Monoprice 34711 User manual

28”
4K
User’s Manual
P/N 34711
Monoprice 28” UHD HDR Freesync Monitor

3840x2160p @60Hz maximum video resolution
5ms GTG response time
300 cd/m² brightness
More than 1.07G colors
170°/160° vertical and horizontal viewing angles
Two HDMI and two DisplayPort input

1x28” Monitor
DC INHDMI 2 HDMI 1DP 2 DP 1
AUDIO
OUT

DP 2: DisplayPort video input supporting the DisplayPort 1.2 specification at resolutions
up to 3840x2160p @60Hz.
DP 1: DisplayPort video input supporting the DisplayPort 1.2 specification at resolutions
up to 3840x2160p @60Hz.
HDMI 2: HDMI video input supporting the HDMI 2.0 specification at resolutions up to
3840x2160p @60Hz.
HDMI 1: HDMI video input supporting the HDMI 2.0 specification at resolutions up to
3840x2160p @60Hz.
LED Indicator/IR
signal receiver Base Screen

Speaker Hole VESA hole
100mm x 100mm
I/O Port Keypad
MENU
SELECT
V.+
V.-
▲
▼

SOURCE
MUTE SCALE
MENU
EXIT
SOURCE
MUTE
SCALE

F1
P
F2
MENU
EXIT
HDMI 1
HDMI 2
DP 1
DP 2
AUTO

Main Menu
Item
Sub Menu
Item Option Function
Level can be adjusted from 0 to 100
0～100BRIGHTNESS
0～100
CONTRAST
Choose the picture mode:
For videos games there is three mode:
GAME / FPS / RTS to choose according to
your use.
STANDARD
GAME
MOVIE
TEXT
FPS
RTS
PICTURE
MODE
Dynamic contrast ratio (to add more
contrast).
OFF
Level can be adjusted from 0 to 4
ON
DCR
BRIGHTNESS
H.POSITION 0～100 Not available
V.POSITION 0～100
CLOCK 0～100
PHASE 0～100
WIDE
4 : 3
ASPECT
IMAGE
COLOR TEMP.
COOL
GREEN
BLUE
NA
RED
COLOR
TEMP.
OSD H.POS. 0～100
OSD V.POS. 0～100
OSD TIME 0～60 Time can be adjusted from 5 sec to 60 sec.
OSD
SETTINGS
Level can be adjusted from 0 to 100
SHARPNESS 0～4
Not available
Not available
Not available
Choose aspect ratio
WARM
USER
Choose color temperature.
When selectiong USER you can adjust
each level of RED,GREEN,BLUE.
Level can be adjusted from 0 to 100
0～100
Level can be adjusted from 0 to 100
0～100
Level can be adjusted from 0 to 100
0～100
LANGUAGE
Choose the OSD menu language
English etc...
Level can be adjusted from 0 to 100
Level can be adjusted from 0 to 100
TRANSPARENCY
0～100
Level can be adjusted from 0 to 100
COLOR
AUTO. ADJUST
IMAGE
AUTO. ADJUST
NA
RESET
Reset all settings to or original factory settings.
AUTO
POWER DOWN
ON
OFF Monitor power will turn off when no signal.
RESET
HDR OFF
AUTO
2084
Set up the HDR function

0/25/50/75/100
SIGNAL
SOURCE
HDMI 1
HDMI 2
DP 1
DP 2
Select signal source.
LOW BLUE LIGHT
Main Menu
Item
Sub Menu
Item Option Function
About FreeSync
MISC.
Make sure your graphic card supports FreeSync (AMD only but not all AMD graphic card
does).
If the graphics card does not support freesync, turn the function off on the monitor.
About HDR
VOLUME Level can be adjusted from 0 to 100.
FREESYNC ON Set up Freesync function ON/OFF (to be set
to OFF when using non-AMD card).
OD Set the overdrive ON or OFF. Setting it ON
will response time faster.
OFF
0～100
ON
OFF
Before using this feature, please make sure the input signal source are HDR function of
stream in the future.

34711
28”(711.2mm)
24.5”x13.4”(620.93x341.28mm)
3840x2160p @60Hz
170°/160°
5ms
300 cd/m²
＞1.07G