Monoprice 30602 User manual

0
User Guide

1
IMPORTANT SAFETY INSTRUCTIONS:
Please read user guide before using this product.
Please keep user guide for future reference.
Please read the cautions to prevent possible danger and loss of
property.
FEATURES:
High resolution: 1920×1200;
Wide voltage: DC 7-24V;
High brightness: 500cd/㎡;
High contrast: 1000:1;
CAUTIONS:
1. Please do not place the display screen towards the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do not use chemical solutions to clean this product. Please
wipe with a clean soft cloth to maintain the brightness of the surface.
4. Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the
product. Other improper adjustment may result in damage. Any further
adjustment must be performed or conducted by a qualified technician.
6. Please unplug the power and remove the battery if long-term no-use,
or thunder weather.
YP-01170715-1

2
Contents
1. PRODUCT DESCRIPTION...........................................3
2. DV BATTERY MOUNT PLATE.....................................4
3. MENU SETTING...........................................................5
4. ACCESSORIES............................................................8
5. PARAMETERS.............................................................9
6. TROUBLE SHOOTING ................................................9

3
1. PRODUCT DESCRIPTION
1．MENU Dial:
Menu key: press the dial to display menu on the screen when
screen is lit.
Options key: left or right sliding the dial in the menu screen to
select the desired menu option.
Confirm key: press the dial to confirm the selected option.
2．EXIT：
To return or exit the menu function.
3．F1、F2 User-definable buttons
F1：Peaking F2：Lever Meter
4. Power on/off.
5．Battery indicator light.
6．Speaker.
7. HDMI output interface.
8. HDMI input interface.
9. DC 12V power input.
10. Battery plate switch.

4
2. DV BATTERY MOUNT PLATE
Standard mounts process
①First place battery plate into the slot, then slide the switch to left.
②Then slide the battery plate down into the slot.
Following two types of batteryplates are suitable for this device, the standard
option of battery plate model is F970.
MODEL: F-970 MODEL: LP-E6
DV Battery Mount Plate Specification:
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.
Model LP-E6 for battery of Canon DSLR:
5D Mark II/5D Mark III/EOS6D/EOS7D/EOS60D/EOS70D；

5
3. MENU SETTING
Before setting the functions, please make sure the device is
connected correctly.
3-1. F1~F2User-definablefunctionbuttons:
Select "MEMU -- SYSTEM -- F1 Configuration/F2 Configuration" to
custom F1 / F2 shortcut settings. Then left or right sliding the dial to
choose options.
Select option via sliding to the left or right.
Press to confirm option as default, then press EXIT to exit.
Functions of F1-F2 buttons can also be customized: Center Marker,
Aspect Marker, Check Filed, Underscan, Scan, Aspect, DSLR,
Freeze, H/V Delay, Peaking, False Color, Exposure, Histogram,
Level Meter.
F1-F2：2 user-definable function buttons
Default function:
F1：Peaking F2：Level Meter
3-2. Dial
Sliding the dial to activate the brightness bar when not under the
menu display
Slide the dial to adjust the value of option directly.
Press “EXIT” to exit if accidentally enter the menu.
After enter the Volume menu, press the dial to select among of
Brightness, Contrast, Saturation, Tint, Sharpness, Volume, and Exit.
3-3. MENU Operation
When power on, press dial on the device, the menu of function setting
will display on the screen.
Sliding the dial to select the menu option;
Then press the dial to confirm;
Press “EXIT” button to exit menu.

6
Main Menu
Picture, Marker, Function, Waveform, Audio, System
Picture
Brightness
0~100
Contrast
0~100
Saturation
0~100
Tint
0~100
Sharpness
0~100
Color Temp
6500K, 7500K, 9300K, User (R.G. B)
Red Gain
0~255
Note: Available only under
“User” mode to choose the
color value you need.
Green Gain
0~255
Blue Gain
0~255
Red Offset
0~511
Green Offset
0~511
Blue Offset
0~511
Marker
Center Marker
ON, OFF
Aspect Marker
OFF, 16:9, 1.85:1, 2.35:1, 4:3, 3:2
Safety Marker
OFF, 95%, 93%, 90%, 88%, 85%, 80%
Marker Color
Red, Green, Blue, White, Black
Grid
OFF, ON
Marker Mat
OFF, 1, 2, 3, 4, 5, 6, 7
Thickness
2, 4, 6, 8
Function
Scan
Aspect, Pixel To Pixel, Zoom
Aspect
Full, 16:9, 1.85:1, 2.35:1, 4:3, 3:2
Underscan
OFF, ON
Check Field
OFF, Mono, Red, Green, Blue
Zoom
x1.5, x 2, x 3, x 4
Freeze
OFF, ON
DSLR
OFF, 5D2, 5D3
Waveform
Peaking
OFF, ON
Peaking Color
Red, Green, Blue, White, Black
Peaking Level
0~100
False Color
OFF, ON
Exposure
OFF, ON
Exposure Level
0~100
Histogram
OFF, ON
Audio
Volume
0~100
Level Meter
OFF, ON
System
Language
English, Chinese
OSD Timer
10s. 20s, 30s
Image Flip
OFF, H, V, H/V
Back Light
0~100
F1 Configuration
Peaking
F2 Configuration
Level Meter
Reset
Press to confirm after selected.

7
4. ACCESSORIES
Standard:
1. Folding sun shade cover 1 piece
2. Silicon rubber case 1 piece
3. HDMI A/C cable 1 piece
4. Battery plate(F970) 1 pieces
5. Hot shoe mount 1 piece
6. Manual 1 copy

8
5. PARAMETERS
6. TROUBLE SHOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup or not.
2. Poweron but no pictures:
Check whether the cables of HDMI are correctly connected or not. Please
use the standard power adapter coming with the product package.
Improper power input may cause damage.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected or not.
Broken or loose pins of the cables may cause a bad connection.
4. When on the picture shows size error:
Press “MENU →FUNCTION →Underscan” to zoom in/out pictures
automatically when receiving HDMI signals
5. Other problems:
Please press dial button and choose “MENU→SYSTEM→ Reset →ON”
6. According to the ISP, the machine cannot function properly:
ISP for program upgrades, non-professionals do not use. Please reboot
your device if press accidentally!
Note: due to constant effort to improve products and product
features, specifications may changewithout notice.
Panel
7”IPS
Physical Resolution
1920×1200 (324ppi)
Brightness
500 cd/㎡
Contrast
1000: 1
ViewingAngle
170°/ 170°(H/V)
Input Voltage
DC 7-24V
Input Signal
HDMI
Output Signal
HDMI
Power Consumption
≤11W
Operating Temperature
-20℃~60℃
Storage Temperature
-30℃~70℃
Dimension (LWD)
182*124*20.5mm
Weight
320g