Monoprice 38623 User manual

Wi-Fi® Mesh Router AC1200 Dual Band Whole Home System
P/N 38623, 38961, 39056
User's Manual

2
CONTENTS
SAFETY WARNINGS AND GUIDELINES.........................................................................................................................................................4
INTRODUCTION..................................................................................................................................................................................................................5
CUSTOMER SERVICE......................................................................................................................................................................................................5
PACKAGE CONTENTS...................................................................................................................................................................................................6
PRODUCT OVERVIEW...................................................................................................................................................................................................6
LED INDICATIONS............................................................................................................................................................................................................6
Router...................................................................................................................................................................................................................................6
Extenders .......................................................................................................................................................................................................................... 7
ROUTER INSTALLATION.............................................................................................................................................................................................. 7
CONNECTING TO THE ROUTER.............................................................................................................................................................................8
Wired ....................................................................................................................................................................................................................................8
Wi-Fi for Windows Users....................................................................................................................................................................................8
Wi-Fi for Mac Users..................................................................................................................................................................................................9
SETTING UP THE ROUTER........................................................................................................................................................................................10
EXTENDER PLACEMENT ........................................................................................................................................................................................... 12
ADDING EXTENDERS................................................................................................................................................................................................... 13
Using a Web Browsers........................................................................................................................................................................................14
Using the Pair Button...........................................................................................................................................................................................14

3
Verifying the Installation ..................................................................................................................................................................................15
TOUCHLINK..........................................................................................................................................................................................................................15
Configuring TouchLink........................................................................................................................................................................................15
Using TouchLink........................................................................................................................................................................................................16
THE MESHGO APP.........................................................................................................................................................................................................16
TROUBLESHOOTING .................................................................................................................................................................................................... 17
TECHNICAL SUPPORT.................................................................................................................................................................................................18
SPECIFICATIONS..............................................................................................................................................................................................................19
REGULATORY COMPLIANCE...............................................................................................................................................................................20
Notice for FCC ...........................................................................................................................................................................................................20
Notice for Industry Canada............................................................................................................................................................................. 21
EU Declaraton of Conformity....................................................................................................................................................................... 22
WEEE Information .................................................................................................................................................................................................. 23
Safety Notice..............................................................................................................................................................................................................24

4
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety
warnings and guidelines. Please keep this manual in a safe place for future reference.
This device is intended for indoor use only.
Do not expose this device to water or moisture of any kind. Do not place drinks or other
containers with moisture on or near the device. If moisture does get in or on the device,
immediately unplug it from the power outlet and allow it to fully dry before reapplying
power.
Do not touch the device, the power cord, or any other connected cables with wet hands.
Do not expose this device to excessive vibration.
Do not subject the product to extreme force, shock, or fluctuations in temperature or
humidity.
Do not expose this device to excessively high temperatures. Do not place it in, on, or near a
heat source, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
Prior to operation, check the unit and power cord for physical damage. Do not use if
physical damage has occurred.
Before plugging the unit into a power outlet, ensure that the outlet provides the same
type and level of power required by the device.
Unplug this device from the power source when not in use.
Take care to prevent damage to the power cord. Do not allow it to become crimped,
pinched, walked on, or become tangled with other cords. Ensure that the power cord does
not present a tripping hazard.

5
Never unplug the unit by pulling on the power cord. Always grasp the connector head or
adapter body.
Ensure that power is turned off and disconnected before making any electrical
connections.
Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For
stubborn deposits, moisten the cloth with warm water.
This device has no user serviceable parts. Do not attempt to open, service, or modify this
device.
INTRODUCTION
The Monoprice Mesh Router provides whole home coverage for up to 4500 square feet. The
patented TouchLink technology offers one-touch easy and fast connections. With the free Mesh
Go app for Android™and iOS® mobile devices, the connection is seamless and hassle-free. The
Monoprice Mesh Router is user friendly with additional options to configure your wireless settings
and server to your own preferences.
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your order,
please give us an opportunity to make it right. You can contact a Monoprice Customer Service
representative through the Live Chat link on our website www.monoprice.com or via email at
[email protected]. Check the website for support times and links.

6
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed below. If
anything is missing or damaged, please contact Monoprice Customer Service for a replacement.
1x Mesh Router
2x Mesh Extenders
1x Ethernet Cable
3x AC Power Adapters
1x User's Manual
PRODUCT OVERVIEW
LED INDICATIONS
Router
Solid Purple: The router is starting up.
Solid Blue: The Internet is connected.

7
Flashing Blue: The router is in TouchLink mode, allowing you to connect directly without a
password. It also indicates that the newly added extender is being paired with the router.
Flashing Red: The router is disconnected.
Extenders
Solid Purple: The extender is starting up.
Solid Blue: The connection between the extender and the router is good.
Solid Red: The connection between the extender and the router is weak. Place the router in a
more open area or shorten the distance between the router and extender.
Flashing Blue: The extender is in TouchLink mode, allowing you to connect directly without a
password. It also indicates that the extender is pairing with the router.
Flashing Red: The extender is disconnected.
Note: When adding extenders, the furthest extender may display solid purple and red flashing
before turning solid blue.
ROUTER INSTALLATION
1. Ensure that the router is powered off.
2. Place the router near your modem. For best results, place the router in an elevated, open
position.
3. Using the included Ethernet Cable, plug one end into the Internet port on the router, then
plug the other end into the LAN port on your modem.

8
4. Plug one of the included AC Power Adapters into the DC 5V connector on the router, then
plug the adapter into a nearby AC power outlet.
5. Slide the On/Off Switch to the ON position.
Note: If you want to use more than two wired connections, use an Ethernet switch.
CONNECTING TO THE ROUTER
Wired
To make a wired connection, plug one end of an Ethernet
cable into the Ethernet port on your computer, then plug the
other end into either the LAN1 (Gigabit) or LAN2
(10/100Mbps) port on the router.
Wi-Fi for Windows Users
Perform the following steps on your Windows® PC to make a Wi-Fi® connection with the router.
1. Ensure that your computer's Wi-Fi is turned on.
2. Click the Wi-Fi icon on the taskbar.

9
3. Locate and select the MeshGo entry.
Wi-Fi for Mac Users
Perform the following steps on your Mac® to make a Wi-Fi®
connection with the router.
1. Ensure that your computer's Wi-Fi is turned on.
2. Click the Wi-Fi icon in the upper right corner of the screen,
then locate and select the MeshGo entry.

10
SETTING UP THE ROUTER
Perform the following steps to configure your router.
1. Open a web browser, then type either http://ap.setup or 192.168.10.1 and press the Enter
key.
2. Type admin into the name field, then click the Login button.
3. Select Router.

11
4. Use the drop-down list next to the WAN Type entry to select the type of WAN you have.
You can select DHCP (Dynamic IP), PPPoE, or Static IP.
Note: If you have a DSL line and your ISP only gave you an Account Name and Password,
choose PPPoE. If you have a cable or fiber connection, choose DHCP (Dynamic IP). If your
ISP gave you an IP Address, Subnet Mask, and Default Gateway, choose Static IP.
5. The default Mesh SSID is MeshGo. You can use the default or change the name, as desired.
6. Use the drop-down list next to the Security Type entry to select the type of security you
want to use. We recommend WPA/WPA2 Mix, as shown in the image below.
7. Create a password in the Mesh Password field. Note that passwords are case sensitive.

12
8. Click the Apply button to save your settings. Installation and basic setup takes a few
minutes to complete.
EXTENDER PLACEMENT
The extenders that come with this kit have been paired with the router at the factory, so all you
need to do is position them in your home, plug them in, and turn them on to extend the Wi-Fi®
signal throughout your home. Proper positioning is an important part of extending the Wi-Fi
signal.
The Wi-Fi signal radiates outward from the router and from each extender. The distance it can
cover is largely dependent on the size of your home and the materials it is made from. Brick and
concrete will attenuate the signal more than wooden construction. Additionally, the presence of
electronics, metal materials, and water can reduce the signal strength.
The following guidelines can help in determining where to place the router and extenders.
The extenders work best when their square LED lights are solid blue.
Generally, your mesh Wi-Fi® devices work best when they are no more than two rooms
from each other.
Ensure the router and extenders are evenly spread
out, but not too far from each other.
If you live in a multi-story home, put your mesh Wi-Fi®
device in an open area and try to keep it clear of
clutter.

13
Position the Wi-Fi devices to avoid obstructions, such as wall, doors, and aquariums to
improve performance.
Place the devices in a central location, away from anything that might block the signal,
such as metal objects, bodies of water, reinforced concrete walls, foil-insulated walls, or
another other similar construction materials.
Elevating the devices can greatly improve coverage.
After positioning the extenders, perform the following steps to check that each extender has a
good connection.
1. Open a web browser on your computer, then type http://ap.setup or 192.168.10.1 in the
address bar.
2. Log in to the router. The default user name is admin and there is no password.
3. Click Status > Device List to see a list of connected devices and their connection status.
ADDING EXTENDERS
You can purchase additional extenders to increase the Wi-Fi® signal coverage in your home. There
are two ways to include the additional extenders in the Mesh network.

14
Using a Web Browser
Perform the following steps to add the extender using a web browser.
1. Open a web browser on your computer, then type
http://ap.setup or 192.168.10.1 in the address bar.
2. Log in to the router. The default user name is admin and
there is no password.
3. Go to Wi-Fi > Mesh Network.
4. Type the extender's 5G MAC address into the MAC Address
field, then click the +button. The 5G MAC address can be
found on the label on the bottom of the extender.
Using the Pair Button
1. Place the new extender near the router, then plug it into a nearby AC power outlet.
2. Press and hold the Reset/Pair Button on the router for 1 second. The LED flashes blue.
3. Within two minutes, press and hold the Reset/Pair Button on the extender for 1 second.
After the LED indicators on both the router and extender turn solid blue, pairing is
complete.
4. Place the extender in the desired location.

15
Verifying the Installation
After positioning the new extender, perform the following steps to check that each extender has
a good connection.
1. Open a web browser on your computer, then type http://ap.setup or 192.168.10.1 in the
address bar.
2. Log in to the router. The default user name is admin and there is no password.
3. Click Status > Device List to see a list of connected devices and their connection status.
TOUCHLINK
TouchLink is a system that allows you to connect to Wi-Fi® without inputting a password.
TouchLink is activated by touching the Gray Cap on the router or the White Cap on one of the
extenders.
Configuring TouchLink
Perform the following steps to configure the amount of time that TouchLink will remain active
after touching the Gray Cap on the router or White Cap on an extender.
1. Open a web browser on your computer, then type http://ap.setup or 192.168.10.1 in the
address bar.
2. Log in to the router. The default user name is admin and there is no password.
3. Click Wi-Fi > TouchLink > Timer, then set the time to any value between 30 and 200.

16
Using TouchLink
1. Touch the Gray Cap on the router or the White Cap on an extender.
2. Open the Wi-Fi® settings on your mobile device.
3. Locate and select the entry that ends with _Touch. By default, it is MeshGo_Touch.
THE MESHGO APP
The MeshGo app allows you to easily control the router and extenders using your
smartphone or tablet.
1. Search for MeshGo (see the icon to the right) in the App Store on iTunes®,
the Android™ Market app, or the Google Play™ store. Scan the QR code
below to go directly to the download page.
2. Download and launch the MeshGo app.

17
TROUBLESHOOTING
1. The login page does not appear after entering http://ap.setup in the web browser.
Ensure your computer is set to obtain an IP address automatically.
Verify that you entered the address correctly. Alternatively, try typing http://192.168.10.1
in the web browser.
Use a different web browser and try again.
Reboot the router and try again.
2. I cannot access the Internet.
Connect a computer directly to the modem using an Ethernet cable to verify that you
can access the Internet. If you cannot, contact your service provider.
Open a web browser and enter http://ap.setup or http://192.168.10.1 and run the quick
setup again.
Reboot the router and try again.
3. How can I restore the router to the factory default settings?
While the router is powered on, press and hold the Reset/Pair Button on the router for
6 seconds.

18
4. I cannot remember my Administration Management password.
Refer to 3 above to reset the router to the factory default settings, then login using the
default admin user name with no password.
5. I forgot my wireless network password.
Open a web browser and enter http://ap.setup in the address bar. Go to Wi-Fi > Wi-Fi
Configuration to see the password.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product recommendations.
If you ever need assistance with your new product, please come online to talk to one of our
friendly and knowledgeable Tech Support Associates. Technical support is available through the
online chat button on our website www.monoprice.com or through email by sending a message
to [email protected]. Check the website for support times and links.

19
SPECIFICATIONS
Model
38623
Router Ports
1x 10/100/1000Mbps WAN port,
1x 10/100/1000Mbps LAN port,
1x 10/100Mbps LAN port
Extender Ports
2x 10/100/1000Mbps LAN ports,
1x 10/100Mbps LAN port
Supported WAN Types
PPPoE, Dynamic IP, Static IP, WISP
Supported Wireless Standards
IEEE 802.11b/g/n/a/ac
Frequency Bands
2.4GHz, 5GHz
Flash Memory
64MB
DDR2 RAM
512MB
Maximum Transmit Power
2.4GHz: 20dBm
5GHz: 23dBm
Sensitivity
802.11b: -93dBm
802.11g: -73dBm
802.11a: -76dBm
802.11n: -68dBm
Wireless Speeds
2.4GHz: 300Mbps
5GHz: 867Mbps
Supported Wireless Security
WPA/WPA2, WPA-PSK, WPA2PSAK

20
DHCP Setting
Server, Client
Antennas
4x 3dBi internal omni-directional antennas
Coverage
4500 sq. ft.
Input Power
5 VDC, 2A
AC Adapter Input Power
100 ~ 240 VAC, 50/60 Hz
Operating Temperature
+32 ~ +104°F (0 ~ +40°C)
Storage Temperature
+14 ~ +158°F (-10 ~ +70°C)
Operating and Storage Humidity
10 ~ 90% RH, noncondensing
Dimensions (each)
3.5" x 3.5" x 3.7" (90 x 90 x 95 mm)
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Modifying the equipment without Monoprice's authorization may result in the equipment no
longer complying with FCC requirements for Class B digital devices. In that event, your right to