Monoprice 612800 User manual

3-Color LED Moving Head Light

PID 612800

User's Manual

SAFETY WARNINGS AND GUIDELINES

Prior to operation, check the unit and power cord for physical damage. Do not use if

physical damage has occurred.

Before plugging the unit into a power outlet, ensure that the outlet provides the

same type and level of power required by the device.

This device uses a grounded power cord and requires a ground connection for safe

operation. Ensure that the power source has a proper ground connection. Do not

modify the plug or use a "cheater" plug to bypass the ground connection.

Do not expose this device to rain, water, or moisture of any kind. Do not use in

extremely dusty environments. Do not touch the device with wet hands.

This device has no user serviceable parts. Do not attempt to open, service, or

modify this device.

This device is intended for indoor use only.

Ensure that there are no flammable materials within about 3 feet of this device.

Ensure that there is at least 20 inches of ventilation space around this unit.

Unplug this device from the power source when not in use.

Do not operate this device when the ambient temperature exceeds +104°F (+40°C).

Do not connect this light to a dimmer pack.

Avoid direct eye exposure to the light from this device.

Disconnect the unit from the power source when replacing the fuse. Replace the

fuse only with the same type.

Do not obstruct the fan or vent openings. Ensure that the unit is properly ventilated.

Keep the original packaging material for use when transporting the device.

FEATURES

8 or 13 channel DMX-512 LED moving yoke

Variable electronic strobe

Variable electronic dimmer (0-100%)

Vector speed channel for pan/tilt, RGB color mixing, and color macros

Built-in movement macros via master/slave or DMX

User-selectable basic or advanced operating modes

User-selectable pan/tilt ranges

LED display menu with option for inverted display

Ability to invert pan/tilt operations

Cooling fan included

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering,

purchasing, and delivery experience is second to none. If you have any problem with your

order, please give us an opportunity to make it right. You can contact a Monoprice

Customer Service representative through the Live Chat link on our website

www.monoprice.com or via email at [email protected]. Check the website for

support times and links.

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x 3-Color LED Moving Head Light

1x AC Power Cord

1x User's Manual

DMX 8-CHANNEL SUMMARY

Channel

Function

Pan

Tilt

Dimmer/Strobe

Red Dimmer

Green Dimmer

Blue Dimmer

Vector Speed (Pan/Tilt)

Reset

DMX 13-CHANNEL SUMMARY

Channel

Function

Pan

Pan Fine

Tilt

Tilt Fine

Vector Speed (Pan/Tilt)

Dimmer/Strobe

Red Dimmer

Green Dimmer

Blue Dimmer

Color Macros

Vector Speed (Color)

Movement Macros

Reset

DMX SETUP

A DMX-512 controller is needed to run synchronized light shows using two or more lighting

effects devices. Each device must be daisy-chained to the next one in line, to a maximum

of 32 devices on a single data link. Connecting more than 32 devices requires the use of a

DMX optically isolated splitter. The maximum total length of DMX data lines should be less

than 1640 feet (500 meters).

If you are building your own DMX cables, use data-grade cabling with the following

electrical characteristics:

2-conductor, shielded twisted-pair

Capacitance less than 30 pF/ft. between conductors

Capacitance less than 55 pF/ft. between each conductor and the shield

Resistance less than 20 ohms/1000 ft.

Nominal impedance between 100 ~ 140 ohms

FUSE REPLACEMENT

If the fuse blows it should be replaced only with exactly the same type and rating of fuse.

Before changing the fuse, turn off the device and unplug it from the power source. Use a

small, flat-head screwdriver to pry open the fuse holder. Insert the new fuse, ensuring that

it has a secure connection in the fuse holder.

MENU OPERATION

Use the buttons beneath the digital display to navigate the unit's menu system. The

buttons perform the following functions:

Button

Function

MODE/ESC

Press to display the menu or to return to the previous menu option

Scrolls upward through menu options

DOWN

Scrolls downward through menu options

ENTER

Selects and stores the current menu or option within a menu