Monitor Audio Gold W15 User manual

owners manual

Contents
1
Introduction
Thank you for your purchase of Monitor Audio Gold W15 subwoofer, which has been designed and constructed using quality
systems and materials to provide years of enjoyment, reliability and pride of ownership.
This product, as with all of the Gold Series range, is hand crafted from top to bottom using traditional woodworking skills for our
sumptuous cabinets, married with the state of the art technology of our renowned drive units.
Music is and should be a natural enhancement of life. It stimulates the imagination, changes your mood, helps you relax, and
provides endless hours of entertainment.
Please read through this manual to familiarize yourself with any safety advice and how best to set up your subwoofer to achieve
the very best listening experience.
Please retain this manual for future reference.
monitoraudio.com
Contents{ {1
Introduction{ {1
Gold W15 Features{ {2
LEO{ {2
How it Works{ {2
Unpacking { {3
Spiked Foot Fixing For Carpeted Floors { {3
Spiked Foot Fixing For Wooden/Hard Floors { {3
Positioning{ {3
"NQMJˌFS1BOFMBOE%JTQMBZ{ {4
Remote Control{ {6
Set Up{ {7
'BDUPSZ4FUUJOHT{ {7
1PXFS$ZDMF{ {7
Initial Settings Using an AV Processor/Receiver{ {7
Initial Settings Using 2 Channel (L & R) Stereo Inputs { {8
Running LEO{ {8
.FOV4ZTUFN{ {8
Low Pass Filter{ {8
Phase{ {9
EQ{ {9
LEO{ {10
4BWJOHZPVS4FUUJOHT{ {10
Selecting the Presets{ {10
Night Mode{ {11
Auto On{ {11
%JTQMBZ$POUSPM{ {11
'BDUPSZ3FTFU{ {11
4QFDJˌDBUJPOT{ {12
Owner Information{ {13
ENGLISH

Gold W15 Features
q $PNQBDUEFTJHOXJUIGPSXBSEˌSJOHpMPOHUISPXXPPGFS
q $MBTT%BNQMJˌFSTFDUJPOXJUIBEWBODFE4.1464XJUDI.PEF1PXFS4VQQMZ6OJU
q %ZOBNJDQPXFSMJNJUFS%41%JHJUBM4PVOE1SPDFTTJOHDPOUSPMPGUIFQPXFSBNQMJˌFSNPOJUPSTBWBJMBCMFQPXFSBOEMJNJUT
certain frequencies dependant on available power reserve.
q Sealed cabinet for ultimate bass control and ease of installation.
q All features and settings adjustable by remote control.
q 'VMM%41$POUSPM XJUIBMM GVODUJPOTDPOUSPMMFE JOUIF EJHJUBMEPNBJOQSPWJEJOHNPSFBEWBODFEDPOUSPMPGDPNQMFYˌMUFS
characteristics than conventional analogue circuitry.
q 3 Memory locations per input.
q "VUPNBUJDDPOUSPMPGJOQVUTPVSDFTFHB-'&JOQVUBOEBOBMUFSOBUJWFJOQVUTVDIBTDIBOOFMTUFSFPIJˌBNQMJˌFSDBO
share a single Gold W15. It will switch automatically between the two.
q YQSFTFU&2TFUUJOHT.VTJD.PWJFT*NQBDU0ˋ
q -&0SPPNDPSSFDUJPOTZTUFN
q "VUPTXJUDIPOPˋPS7USJHHFSJOQVU$POUSPMMFECZ%41UPQSPWJEFBDDVSBUFBVUPNBUJDTXJUDIPOXIFOBOJOQVUTJHOBMJT
detected.
q Front mounted IR sensor and display.
q Night mode setting.
LEO
-&0-JTUFOJOH&OWJSPONFOU0QUJNJ[FSuJTUIFBVUPNBUJDSPPNDPSSFDUJPOTZTUFNGFBUVSFPOUIF(PME8
How it Works
5IF%"VEJPu-&0TPVOEQSPDFTTJOHVTFTBNJDSPQIPOFDPOOFDUFEUPUIF(PME8UPMJTUFOUPJUTBDPVTUJDSFTQPOTFBULFZ
QPTJUJPOT JO UIF SPPN 5IF -&0 TZTUFN HFOFSBUFT TFWFSBM TQFDJBM BVEJP TJHOBMT UIBU BMMPX UIF JOUFSOBM %41 %JHJUBM 4JHOBM
1SPDFTTPSUPVOEFSTUBOEIPXUIF(PME8TPVOETXJUIJOJUTFOWJSPONFOU0ODFUIF%41IBTFTUBCMJTIFEUIFCBTFMJOFTPVOE
characteristics, several specially selected frequencies will be tested. These frequencies have been selected to detect room mode
FˋFDUT5IF%41JTVTFEBTFDPOEUJNFUPDBMDVMBUFXIFSFUIFTPVOEJTUPPTUSPOHBOEXIFSFJUJTUPPXFBL*UVTFTUIJTJOGPSNBUJPO
to generate a special correction frequency curve for each situation. The DSP is used a third time to determine the best correction
curve and the best way to implement that curve. These three steps are all done in a single measurement from the microphone.
5IFDPSSFDUJPOJTUIFOTUPSFEJOUIFBNQMJˌFSEFMJWFSJOHUIFCFTUTPVOEQPTTJCMFGSPNUIBUUJNFGPSXBSE
With the Gold W15 custom tuned to the room, all that is left to do is sit back and enjoy the new sonic experience.
(PME80XOFST.BOVBM2
-&0TMBOE-JTUFOJOH&OWJSPONFOU0QUJNJ[FSTM are Trade Marks of D2Audio®.
-&0TM and D2Audio are Registered Trademarks of Intersil Corporation

Unpacking
$BSFNVTUCFUBLFOBUBMMUJNFTXIFOIBOEMJOHUIF(PME8EVFUPUIFFYUSFNFXFJHIUPGUIFQSPEVDU8FSFDPNNFOEBUXP
person lift wherever appropriate.
The feet/spike assemblies, 12v trigger cable and mains power cord/s are contained within the packaging and should be removed.
1MFBTFTFMFDUUIFQPXFSDPSE BQQSPQSJBUFUPZPVS$PVOUSZMPDBUJPO .BJOTWPMUBHFTFMFDUJPO GPS 7BDPS7BD
operation is factory preset. Do not adjust.
5PSFNPWFUIF(PME8GSPNJUTDBSUPOQMBDFTPNFQSPUFDUJWFNBUFSJBMPOUIFˍPPSBOEIBWJOHSFNPWFEBOZJUFNTPGQBDLJOH
GSPNUIFUPQPGUIFQBDLDBSFGVMMZMJGUUIFJOOFSTMFFWFGSPNUIFDBSUPO"MTPTFFJDPOTPOUIFDBSUPO3FNPWFˌYJOHUBQFGSPNUIF
CBHBOEFYQPTFUIFCBTFPGUIFDBCJOFUUPBMMPXˌUUJOHPGUIFTQJLFEGFFUJOUPUIFUISFBEFEJOTFSUTBTEFTDSJCFECFMPX
Spiked Foot Fixing For Carpeted Floors
5IFTQJLFEGPPUBTTFNCMZJODPSQPSBUFTBTQJLFGPSVTFPODBSQFUFEˍPPSTBOEBMTPBTPGUQPMZNFSQBEGPSVTFPOXPPEFOPSUJMFE
ˍPPST
Please ensure there are no hidden wires under the carpet, or trailing mains leads that could be damaged by the spikes.
5IFGPPUDPNFTGVMMZBTTFNCMFEGPSVTFPODBSQFUFEˍPPST"MMUIBUJTSFRVJSFEJTˌYJOHJOUPUIFDBCJOFU5IJTJTBDIJFWFECZTJNQMZ
screwing the feet fully into the 4, threaded inserts in the underside of the cabinet. If your carpet has a very thick pile, remove the
TPGUQPMZNFSQBEGSPNUIFGPPUUPFOTVSFUIFTQJLFHPFTSJHIUUISPVHIUIFDBSQFUPOUPUIFˍPPS8JUIHSFBUDBSFUVSOZPVSDBCJOFU
the right way up. Place the cabinet in your desired location, and check that it is level on all sides. If it is slightly uneven, unscrew
UIFGPPUBUUIFMPXFTUQPJOUBOEDIFDLBHBJO$POUJOVFUIJTQSPDFTTVOUJMUIFDBCJOFUJTGVMMZMFWFM6TFUIFMPDLJOHOVUPOUIFGPPU
UPˌYJUJOQMBDFBOEUPTUPQBOZVOXBOUFEWJCSBUJPOT
Spiked Foot Fixing For Wooden/Hard Floors
'PSVTFPOTPMJEˍPPSTPSXIFSFTQJLFTBSFJOBQQSPQSJBUFJUJTQPTTJCMFUPVTFUIFGPPUXJUIPVUUIFTQJLFJOTFSU5PVTFUIFGPPUJO
this manner carefully grip the knurled portion of the spike and rotate anti clockwise to unscrew the spike fully.
:PVNBZˌOEJUFBTJFSUPˌSTUSFNPWFUIFQPMZNFSQBEUPHBJONPSFQVSDIBTFPOUIFTQJLF
The pad should be replaced before carrying out the levelling operation previously described.
Positioning
The Gold W15 should now be sited in the most suitable position, preferably not directly in the corner of a room as this may
DBVTFFYDFTTJWFCBTTCPPN0ODFBEFTJSBCMFQPTJUJPOJTBDIJFWFEJUJTJNQPSUBOUUPDIFDLJGUIFDBCMFTBSFMPOHFOPVHIUPSFBDI
comfortably without being under tension. Leave the Gold W15 unplugged until you are happy with it’s location.
Never connect or disconnect any of the input connections with the Gold W15 switched on.
0QUJNBMDPOUSPMTFUUJOHTXJMMEFQFOEFOUJSFMZPOZPVSTZTUFNDPOˌHVSBUJPOSPPNBOEQFSTPOBMUBTUFT
3monitoraudio.com
ENGLISH

1
2
4
5
6
7
10a
8
9
10
12
3
"NQMJˌFS1BOFMBOE%JTQMBZ
1. 3$"-JOF-FWFM*OQVUT4UFSFP-FGU3JHIU
'PSDPOOFDUJPOUPBDIBOOFMTUFSFPBNQMJˌFSTZTUFN$POOFDUJPOTIPVMECFQSPWJEFECZBQBJSPGIJHIRVBMJUZTJHOBM
DBCMFTGSPNUIFQSFPVUTFDUJPOPGBOBNQMJˌFS4XJUDIJOHCFUXFFOUIF4UFSFPJOQVUBOE-'&JTEPOFBVUPNBUJDBMMZ5IF-'&
XJMMUBLFQSJPSJUZJGB-'&BOE4UFSFPTJHOBMJTQSFTFOUFEBUUIFTBNFUJNF/PUFDBCMFMFOHUITTIPVMEOPUFYDFFENFUSFT
to avoid interference from other electrical appliances.
2. 3$"-JOF-FWFM0VUQVUT4UFSFP-FGU3JHIU
5PCFVTFEUPGFFEBEEJUJPOBMTVCXPPGFSTJOBEEJUJPOUPUIF(PME8CZmEBJTZDIBJOnUZQFDPOOFDUJPO5IFPVUQVUTBSFMJOL
PVUPOMZDPOOFDUJPOTBOEEPOPUQSPWJEFBOZGPSNPGˌMUFSJOH
3. -'&*OQVU3$"5ZQF
5IJTJOQVUJTUPCFVTFEXIFODPOOFDUJOHUIF(PME8UPBO"7BNQMJˌFSSFDFJWFS8IFOVTJOHUIF-'&JOQVUUIFDSPTTPWFS
GVODUJPO JO UIF NFOV TFUVQ JT OPU VTFE 5IJT JT EVF UP UIF DSPTTPWFS GVODUJPO CFJOH DPOUSPMMFE CZ UIF "7 BNQMJˌFS
processor to which it is connected. Please refer to the crossover table on page 9 for further advice on which setting to use.
Input between LFE and Stereo input is switched automatically.
11
13
(PME80XOFST.BOVBM4

4. -'&0VUQVU-JOL3$"5ZQF
5PCFVTFEUPGFFEBEEJUJPOBMTVCXPPGFSTJOBEEJUJPOUPUIF(PME8CZmEBJTZDIBJOnUZQFDPOOFDUJPO5IFPVUQVUJTBMJOL
PVUPOMZDPOOFDUJPOBOEEPFTOPUQSPWJEFBOZGPSNPGˌMUFSJOH
5. 64#$POOFDUPS
5IJTJTQSPWJEFEUPVQEBUFUIFˌSNXBSFJOUIF(PME8
6. 7PMU5SJHHFS*OQVU_$FOUSF1JO7ED
'PSFYUFSOBMQPXFSDPOUSPMGSPN"7BNQMJˌFS3FDFJWFSUPUIF(PME8NFUSFMFBETVQQMJFE5IJTWPMUTJHOBMJT
TVQQMJFECZUIF"7BNQSFDFJWFSBOEUFMMTUIF(PME8UPUVSOPOGSPNTUBOECZNPEF5IJTBMMPXTBNPSFBDDVSBUFMZ
DPOUSPMMFENFUIPEPGUIFBVUPPOPˋGVODUJPO*UJTBMTPBMPUNPSFFOFSHZFˎDJFOU5IFTUBOECZGVODUJPOPOUIFSFNPUF
XJMMOPUCFPQFSBCMFXIFOVTJOHUIFWUSJHHFS
7. Power LED
5IJT-&%JOEJDBUFTUIBUUIFNBJOTQPXFSJTDPOOFDUFEBOEUVSOFEPO*GUIF-&%JT3&%UIF(PME8JTJOTUBOECZNPEF
waiting to receive an audio signal, an instruction from the encoder/ remote or a signal from the 12v trigger. If it is green,
UIFVOJUJTPQFSBUJPOBMBOEUIFEJTQMBZXJMMTIPXBTJOHMFSFEEPUEFGBVMUPQFSBUJPOBMEJTQMBZ
8. 7PMUBHF4FMFDUJPO4XJUDI
Factory preset to suit the voltage of the country of origin. This should not be adjusted.
9. Mains Power Switch
.BJOTmSPDLFSTXJUDInQSPWJEJOHPWFSBMMQPXFSPˋBOEPOBVUP*OUIFPOBVUPNPEFUIFVOJUXJMMUVSOPOXIFOBOJOQVU
TJHOBMJTTFOTFEPSUIFFODPEFSQPXFSCVUUPOPOSFNPUFQSFTTFEBOEXJMMUVSOPˋBGUFSNJOVUFTXIFOUIFTJHOBMJT
SFNPWFETPVSDFUVSOFEPˋ"MUFSOBUJWFMZXIFOVTJOHUIFWUSJHHFSTFFBCPWFXIFOUIFTPVSDFJTUVSOFEPOPSPˋ
10. IEC Mains Power Connector/Fuse Location
5IF(PME8JTTVQQMJFEXJUIBUXPQJONBJOTJOQVUTPDLFUGPSDPOOFDUJPOUPUIFNBJOTTVQQMZ6TF0/-:UIFBQQSPQSJBUF*&$
NBJOTMFBEQSPWJEFEXJUIUIFQSPEVDU"MTPˌUUFEJTBOFYUFSOBMNBJOTGVTF*GBGVTFCMPXTEVSJOHPQFSBUJPOBTQBSFGVTFJT
provided within the fuse holder for replacement. If you wish to change the fuse, you can do this by removing the IEC mains
MFBEBOEDBSFGVMMZMFWFSJOHPVUUIFPSJHJOBMGVTFGSPNJUTIPMEFSCFMPXUIF*&$NBJOTJOQVUTPDLFUBPQQPTJUF*GUIFGVTF
CMPXTBHBJOJUJTBEWJTBCMFUPTFFLIFMQGSPNBOBVUIPSJTFETFSWJDFBHFOU%0/05BUUFNQUUPSFˌUBGVSUIFSGVTFBTUIJT
DPVMESFTVMUJOTFSJPVTEBNBHFUPUIFBNQMJˌFSVOJU
11. Display
The default operating display will show a single dot in the middle. When powering up it will run through a set cycle showing
the input and the preset being used. For full details of the menu system, please refer to page 10
12. -&0.JDSPQIPOF*OQVU
6TFEUPTFUUIFTVCXPPGFSVQUPBEKVTUGPSUIFSPPNBDPVTUJDT3FGFSUPQBHF
13. 1VTI5VSO$POUSPM#VUUPO&ODPEFS
5IJTHJWFTZPVDPOUSPMPGZPVS(PME8:PVDBOBEKVTUUIFWPMVNFCZUVSOJOHUIFDPOUSPMCVUUPOBOEFOUFSUIFNFOV
TZTUFN1VTIJOHUIFSPUBSZFODPEFSBMMPXTBDDFTTPGUIFNFOVTZTUFNSFGFSUPQBHF
5monitoraudio.com
ENGLISH

Remote Control
9
1
10
2
311
412
5
13
614
7
8
1. Mute
Toggle between mute and normal operation. Mutes output
so nothing can be heard, and can only be accessed by the
remote.
2. Preset 1
.FNPSZ 1SFTFU   *OEFQFOEFOU GPS FBDI JOQVU 3FGFS UP
QBHF
3. Preset 2
.FNPSZ 1SFTFU   *OEFQFOEFOU GPS FBDI JOQVU 3FGFS UP
QBHFT
4. Preset 3
.FNPSZ 1SFTFU   *OEFQFOEFOU GPS FBDI JOQVU 3FGFS UP
QBHFT
5. 6Q"SSPX
*ODSFBTFT7PMVNFBOEXIFOJOUIFNFOVTZTUFNBEKVTUT
the selected option.
6. Left Arrow
Allows scrolling back through the menu system.
7. Down Arrow
Decreases volume and when in the menu system, adjusts
the selected option.
8. %JTQMBZ#SJHIUOFTT
"EKVTUTUIFJOUFOTJUZPGUIFEJTQMBZ3FGFSUPQBHF
9. 4UBOE#Z
Manually turns the Gold W15 on , out of stand by mode, or
puts it into stand by mode. This does not function when
Auto on is selected.
10. "VUP0/
5PHHMFTUIF"VUP0OGFBUVSFPOBOEPˋ8IFOPOUIFVOJU
JTGVMMZBVUPNBUJDJOPQFSBUJPO8IFOPˋUIFVTFSIBTUP
UVSOUIF(PME8POBOEPˋ3FGFSUPQBHF
11. Night Mode
-JNJUT UIF PVUQVU CZ E# XJUIPVU MPPTJOH BOZ PG UIF
EZOBNJDTPGUIF(PME83FGFSUPQBHF
12. -&0$BMJCSBUJPO
3VOTUIF-&0SPPNFRVBMJTBUJPOTZTUFN3FGFSUPQBHF
13. Enter
Selects desired menu option.
14. Right arrow
&OUFSTUIFNFOVTZTUFN"MMPXTTDSPMMJOHUISPVHIUIFNFOV3FGFSUPQBHF
(PME80XOFST.BOVBM6

Set Up
0ODFJOQPTJUJPOBOEDBCMFTIBWFCFFOSPVUFEOPMPOHFSUIBO
NFUSFTUPBWPJEJOUFSGFSFODFDPOOFDUUIFNUPUIF(PME
W15. Mains power cable should be connected last. Do not play
any music at this stage.
NOTE: The entire set up procedure can be done via the control
panel or remote control handset.
NOTE: The Gold W15 automatically switches between inputs.
There is no option to do this manually. The LFE input will take
priority over the Stereo input. The display will show either
/)( or 6W(BTQBSUPGUIFQPXFSDZDMFTFFCFMPX
NOTE: There are 3 memory locations for user settings for each
input. Please refer to page 10.
'BDUPSZ4FUUJOHT
The default settings are:
LPF:I[TUFSFPJOQVUPOMZ
Slope Angle:E#0DUBWFTUFSFPJOQVUPOMZ
Phase: 0 degrees
EQ:0ˋ
LEO: 0ˋ
7PMVNFE#/PUFUIJTJTBMPXTFUUJOHBOETIPVMECFTFUUP
E#CFGPSFDPOˌHPSJOH
These should be treated as the initial setting when setting up
ZPVSQSPEVDU'VSUIFSˌOFUVOJOHPGUIFTFUUJOHTDBOCFEPOFJG
you feel these factory settings do not match your environment
or tastes.
1PXFS$ZDMF
The Gold W15 can be powered up using either the encoder, the
remote, or fully automatically. It will go through the following
sequence:
Press Encoder/ press Power button on remote/ receive signal
> display shows 21 for 2 seconds > the input for 5 seconds,
eg /)( > then the selected preset for 3 seconds, eg 1 > Then
UIFEFGBVMUPQFSBUJOHTDSFFOJTEJTQMBZFETJOHMFEPUJOUIF
DFOUSFPGUIFEJTQMBZ
If no signal is received for 10 minutes, it will go back into
standby mode. If the power button on the remote is pressed it
will enter standby mode. In both cases the display will show
2)) for 10 seconds and then display nothing.
Initial Settings Using an AV Processor/
Receiver
$POOFDUBTJOHMFJOUFSDPOOFDUDBCMFOPMPOHFSUIBONFUSFT
GSPNBO"7QSPDFTTPSSFDFJWFSUPUIFDPOOFDUJPONBSLFE-'&
JOQVU*GZPVIBWFBOBEEJUJPOBMTVCXPPGFSUIF-'&0VUDBOCF
used to supply the signal.
6TJOHUIF-'&JOQVUOFHBUFTUIF(PME8nTDSPTTPWFSˌMUFS
5IJTOFFETUPCFTFUPOUIF"7QSPDFTTPSSFDFJWFS1MFBTFSFGFS
to the product user manual for further information. As a guide,
the crossover should be set up in accordance with the low
GSFRVFODZMJNJUPGUIFNBJOTQFBLFSTTFFUBCMFPOQBHF
#FGPSFSVOOJOHUIFBVUPTFUVQPOUIF"7QSPDFTTPSSFDFJWFS
SFGFS UP UIF "7 FRVJQNFOUnT PXOFST NBOVBM DBSSZ PVU UIF
following initial steps:
q 3VOUIF-&0SPPNFRVBMJTFS1BHF
q 4FUUIFWPMVNFUPE#1BHF
q 1IBTFUP1BHF
q &2UP0''1BHF
q -&0UP0/ 1BHF-FPUVSOT PO BVUPNBUJDBMMZBGUFS
calibration
When the above settings have been made, you can run the
BVUPTFUVQPGUIF"7BNQMJˌFS'VSUIFSQFSTPOBMJTBUJPOBOE
adjustment can be made after the auto set up has been run by
BEKVTUJOHUIF&2*UJTBMTPTVHHFTUFEUIBUUIFTFUUJOHTPGUIF
auto set up are checked against our recommended settings
depending on the rest of your system. Do not be afraid to
BEKVTUUIFNPOZPVS"7FRVJQNFOU
7monitoraudio.com
ENGLISH

Initial Settings Using 2 Channel (L & R)
Stereo Inputs
4UFSFP -  3 JOQVU NBZ CF SFRVJSFE JG VTJOH B DIBOOFM
TUFSFPBNQMJˌFSPSBOBNQMJˌFSXJUIOP-'&PVUQVU$POOFDU
YJOUFSDPOOFDUDBCMFTMFGUBOESJHIUGSPNBOBNQMJˌFSUP
DPOOFDUJPOTNBSLFE-JOF*OQVUT-3
8JUIZPVSQSFBNQMJˌFSTFUUPBMPXMFWFMTFUUIFTVCXPPGFS
up using the suggested guide below before playing any music/
test tones.
q 3VOUIF-&0SPPNFRVBMJTFSTFFCFMPX
q 4FUUIFWPMVNFUPE#1BHF
q LFE should be set in accordance to you main speakers
1BHF
q 1IBTFUP1BHF
q &2UP0''1BHF
q -&0UP0/ 1BHF-FPUVSOT PO BVUPNBUJDBMMZBGUFS
calibration
Running LEO
#FGPSFFOBCMJOHUIF-&0SPPNDPSSFDUJPOJUOFFETUPCFTFUVQ
To do this follow these simple steps.
1. Connect the jack lead of the microphone to the jack
socket next to the encode as in the illustration below.
2. Place the microphone at your listening position at
approximate ear height.
NOTE: Ensure there are no obstructions between the
Gold W15 and the microphone other than those normally
in the room.
3. )PMEEPXOUIFo$BMpCVUUPOPOUIFSFNPUFGPSTFDPOET
8IFOJUTUBSUTUIFEJTQMBZXJMMTIPXo$"-pBOEBUFTU
tone will be heard.
4. 8IFOUIF-&0DBMJCSBUJPOIBTˌOJTIFEUIFEJTQMBZXJMM
SFWFSUCBDL UPUIFIPNFTDSFFOTJOHMFSFEEPUJOUIF
NJEEMFPGUIFEJTQMBZ5IF-&0GVODUJPOXJMMBMTPIBWF
been turned on.
.FOV4ZTUFN
Low Pass Filter
5IF -PX 1BTT 'JMUFS -1' TFUT UIF DSPTTPWFS QPJOU BOE UIF
slope angle with the main speakers. It is only enabled in
stereo mode. When using the LFE input, the crossover setting
PQUJPOJTOPUBWBJMBCMFBTJUJTDPOUSPMMFECZUIF"7BNQMJˌFS
receiver.
The table opposite gives suggested crossover points
dependant on the main speakers. The slope angle depends
PO IPX TIBSQMZ ZPV XBOU UIF IJHI GSFRVFODJFT UP SPMM Pˋ
5IJTDBOCFBEKVTUFEJOE#PDUBWFTUFQT*UJT
recommended that when partnering the Gold W15 with sealed
MPVETQFBLFST B TMPQF PG E#PDUBWF JT VTFE BOE XIFO
QBSUOFSJOH XJUI QPSUFE MPVETQFBLFST E#PDUBWF JT VTFE
However, experimentation is still advised.
Setting the LPF Using the Remote
With the Gold W15 powered up and out of standby mode, follow
the next steps to set the LPF:
1. Press the RIGHT arrow. The display will change to /3)
2. Press ENTER. The display will change to show the
current setting, eg.
3. 1SFTTUIF61%08/BSSPXTUPBEKVTUUIFTFUUJOH
4. 1SFTT&/5&3UPTFMFDUBOETBWF5IFEJTQMBZXJMMˍBTI
UXJDFUPDPOˌSNTFMFDUJPOBOEUIFOEJTQMBZUIFTMPQF
angle, eg  
5. 1SFTTUIF61%08/BSSPXTUPBEKVTUUIFTFUUJOH
6. 1SFTT&/5&3UPTFMFDUBOETBWF5IFEJTQMBZXJMMˍBTI
UXJDFUPDPOˌSNTFMFDUJPOBOEUIFOEJTQMBZ/3)
Setting the LPF Using the Control Panel
Encoder
With the Gold W15 powered up and out of standby mode, follow
the next steps to set the LPF:
1. Press the encoder down. The display will change to
/3)
2. Press the encoder again to enter the LPF menu. The
display will change to show the current setting, eg. 
3. Rotate the encoder left or right to change the setting
4. Press the encoder to select and save. The display will
ˍBTIUXJDFUP DPOˌSNTFMFDUJPOBOE UIFOEJTQMBZUIF
slope angle, eg  
5. Rotate the encoder left or right to change the setting
6. Press the encoder to select and save. The display will
ˍBTIUXJDFUPDPOˌSNTFMFDUJPOBOEUIFOEJTQMBZ/3)
Connect microphone
here
(PME80XOFST.BOVBM8

Suggested Crossover Frequencies
#FMPXJTBUBCMFUIBUTIPXTTVHHFTUFEDSPTTPWFSGSFRVFODJFT
to set the Gold W15 to when partnering main speakers.
Phase
The Phase Control is used to synchronise any delay between
the Gold W15 and main/ satellite speakers. When the Gold
W15 is in phase with the main/ satellite speakers the sound
should be full bodied. Sit in a normal listening position
whilst adjusting the phase settings. When set correctly the
MPDBUJPO PG UIF TVCXPPGFS TIPVME CF BMNPTU VOEFUFDUBCMF
Experimentation is advisable. However it should be noted that
in most cases the phase control should be set to 0 degrees,
FTQFDJBMMZ XIFO VTJOH B EJHJUBM "7 QSPDFTTPS PS "7 SFDFJWFS
BNQMJˌFS5IFQIBTFBOHMFDBOCFBEKVTUFEJOTUFQTPG
180, 270, degrees.
Setting the Phase Using the Remote
With the Gold W15 powered up and out of standby mode, follow
the next steps to set the Phase:
1. Press the RIGHT arrow. The display will change to /3)
2. Press it a second time so the display changes to 3+$
3. Press ENTER. The display will change to show the
current setting, eg. 
4. 1SFTTUIF61%08/BSSPXTUPBEKVTUUIFTFUUJOH
5. 1SFTT&/5&3UPTFMFDUBOETBWF5IFEJTQMBZXJMMˍBTI
UXJDFUPDPOˌSNTFMFDUJPOBOEUIFOEJTQMBZ3+$
Setting the Phase Using the Control
Panel Encoder
With the Gold W15 powered up and out of standby mode, follow
the next steps to set the Phase:
1. Press the encoder down. The display will change to /3)
2. Rotate the encoder 1 position to the right. 3+$ will be
displayed
3. Press the encoder again to enter the Phase menu. The
display will change to show the current setting, eg. 
4. Rotate the encoder left or right to change the setting
5. Press the encoder to select and save. The display will
ˍBTIUXJDFUPDPOˌSNTFMFDUJPOBOEUIFOEJTQMBZ/3)
EQ
5IFSF BSF GPVS &2 PQUJPOT UP DIPPTF GSPN .VTJD .PWJFT
*NQBDUBOE0ˋ5IFTFDBOCFTFUBUBOZUJNFJOBDDPSEBODF
with personal choice or the predominant operation of the
system. They can also be selected and stored during the set
up process from the menu system.
%VSJOH UIF TFU VQ UIFZ BSF OVNCFSFE    BOE Pˋ  5IF
EFˌOJUJPOTBOEBOFYBNQMFPGUIFDVSWFBSFCFMPX
&2.VTJD
&2.PWJFT
&2*NQBDU
"EKVTUJOH UIF &2 TFUUJOHT XJMM DIBOHF UIF QFSDFJWFE PVUQVU
levels of the Gold W15. With this in mind, it is highly
SFDPNNFOEFE UP SVO UIF BVUP TFU VQ PG UIF "7 1SPDFTTPS
Receiver again.
Type of Main Speaker Crossover
Control Setting
-BSHFˍPPSTUBOEJOHTQFBLFS )[
4NBMMˍPPSTUBOEJOHTQFBLFS )[
-BSHFTUBOENPVOUCPPLTIFMGTQFBLFS )[
4NBMMTUBOENPVOUCPPLTIFMGTQFBLFS )[
Small satellite speaker )[
9monitoraudio.com
ENGLISH