Savetheseinstructionsforfuturereference.
For Customer Service
[e-mail]
www.facebook.com/MokeneyeTools

2
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
...........
2
SYMBOLS
............................................
4
GET TO KNOW YOUR LEAF BLOWER
......
5
SPECIFICATIONS
...................................
5
OPERATING INSTRUCTIONS
..................
8
MAINTENANCE
..................................
10
TROUBLE SHOOTING
..........................
11
LIMITED WARRANTY
..........................
11
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic
precauons should always be followed, including
the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS PRODUCT!
To reduce the risk of fire, electric
shock, or injury: Know your
blower. Read the instrucon manual carefully. Learn
the blower’s applicaons and limitaons, as well as
the specific potenal hazards related to this blower.
Following this rule will reduce the risk of electric
shock, fire, or serious injury.
• This blower is intended for household use only.
• Do not leave blower unaended when the
baery is inserted. Remove the baery when
the blower is not in use and before servicing.
• Do not allow the blower to be used as a toy.
Close aenon is necessary when used by or
near children.
• Use only as described in this manual. Use only
manufacturer’s recommended aachments.
• Do not handle the charger, including charger
plug, or charger terminals with wet hands.
• Do not put any object into any openings. Do not
use with any opening blocked; keep openings
free of dust, lint, hair, and anything that may
reduce air flow.
• Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
Loose clothes, jewelry, or long hair can be drawn
into air vents.
• Secure long hair above shoulder level to
prevent entanglement in moving parts.
• Use extra care when cleaning on stairs.
• If the blower is not working as it should, has
been dropped, damaged, le outdoors, or
dropped into water, return it to a service center.
• Do not operate blowers in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Blowers
create sparks which may ignite the dust or
fumes.
• Use only the charger supplied by the
manufacturer to recharge.
• Do not charge the baery pack outdoors.
• Do not charge the baery pack in rain or in wet
locaons.
• Use the baery-operated blower only with
specifically designated baery pack. Use of any
other baeries may create a risk of fire.
• When baery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connecon from one terminal
to another. Shorng the baery terminals
together may cause burns or a fire.
• Under abusive condions, liquid may be ejected
from the baery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, addionally seek medical help.
Liquid ejected from the baery may cause
irritaon or burns.
• Follow all charging instrucons and do not
charge the baery pack or appliance outside of
the temperature range specified in the
instrucons. Charging improperly or at
temperatures outside of the specified range may
damage the baery and increase the risk of fire.
• Stay alert, watch what you are doing and use
common sense when operang a power
blower. Do not use the blower while red,
upset, or under the influence of drugs, alcohol,
or medicaon. A moment of inaenon while
operang blowers may result in serious personal
injury.
• Avoid accidental starng. Be sure that the
switch is in the locked or off posion before
inserng the baery pack. Carrying blowers
with your finger on the switch or inserng the
baery pack into a blower with the switch on
invites accidents.
• Use safety equipment. Always wear eye
protecon. Dust mask, non-skid safety shoes,
hard hat, or hearing protecon must be used for
appropriate condions.
• Always wear eye protecon with side shields
marked to comply with ANSI Z87.1 along with
hearing protecon when operang this
equipment. Everyday glasses have only impact
resistant lenses. They are NOT safety glasses.
Following this rule will reduce the risk of eye
injury.
• Do not use on a ladder, rooop, tree, or other
unstable support. Stable foong on a solid
surface enables beer control of the blower in
unexpected situaons.
• Always take care of your feet, children, or pets
around you when removing the baery pack
from blower. Serious injury could result if the
baery pack falls. NEVER remove the baery
pack when in a high posion.
• Do not use the blower if switch does not turn it
on or off. A blower that cannot be controlled

3
with the switch is dangerous and must be
repaired.
• Detach the baery pack from the blower before
making any adjustments, changing accessories,
or storing the blower. Such prevenve safety
measures reduce the risk of starng the blower
accidentally.
• Turn off all controls before removing the
baery.
• DO NOT aempt to clear clogs from the unit
without first removing the baery.
• Check for misalignment or binding of moving
parts, breakage of parts, and any other
condion that may affect the blower’s
operaon. If damaged, have the blower
serviced before using. Many accidents are
caused by poorly maintained blowers.
• Keep the blower and its handle dry, clean and
free from oil and grease. Always use a clean
cloth when cleaning. Never use brake fluids,
gasoline, petroleum-based products, or any
strong solvents to clean your blower. Following
this rule will reduce the risk of loss of control and
deterioraon of the enclosure plasc.
• Protect your lungs. Wear a face or dust mask if
the operaon is dusty. Following this rule will
reduce the risk of serious personal injury.
• Protect your hearing. Wear hearing protecon
during extended periods of operaon.
Following this rule will reduce the risk of serious
personal injury.
• Wear heavy long pants, long sleeves and boots.
Avoid loose garments or jewelry that could get
caught in moving parts of the machine or its
motor.
• Do not operate the equipment while barefoot
or when wearing sandals or similar lightweight
footwear. Wear protecve footwear that will
protect your feet and improve your foong on
slippery surfaces.
• Baery powered blowers do not have to be
plugged into an electrical outlet; therefore,
they are always in operang condion. Be
aware of possible hazards when not using your
baery powered blower or when changing
accessories. Following this rule will reduce the
risk of electric shock, fire, or serious personal
injury.
• Do not incinerate the appliance even if it is
severely damaged. The baeries can explode in
a fire.
• Baeries can explode in the presence of a
source of ignion, such as a pilot light. To
reduce the risk of serious personal injury, never
use any cordless product in the presence of open
flame. An exploded baery can propel debris and
chemicals. If exposed, flush with water
immediately.
• Keep firm foong and balance. Do not
overreach. Overreaching can result in loss of
balance.
• Check the work area before each use. Remove
all objects such as rocks, broken glass, nails,
wire, or string which can be thrown by or
become entangled in the machine.
• Do not point the blower tube in the direcon of
people or pets.
• Never run the unit without the proper
equipment aached. Always ensure that the
blower tube is installed.
• When not in use, the blower should be stored
indoors in a dry, secure place out of the reach
of children.
• Keep all bystanders, children, and pets at least
50 . away.
• Never use the blower near fires or hot ashes.
Use near fires or ashes can spread
fires and result in serious injury
and/or property damage.
• Never use blower to spread chemicals,
ferlizers, or any other toxic substances.
Spreading these substances could result in
serious injury to the operator or bystanders.
Never place the blower on any surface, except a
hard, clean surface when the engine is running.
Gravel, sand, and other debris can be picked up by
the air inlet and thrown at the operator or
bystanders, causing possible serious injuries.
• To ensure safety and reliability, all repairs
should be performed by a qualified service
technician.
• Blower service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel may result in a risk of injury.
• When servicing a blower, use only idencal
replacement parts. Follow instrucons in the
Maintenance secon of this manual. Use of
unauthorized parts or failure to follow
Maintenance Instrucons may create a risk of
shock or injury.
• Do not expose a baery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 212°F (100°C) may cause
explosion.
• Save these instrucons. Refer to them
frequently and use them to instruct others who
may use this tool. If you loan this tool to
someone else, also loan these instrucons to
them to prevent misuse of the product and
possible injury.
SAVE THESE INSTRUCTIONS!

4
SYMBOLS
SAFETY SYMBOLS
The purpose of safety symbols is to aract your
aenon to possible dangers. The safety symbols
and the explanaons with them deserve your careful
aenon and understanding. The symbol warnings
do not, by themselves, eliminate any danger. The
instrucons and warnings they give are no
substutes for proper accident prevenon measures.
Be sure to read and understand all
safety instrucons in this Owner's
Manual, including all safety alert symbols such as
"DANGER," "WARNING," and "CAUTION" before
using this tool. Failure to following all instrucons
listed below may result in electric shock, fire, and/or
serious personal injury.
The
definions below describe the level of severity
for
each
signal word. Please read the manual and
pay
aenon to thesesymbols.
This is the safety alert symbol. It is used
to
alert you to potenal personal injury
hazards.
Obey all safety messages that follow
this
symbol
to avoid possible injury or death.
DANGER indicates a
hazardous
situaon which, if not avoided,
will
result in death or serious injury.
WARNING indicates a hazardous
situaon which, if not avoided,
could result in death or serious injury.
CAUTION, used with the safety
alert
symbol, indicates a
hazardous
situaon
which, if not avoided, will result in minor
or
moderate
injury.
DAMAGE PREVENTION AND
INFORMATION MESSAGES
These inform the user of important informaon
and/or instrucons that could lead to equipment or
other property damage if they are not followed. Each
message is preceded by the word "NOTICE",as in the
example below:
NOTICE:Equipment and/or property damage may
result if these instrucons are not followed.
The operaon of any power tools
can result in foreign objects being
thrown into your eyes, which can result in severe eye
damage. Before beginning power tool operaon,
always wear safety goggles or safety glasses with
side shields and a full-face shield when needed. We
recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side
shields. Always use eye protecon which is marked
to comply with ANSI Z87.1.
SYMBOLS (CONTINUED)
IMPORTANT:Some of the following symbols may be
used on your tool. Please study them and learn their
meaning. Proper interpretaon of these symbols will
allow you to operate the tool beer and more safely.
Symbol
Designation/Explanation
V
Volts
A
Amperes
Hz
Hertz
W
Wa
kg
Kilograms
min
Minutes
s
Seconds
Wh
Wa-hours
Ah
Ampere-Hours
Ø
Diameter
n0
No-load speed
n
Rated speed
…/min
Revoluons or
reciprocaons per minute
IPX4
Ingress Protecon Degree
CFM
Cubic Feet Per Minute
MPH
Mile per hour
0
Off posion
1,2,3, …
I, II, III,
Selector sengs
Infinitely variable selector with
off
Arrow
Direct current
Alternang current
Class II tool
Earthing terminal
Li-ion RBRC seal
Read manual symbol
Wear eye protecon symbol

5
GET TO KNOW YOUR LEAF BLOWER
1)
FRONT BLOWER
5) AIR INLET
2)
BLOWER HOUSING
6) EXTENSION TUBE
3)
VARIABLE-SPEED TRIGGER SWITCH
7) COLLECTION BAG
4)
3-SPEED DIAL
SPECIFICATIONS
Rated voltage 20V d.c.
Speed Max. 13000 RPM
Air Velocity Max. 150 MPH
Recommended working
temperature
14~104°F (-10~40°C)
Recommended storage
temperature
32~104°F (0~40°C)
Variable speed dial
Delivers variable speed. Adjusts and keeps the air
velocity of the blower according to your needs.
Increases the air velocity to the maximum by turning
the dial wheel to the max posion.
Extender tube
Install extension tube to change the tool from
desktop to ground sweeper.
Reusable collecon bag
The collecon bag is used to collect dust when the
vacuuming funcon is used.
DETACH
BATTERY-
RELEASE
BUTTON
ATTACH
1
2
3
4
5
6
7
1
2

6
①
②
FRONT TUBE
BLOWER
HOUSING
①
②
FRONT TUBE
EXTENSION
TUBE
③
④
FRONT TUBE
EXTENSION
TUBE
BLOWER
HOUSING
3a
3b
3c

7
③④
FRONT
TUBE
AIR
INLET
TRIGGER
SWITCH
①
②
BLOWER
HOUSING
COLLECTION
BAG
3-SPEED
DIAL
4a 4b
56
78

8
OPERATING INSTRUCTIONS
To reduce the risk of fire, personal injury, and
product damage due to a short circuit, never
immerse your tool, baery pack or charger in
fluid or allow a fluid to flow inside them.
Corrosive or conducve fluids, such as seawater,
certain industrial chemicals, and bleach or
bleach-containing products, etc.can cause a
short circuit.
If any parts are damaged or missing, do not
operate this product unl the parts are
replaced. Use of this product with damaged or
missing parts could result in serious personal
injury.
Do not aempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteraon or modificaon is
misuse and could result in a hazardous condion
leading to possibleserious injury.
Do not use any aachments or accessories not
recommended by the manufacturer of this
product. The use of aachments or accessories
not recommended can result in serious personal
injury.
Do not allow familiarity with this product to
make you careless. Remember that a careless
fracon of a second is sufficient to inflict
serious injury.
Always wear eye protecon with side shields
marked to comply with ANSI Z87.1, along with
hearing protecon. Failure to do so could result
in objects being thrown into your eyes and other
possible serious injuries.
To prevent accidental starng that could cause
serious personal injury, always remove the
baery pack from the tool when assembling
parts, making adjustments, cleaning, or when
not in use.
This blower must be used only with the baery
packs and chargers listed below:
Baery Pack Selecon:
B201505QZ(L), B202005QZ(L), B202010QZ(L),
B203005QZ(L), B204005QZ(L), B204010QZ(L).
Charger Selecon:
C05QZ1US, C10QZ1US, C20Q1US, C20QK1US.
NOTICE: Please refer to the baery and charger
manuals for detailed operang informaon.
APPLICATION
• This tool has been designed to blow wood chips
and dust off the workbench
• This tool has been designed for blowing dry
leaves and other dry garden rubbish such as
grass and twigs.
• This tool has been designed for sucking dry
debris such as wood chips and animal hair.
• This tool is intended for domesc use only and
is not designed to be used under wet condions.
• This tool is not intended for professional use.
To prevent accidental starng that
could cause serious personal
injury, always remove the baery pack from the
tool when assembling parts.
LED FUNCTIONS OF CHARGER
LED WILL BE ON TO INDICATE STATUS OF CHARGER
AND BATTERY PACK:
• LED lights up red = Fast charging mode.
• LED lights up green = Fully charged and in
maintenance charge mode.
• LED lights up green = When an under-charged
baery pack is inserted into charger, indicates hot
baery pack or that baery pack is out of normal
temperature range or deeply discharged or
defecve baery pack.
• No LED on = Defecve charger.
CHARGING THE BATTERY PACK
See Fig.2
Baery packs for this tool are shipped in a low charge
condion to prevent possible problems. Therefore,
you should charge it unl the green LED on the front
of the charger comes on.
CHARGING A COOL BATTERY PACK
If baery pack is within normal temperature range,
the red LED on charger will come on.
NOTICE:If the charger does not charge the baery
pack under normal circumstances, return both the
baery pack and charger to your nearest Mokeneye
Authorized Service Center for electrical check.
• Charge the baery pack only with the charger
provided.
• Make sure the power supply is normal household
voltage, 110~240 volts, 50/60 Hz, AC only.
• Connect the charger to the power supply.
• For C10M1US charger, insert the plug of the
charger into the charging hole of the baery pack.
• For C20M1US/C20MK1US charger, place the
baery pack in the charger aligning raised rib on
the baery pack with the groove in the charger.
• Press down on the baery pack to be sure contacts
on the baery pack engage properly with contacts
in the charger.
• Normally the red LED on charger will come on. This
indicates the charger is in fast charging mode.
• Red LED should remain on for approximately 1to
2 hours then the green LED will come on. Green
LED on indicates baery pack is fully charged and
charger is in maintenance charge mode.
NOTICE:The green LED will remain on unl the
charger is disconnected from the power supply.
• Aer normal usage, a minimum of 1hour of
charging me is required to fully recharge baery
pack.
• The baery pack and the charger will become
slightly warm to the touch while charging. This is

9
normal and does not indicate a problem.
• Do not place the charger and baery pack in an
area of extreme heat or cold. They will work best
at normal room temperature.
NOTICE:The charger and baery pack should be
placed in a locaon where the temperature is
more than 32°F but less than 100°F.
• When baeries become fully charged, unplug the
charger from power supply and remove the
baery pack.
CHARGING A HOT BATTERY PACK
When using the tool connuously, the baeries in
the baery pack will become hot. You should let a
hot baery pack cool down for approximately 30
minutes before aempng to recharge. When the
baery pack becomes discharged and is hot, this will
cause the green LED to come on instead of the red
LED. Aer 30 minutes, reinsert the baery pack in
the charger. If the green LED connues to remain on,
return baery pack to your nearest Mokeneye
Authorized Service Center for checking or replacing.
NOTICE:This situaon only occurs when connuous
use of the tool causes the baeries to become hot. It
does not occur under normal circumstances. Refer to
"CHARGING A COOL BATTERY PACK" for normal
recharging of baeries. If the charger does not
charge your baery pack under normal
circumstances, return both the baery pack and
charger to your nearest Mokeneye Authorized
Service Center for electrical check.
TO ATTACH/DETACH BATTERY PACK
Fig. 2
Baery tools are always in
operang condion. Therefore,
remove the baery when assembling parts,
making adjustments, cleaning, when the tool is
not in use, or when carrying it at your side.
Removing the baery pack will prevent
accidental starng that could cause serious
personal injury.
To aach the baery pack:
• Align the ribs of the baery pack with the
mounng slots in the blower's baery port.
• Press the baery pack toward the blower body
unl it snaps into posion.
NOTICE: Make sure that the baery pack is
secured to the blower before beginning operaon.
NOTICE: When placing the baery pack onto the
tool, be sure that the raised rib on the baery pack
aligns with the groove inside the tool and that the
latches snap into place properly. Improper
aachment of the baery pack can cause damage
to internal components.
To detach the baery pack:
Depress the baery-release buon located on the
front of the baery pack to release the baery
pack. Pull the baery pack out and remove it from
the tool.
TO ASSEMBLE THE BLOWER TUBE
Fig. 3
a. Short pipe connecon
To clean up the workbench, just connect the front
blowpipe.
• Align the knobs inside the front tube with the
grooves in the blower housing. Push the tube
onto the blower housing and rotate clockwise
unl it snaps into place (Fig. 3a). Pull on the tube
to ensure that it is securely aached to the
blower.
b. Extension tube connecon
An extension tube can be installed for ground blow
work.
• Align the knobs inside the front tube with the
grooves in the extension tube.Push the front
tube onto the extension pipe and rotate
clockwise unl it snaps into place (Fig. 3b). Pull
on the front tube to ensure that it is securely
aached to the extension tube.
• Align the knobs inside the extension tube with
the grooves in the blower housing. Push the tube
onto the blower housing and rotate clockwise
unl it snaps into place (Fig. 3c). Pull on the tube
to ensure that it is securely aached to the
blower.
TO ASSEMBLE THE SUCTION FITTINGS
Fig. 4
Using the negave pressure, this tool can complete
the vacuuming work only by changing the posion of
the tube, the blower housing, the front tube and the
combinaon of the collecon bag.
• Align the knobs inside the short tube in front of
dust bag with the grooves in the air outlet at the
front of the blower housing. Push the bag onto
the blower housing and rotate clockwise unl it
snaps into place (Fig. 4a). Pull on the bag to
ensure that it is securely aached to the blower.
• Align the knobs inside the front tube with the
grooves in the air inlet on the side of the fan.Push
the front tube onto the blower and rotate
clockwise unl it snaps into place (Fig. 4b). Pull on
the front tube to ensure that it is securely
aached to the blower.
VARIABLE-SPEED TRIGGER SWITCH
Fig. 5
NOTICE: Before pulling the trigger to start the
blower, ensure that it is not in contact with any
object.
• Your tool is equipped with a variable-speed
trigger switch. The variable-speed trigger switch
delivers higher speed with increased trigger
pressure and lower speed with decreased trigger
pressure.
• The trigger depth limit depends on the speed dial
scale.
Always remove the blower during
work breaks and aer finishing
work.

10
3-SPEED DIAL
Fig. 6
Your tool is equipped with a 3-speed dial, which
allows you to blow the wood chips on the tabletop,
dry leaves on the garden floor, and suck small debris
at a suitable wind speed, thereby enhancing the
overall performance of the tool and helping to avoid
excessive baery consumpon.
a. The variable-speed dial is used to adjust the air
flow.
b. Turn the dial to increase or decrease the speed.
Posion “1” selects the slowest speed.
Posion “3” selects the fastest speed.
c. Adjust the air flow of the blower to suit the task
at hand.
d. As the speed increases, the baery duraon
decreases.
e. The dial can be adjusted on either side of the
blower housing.
TO OPERATE THE BLOWER
Fig. 7,8
• While working, always hold the blower by the
grip area(s).
• To keep from scaering debris, blow around the
outer edges of a debris pile. Never blow directly
into the center of a pile.
• To reduce sound levels, limit the number of
pieces of equipment used at any one me.
• Use rakes and brooms to loosen debris before
blowing. In dusty condions, slightly dampen
surfaces if water is available.
• Conserve water by using power blowers instead
of hoses for many lawn and garden applicaons,
including areas such as guers, screens, paos,
grills, porches, and gardens.
• Watch out for children, pets, open windows, or
freshly washed cars, and blow debris safely
away.
• Aer using blowers or other equipment, clean
up! Dispose of debris properly.
MAINTENANCE
When servicing, use only idencal
replacement parts. Use of any
other parts could create a hazard or cause product
damage.
Periodically inspect the enre product for damaged,
missing, or loose parts such as screws, nuts, bolts,
caps, etc. Tighten securely all fasteners and caps
and do not operate this product unl all missing or
damaged parts are replaced. Please contact
customer service or an authorized service center for
assistance.
CLEANING
To avoid serious personal injury,
always remove the baery pack
from the tool when cleaning or performing any
maintenance.
• Always keep tool clean (especially venlaon
slots).
• Avoid using solvents when cleaning plasc parts.
Most plascs are suscepble to damage from
various types of commercial solvents and may
be damaged by their use.
• Wipe the surface with a dry cloth to remove dirt,
dust, oil, grease, etc.
Do not at any me let brake fluids,
gasoline, petroleum-based
products, penetrang oils, etc., come in contact
with plasc parts. Chemicals can damage, weaken
or destroy plasc which may result in serious
personal injury.
STORAGE
• Disconnect the baery pack.
• Clean all foreign material from the air inlets of
the blower.
• Store indoors in a place that is inaccessible to
children. Keep away from corrosive agents, such
as garden chemicals and deicing salts.
SERVICE
Prevenve maintenance
performed by unauthorized
personnel may result in misplacing of internal wires
and components which could cause serious hazard.
We recommend that all tool service be performed by
a MOKENEYE Factory Service Center or Authorized
MOKENEYE Service Staon.